Stihl 4224 · Section G · 7 of 15 · 52 parts
Carburetor WJ-114A
Fits TS 700.
Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.
Parts (52)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4224 121 0803 | End cover | 1 |
| 2 | 1115 122 7100 | Round head screw | 4 |
| 3 | 1115 129 1100 | Gasket | 1 |
| 4 | 1115 121 4800 | Pump diaphragm | 1 |
| 5 | 1114 121 7800 | Strainer | 1 |
| 6 | 1110 121 5100 | Inlet needle | 1 |
| 7 | 1117 121 5000 | Inlet control lever | 1 |
| 8 | 1117 121 9200 | Spindle | 1 |
| 9 | 1114 122 7400 | Round head screw | 1 |
| 10 | 4224 122 3000 | Spring | 1 |
| 11 | 4224 121 0804 | End cover | 1 |
| 12 | 1106 122 7400 | Round head screw | 4 |
| 13 | 1117 121 4700 | Metering diaphragm | 1 |
| 14 | 1116 129 0900 | Gasket | 1 |
| 15 | 4224 122 6201 | Idle speed adjustment screw | 1 |
| 16 | 4224 122 6802 | Low speed adjustment screw Fitment / change note → | 1 |
| 17 | 4224 122 6801 | Low speed adjustment screw Fitment / change note → | 1 |
| 18 | 4224 122 6701 | High speed adjustment screw | 1 |
| 19 | 4224 121 2701 | Cap | 1 |
| 20 | not sold separately | Sealing ring not available as a separate item | 1 |
| 21 | 4224 121 3001 | Choke shaft | 1 |
| 22 | 4224 121 2901 | Choke shutter | 1 |
| 23 | 1121 122 7102 | Round head screw | 1 |
| 24 | 4224 122 3602 | Sealing ring | 2 |
| 25 | 4223 121 9400 | Ring | 2 |
| 26 | 1117 122 9000 | E-clip | 4 |
| 27 | 4223 122 3001 | Spring | 1 |
| 28 | 4224 120 7103 | Throttle shaft with lever | 1 |
| 29 | 4224 122 3203 | Torsion spring | 1 |
| 30 | 1115 121 8600 | Washer | 1 |
| 31 | 1115 122 7400 | Round head screw | 1 |
| 32 | 4224 121 3301 | Throttle shutter | 1 |
| 33 | 4224 121 6604 | Lever | 1 |
| 34 | 1122 121 5606 | Fixed jet 0.65 Fitment / change note → → replaced by 4224 122 6802 TI 39/2009 | 1 |
| 35 | 1128 121 5605 | Fixed jet 0.66 Fitment / change note → | 1 |
| 36 | 4224 126 0201 | Air valve shaft | 1 |
| 37 | 4224 121 6603 | Lever | 1 |
| 38 | 4224 126 0301 | Air valve | 1 |
| 39 | 4224 122 3202 | Torsion spring | 1 |
| 40 | 4224 122 3602 | Sealing ring | 2 |
| 41 | 4224 121 9400 | Ring | 2 |
| 42 | 4224 124 2101 | Rod | 1 |
| 43 | 4224 122 9004 | E-clip | 1 |
| 44 | 4224 122 7100 | Screw | 2 |
| 45 | 9645 945 7588 | O-ring 17x3 | 2 |
| 46 | 4224 122 7801 | Oval head screw | 1 |
| 47 | 4224 182 1500 | Throttle rod | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4224 120 0601 | Carburetor WJ-114A Fitment / change note → | 1 |
| — | 1122 007 1060 | Set of carburetor parts | 1 |
| — | 4224 007 1012 | Set of gaskets | 1 |
| — | 4224 007 1019 | Set of gaskets | 1 |
| — | 4224 007 1010 | Set of gaskets → replaced by 4224 007 1012 TI 43/2007 | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · TS 700 / TS 800
TS 700 / TS 800: unchanged carburetor number requires reading the WJ index
Complete WJ-114A replaces WJ-114; the order number alone cannot distinguish them.
- Complete carburetor WJ-114 is replaced by WJ-114A while order number 4224 120 0601 stays UNCHANGED. Figure 376TI042 shows the marking location and WJ-114 versus WJ-114 A index. The new version differs in BOTH fixed jet and low-speed screw.
- Summary rows 1/2 specify old assembly including items 3/5 and new including items 4/5; other parts remain as previously per the spare-parts list. Previous complete WJ-114 is no longer factory available; complete WJ-114A can also be used on older machines. This whole-carburetor retrofit does NOT permit substituting its individual jet or low-speed screw into the old WJ-114.
- Introduction is CONTINUOUS with no numeric serial cutoff. The retained WJ-114A IPL sheets are exact-model navigation anchors; no applicability to the separate HS-314A carburetor is inferred. No mixture settings, adjustment turns or tuning speeds are supplied.
- Historical English 2009 source for TS 700 and TS 800, series 4224. Supply statements describe that source date, not current stock. No physical interchange test was performed.
Source: TI 39/2009, p. 1 · TI 39/2009, p. 2 · TI 39/2009, p. 4 — unchanged carburetor number requires reading the WJ index.
Part numbers (1)
- 4224 120 0601 — Carburetor WJ-114 / WJ-114ASame number; read marked index · TS 700 / TS 800; exact carburetor or muffler version required
Service note · TS 700 / TS 800
TS 700 / TS 800: jets and low-speed screws are index-specific
The four-row table forbids every cross-index component substitution.
- Previous fixed jet 0.66 (1128 121 5605) becomes new fixed jet 0.65 (1122 121 5606), which has a SMALLER jet bore. Simultaneously previous low-speed screw 4224 122 6801 becomes 4224 122 6802. These are TWO separate replacement relationships; the extracted text heuristic connecting jet 1122 121 5606 to screw 4224 122 6802 is not a valid supersession.
- Table 1.2.2: old 0.66 jet 1128 121 5605 is permitted in WJ-114 and NOT permitted in WJ-114A. New 0.65 jet 1122 121 5606 is NOT permitted in WJ-114 and is permitted in WJ-114A.
- The same table permits old low-speed screw 4224 122 6801 ONLY in WJ-114, NOT WJ-114A; new screw 4224 122 6802 ONLY in WJ-114A, NOT WJ-114. Previous jet AND previous screw remain available for machines with WJ-114. The new pair is not presented as an authorized conversion kit for an old WJ-114; do not infer such a conversion from simultaneous replacement or complete-carburetor retrofit.
- Summary remarks 3/4 preserve old-component supply AND defer to the service combination table. No drilling conversion, alternate jet, screw dimensions or adjustment settings are supplied.
- Historical English 2009 source for TS 700 and TS 800, series 4224. Supply statements describe that source date, not current stock. No physical interchange test was performed.
Source: TI 39/2009, p. 2 · TI 39/2009, p. 4 — jets and low-speed screws are index-specific.
Part numbers (4)
- 1128 121 5605 — Fixed jet 0.66Only WJ-114; retained supply · TS 700 / TS 800; exact carburetor or muffler version required
- 1122 121 5606 — Fixed jet 0.65Only WJ-114A · TS 700 / TS 800; exact carburetor or muffler version required
- 4224 122 6801 — Low-speed screwOnly WJ-114; retained supply · TS 700 / TS 800; exact carburetor or muffler version required
- 4224 122 6802 — Low-speed screwOnly WJ-114A · TS 700 / TS 800; exact carburetor or muffler version required
Wrong number or missing part for the TS 700? Report a correction →