← TS 400

Stihl 4223 · Section R · 17 of 22 · 38 parts

Mounting kit - Cutquik cart

Fits TS 400.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
11011121314151617171819222021222324252627282933303132323244142435678889
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (38)

PosPart numberDescriptionQty
1 4201 712 1005 Wheel Ø 142 mm option 1
2 0000 988 1900 Felt ring option 2
3 4201 717 2001 Cap option 2
4 9455 621 2150 Circlip 20x1.2 option 1
5 4201 711 8500 Stud option 1
6 4201 711 8501 Stud option 1
7 4201 711 0700 Swivel arm option 1
8 9291 021 0180 Washer 8.4 option 3
9 9582 003 0471 Clamp lever M8 option 1
10 9220 260 1100 Hexagon nut M8 option 1
11 4201 711 0901 Axle option 1
12 4201 180 0700 Control lever option 1
13 9008 319 1780 Hexagon head screw M8x16 option 2
14 4201 790 9300 Rubber insert option 2
15 4223 791 7605 Support option 1
16 4223 792 9500 Strap option 1
17 4201 708 8401 Hexagon head screw M8x42 option 2
18 4223 716 3400 Plate option 1
19 4223 710 6605 Bow option 1
20 4223 710 9300 Wing screw option 1
21 4223 716 1500 Sleeve option 1
22 9460 624 0320 NLA E-clip 3.2 option 1
23 4223 710 9310 Wing screw option 1
24 4223 716 2800 Spacer sleeve option 1
25 4223 710 9305 Wing screw option 1
26 4223 182 4000 Support option 1
27 4221 182 4501 Torsion spring option 1
28 4221 182 2800 Lever option 1
29 9307 021 0100 Washer 4.3 option 1
30 9075 478 2995 NLA Pan head self-tapping screw IS-D4x12 option 1
31 4221 180 1101 Throttle cable option 1
32 9008 319 1800 Hexagon head screw M8x20 option 3
41 0000 988 1900 Felt ring option 2
42 4201 717 2001 Cap option 2
43 9291 021 0180 Washer 8.4 option 1
Not numbered on the diagram — assemblies, kits and options
— 4201 007 1041 NLA Depth wheel kit option 1
— 4223 007 1000 Mounting kit Cutquik cart Fitment / change note → option 1
— 4223 180 1800 Throttle control option 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · TS 400

TS 400 Cutquik cart: separate mounting kit required

4223 007 1000 is required and must be ordered separately from the cart.

  • Existing special accessories can be used with TS 400: Cutquik cart with mudguard 4201 710 1403, cutting-depth-limiter kit 4201 007 1049, water-tank attachment kit 4201 007 1048 and pressurized-water-tank kit 4201 007 1037.
  • Mounting kit 4223 007 1000 is REQUIRED to secure TS 400 on the Cutquik cart. It is NOT INCLUDED WITH THE CART and MUST BE ORDERED SEPARATELY. Do not present a bare cart purchase as a complete TS 400 attachment kit.
  • The summary table is a roster of separate accessories, not contents of one kit. No tank capacity, pressure setting, later FW 20-cart compatibility or unconditional interchange with later mounting kits is printed.
  • Historical TI guidance for the source-era named models only; no future-model compatibility or current stock guarantee. No hardware operation was performed.

Source: TI 37/1995, p. 6 — TS 400 Cutquik cart: separate mounting kit required.

Part numbers (5)
  • 4201 710 1403 — Cutquik cart with mudguardexisting accessory · TS 400; TS 400 Cutquik cart: separate mounting kit required
  • 4223 007 1000 — TS400 cart mounting kitrequired; ordered separately · TS 400; TS 400 Cutquik cart: separate mounting kit required
  • 4201 007 1049 — Cutting depth limiter kitexisting accessory · TS 400; TS 400 Cutquik cart: separate mounting kit required
  • 4201 007 1048 — Water tank attachment kitexisting accessory · TS 400; TS 400 Cutquik cart: separate mounting kit required
  • 4201 007 1037 — Pressurized water tank kitexisting accessory · TS 400; TS 400 Cutquik cart: separate mounting kit required

Wrong number or missing part for the TS 400? Report a correction →