← TS 400

Stihl 4223 · Section F · 6 of 22 · 11 parts

Tank housing 1 44 576 634 (53.1999)

Fits TS 400.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
11023456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (11)

PosPart numberDescriptionQty
1 4223 351 0510 Tank housing, left 1
2 4223 353 9200 Grommet 1
3 4223 350 5800 Tank vent Fitment / change note → 1
4 not sold separately Hose 3.1x5.7x65 mm, R3 not available as a separate item 1
5 9517 003 5000 Cylindrical roller 3x5 1
6 1120 358 8105 Vent insert 1
7 4114 353 1600 Valve → replaced by 1128 353 1600 TI 25/1996 1
8 0000 358 1810 Filter 1
9 4223 353 2300 Cap 1
10 0000 358 1811 Filter Fitment / change note → 1
Not numbered on the diagram — assemblies, kits and options
— 0000 930 2803 Hose 3.1x5.7 mm x 1 m, R3 not illustratedoption 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · TS 400

TS 400 tank vent: second sintered filter and seating collar

Tank vent 4223 350 5800 keeps its number; added filter 0000 358 1811 seats only against the collar.

  • The vent is to receive a SECOND sintered filter, item 1, to protect its valve from dust and dirt. Cross-section 338TI010KN distinguishes the added lower filter from the existing upper filter; no number for the other filter is supplied.
  • When replacing the sintered filter, push it into the tank-vent opening ONLY UNTIL IT RESTS AGAINST THE COLLAR, as shown. The drawing supplies no numerical seating depth, pressure setting or tightening torque; do not infer bottoming farther into the bore.
  • The summary retains tank vent 4223 350 5800 and adds included filter 0000 358 1811 with no original filter number. All other parts remain as before. Introduction is CONTINUOUS, not the AV serialX35 033 958. Unchanged vent number cannot prove filter contents.
  • Remark 1 says the unchanged version continues to be supplied while stocks last. Last-TI 13.96, documentation 5915 and copyright 1996 are bibliographic. The later tank-housing sheet has its own printed1999/1 44 576 634 applicability; that later sheet is navigation for the retained vent number, not a replacement cutoff for this1996 modification.
  • This is historical source guidance, not present stock or a verified physical interchange. Later IPL sheets are navigation, not a reconstruction of the 1996 configuration. No hardware operation was performed.

Source: TI 45/1996, p. 2 — TS 400 tank vent: second sintered filter and seating collar.

Part numbers (2)
  • 4223 350 5800 — Tank ventUnchanged number; second filter added · TS 400; historical mixed old/new contents possible
  • 0000 358 1811 — Sintered filterAdded second filter, item 1 · TS 400 vent; seat only to collar

Wrong number or missing part for the TS 400? Report a correction →