← Blowers & other equipment · series 4203

Stihl 4203 · Section F · 6 of 12 · 30 parts

Backplate

Fits SR 320, SR 400.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111112131415161718192202122232425272828292934567899
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (30)

PosPart numberDescriptionQty
1 4203 700 3850 Backplate Fitment / change note → 1
2 not sold separately Bracket not available as a separate item 3
3 not sold separately Bracket not available as a separate item 3
4 not sold separately Spring not available as a separate item 3
5 9074 478 4475 Pan head self-tapping screw IS-P6x21.5 Fitment / change note → 3
6 9074 478 4425 Pan head self-tapping screw IS-P6x19 Fitment / change note → 3
7 4203 791 5600 Support frame 1
8 4203 703 6901 Bracket 2
9 9074 478 4425 Pan head self-tapping screw IS-P6x19 Fitment / change note → 4
10 4203 790 8003 Back rest pad 1
11 0751 030 7651 Rivet 5.9x17 4
12 4203 790 8001 Back rest pad 1
13 4203 710 9102 Lap belt option 1
14 4203 710 9100 Lap belt → replaced by 4203 710 9102 TI 6/2003 option 1
15 0751 030 7651 Rivet 5.9x17 option 2
16 4203 710 9000 Harness 2
17 4203 007 1002 Harness buckle 2
18 9408 021 4530 Rivet shank 4x8x6 4
19 9409 021 4420 Rivet head 4x8 4
20 4203 710 6900 Hook with webbing 2
21 4203 791 4600 Hook 2
22 4119 890 3400 Combination wrench → replaced by 4128 890 3400 TI 41/1997 1
23 0000 890 2300 NLA Screwdriver 1
23 0000 890 2305 Screwdriver 1
24 0000 967 3701 Warning pictogram BR 1
25 4203 760 8100 Protective screen option 1
27 1121 791 1200 Retainer Fitment / change note → 1
28 1121 791 6105 Pan head screw Fitment / change note → 3
29 9074 478 4425 Pan head self-tapping screw IS-P6x19 Fitment / change note → 6
Not numbered on the diagram — assemblies, kits and options
— 4203 760 9050 AV-Spring 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · BR 320 / BR 400 / SR 320 / SR 400

BR / SR 320 / 400: spring-mounted backplate and retained older-machine parts

4203 700 3800 → 4203 700 3850; three of each spring mounting component.

  • The new backplate includes THREE springs 4203 708 0800, THREE retaining plates 4203 706 1100, THREE IS P6 x 21.5 screws 9074 478 4475 and THREE IS P6 x 19 screws 9074 478 4425. Figure 352TI001 KN identifies backplate 1, plate 2, spring 3, long screw 4 and short screw 5; these are local figure/table positions, not canonical IPL positions.
  • The unchanged-number IS P6 x 19 screw quantity changes from SIX TO THREE. The original backplate is supplied only until existing stocks are exhausted. Annular buffers 4203 790 9900 are no longer installed, but remain available for older machines, as do safety retainer 1121 791 1200 and pan head screw 1121 791 6105. Removal from new production is not withdrawal of older-machine spares.
  • The related outer fan casing requires the new through-hole described on page 2. No field conversion, hole dimension or mounting torque is supplied; the figure does not authorize drilling an old casing.
  • Historical TI 14/1996 evidence, not current stock or a verified physical interchange claim. Introduction is in progress; no numeric serial boundary is given. Shared IPL sheets do not extend this note to BR 320 L or later models. No hardware operation was performed.

Source: TI 14/1996, p. 1 — BR / SR 320 / 400: spring-mounted backplate and retained older-machine parts.

Part numbers (9)
  • 4203 700 3800 — Original backplateTI14/1996 listed configuration · Only the note’s stated models and configuration
  • 4203 700 3850 — New backplate, includes items 2–5TI14/1996 listed configuration · Only the note’s stated models and configuration
  • 4203 706 1100 — Retaining plate, threeTI14/1996 listed configuration · Only the note’s stated models and configuration
  • 4203 708 0800 — Spring, threeTI14/1996 listed configuration · Only the note’s stated models and configuration
  • 9074 478 4475 — Spline screw IS P6 x 21.5, threeTI14/1996 listed configuration · Only the note’s stated models and configuration
  • 9074 478 4425 — Spline screw IS P6 x 19, six → threeTI14/1996 listed configuration · Only the note’s stated models and configuration
  • 4203 790 9900 — Annular buffer, older-machine spareTI14/1996 listed configuration · Only the note’s stated models and configuration
  • 1121 791 1200 — Safety retainer, older-machine spareTI14/1996 listed configuration · Only the note’s stated models and configuration
  • 1121 791 6105 — Pan head screw, older-machine spareTI14/1996 listed configuration · Only the note’s stated models and configuration

Wrong number or missing part for the SR 320, SR 400? Report a correction →