← TS 400

Stihl 4223 · Section Q · 16 of 22 · 22 parts

Cutquik cart

Fits TS 400.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101011111212131415161718192204041426789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (22)

PosPart numberDescriptionQty
1 4201 790 2300 Guide tube option 1
2 4201 967 4200 Tag option 1
6 4201 708 8402 Hexagon head screw M10x18 option 1
7 4201 791 9500 Rubber bushing option 1
8 4201 711 0903 Axle option 1
9 4201 790 5700 Wheel option 2
10 0000 988 1900 Felt ring option 2
11 4201 791 9200 Cap option 2
12 9455 621 2150 Circlip 20x1.2 option 4
13 4201 790 6300 NLA Counterweight option 1
14 9008 319 1830 Hexagon head screw M8x25 option 1
15 4201 708 8405 Hexagon head screw M10x70 option 1
16 4201 792 9100 Guard option 1
17 4201 792 6000 Bracket option 1
18 9079 319 0960 Flat head screw M5x12 option 2
19 4201 792 9501 Strap option 1
20 9039 488 0680 Self-tapping screw M4x16 option 4
40 4201 710 3000 Wheel option 2
41 0000 988 1900 Felt ring option 4
42 4201 717 2001 Cap option 4
Not numbered on the diagram — assemblies, kits and options
— 4201 710 1403 Cutquik cart Fitment / change note → option 1
— 4201 007 1033 Splash guard mounting kit option 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · TS 400

TS 400 Cutquik cart: separate mounting kit required

4223 007 1000 is required and must be ordered separately from the cart.

  • Existing special accessories can be used with TS 400: Cutquik cart with mudguard 4201 710 1403, cutting-depth-limiter kit 4201 007 1049, water-tank attachment kit 4201 007 1048 and pressurized-water-tank kit 4201 007 1037.
  • Mounting kit 4223 007 1000 is REQUIRED to secure TS 400 on the Cutquik cart. It is NOT INCLUDED WITH THE CART and MUST BE ORDERED SEPARATELY. Do not present a bare cart purchase as a complete TS 400 attachment kit.
  • The summary table is a roster of separate accessories, not contents of one kit. No tank capacity, pressure setting, later FW 20-cart compatibility or unconditional interchange with later mounting kits is printed.
  • Historical TI guidance for the source-era named models only; no future-model compatibility or current stock guarantee. No hardware operation was performed.

Source: TI 37/1995, p. 6 — TS 400 Cutquik cart: separate mounting kit required.

Part numbers (5)
  • 4201 710 1403 — Cutquik cart with mudguardexisting accessory · TS 400; TS 400 Cutquik cart: separate mounting kit required
  • 4223 007 1000 — TS400 cart mounting kitrequired; ordered separately · TS 400; TS 400 Cutquik cart: separate mounting kit required
  • 4201 007 1049 — Cutting depth limiter kitexisting accessory · TS 400; TS 400 Cutquik cart: separate mounting kit required
  • 4201 007 1048 — Water tank attachment kitexisting accessory · TS 400; TS 400 Cutquik cart: separate mounting kit required
  • 4201 007 1037 — Pressurized water tank kitexisting accessory · TS 400; TS 400 Cutquik cart: separate mounting kit required

Wrong number or missing part for the TS 400? Report a correction →