← HS 72, HS 74, HS 76 · HS 75, HS 80, HS 85

Stihl 4226 · Section D · 4 of 10 · 38 parts

Carburetor WT-264

Fits HS 72, HS 74, HS 76.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111213141516171819220212223242526272829330313233343536456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (38)

PosPart numberDescriptionQty
1 4133 121 5400 Valve jet 1
2 4117 122 9402 Plug 1
3 1110 121 5100 Inlet needle 1
4 1120 122 3001 Spring 1
5 1113 121 5000 Inlet control lever 1
6 1113 121 9200 Spindle 1
7 1114 122 7400 Round head screw 1
8 4133 129 0901 Gasket 1
9 1113 121 4705 Metering diaphragm 1
10 4133 120 2201 Flange 1
11 4133 121 5200 Valve 1
12 4133 120 8600 Non-return valve 1
13 4133 121 2700 Cap 1
14 4133 121 0801 End cover 1
15 4133 122 7400 Round head screw 4
16 1114 121 7800 Strainer 1
17 1120 121 4805 Pump diaphragm Fitment / change note → 1
18 1120 129 0905 Gasket 1
19 4117 121 0803 End cover 1
20 1114 122 7100 Screw 1
21 4117 122 3006 Spring 1
22 4117 122 6200 Idle speed adjustment screw 1
23 4133 122 3200 Torsion spring 1
24 1117 122 9000 E-clip 1
25 4211 120 7100 Throttle shaft with lever 1
26 4211 121 8600 Washer 1
27 4215 121 8900 Pin 1
28 4211 122 9000 E-clip 1
29 4117 122 3007 Spring 1
30 1120 122 6705 High speed adjustment screw 1
31 4119 122 6801 Low speed adjustment screw 1
32 1115 122 3002 Spring 1
33 4117 121 3300 Throttle shutter 1
34 1110 122 7400 Round head screw 1
35 4130 121 8600 Washer 1
36 4133 120 8701 Control valve 1
Not numbered on the diagram — assemblies, kits and options
— 4226 120 0600 Carburetor WT-264 Fitment / change note → 1
— 4133 007 1060 Set of carburetor parts Fitment / change note → 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · HS 72 / HS 74 / HS 76

HS 72 / 74 / 76 WT-264: replacement pump diaphragm and truncated printed number

Original carburetor column prints 226 120 0600; do not silently repair it.

  • Pump diaphragm 1120 121 4805 replaces 4133 121 4800 as spare WITH IMMEDIATE EFFECT to standardize parts. Kit 4133 007 1060 is affected but keeps number. Original diaphragm no longer factory-available; unmodified kit/carburetor only until stocks exhausted. Summary introduction says IN PROGRESS; preserve distinct service/production wording.
  • Original WT264 carburetor column visibly prints truncated 226 120 0600, while new column prints 4226 120 0600. Original scan confirms it is not just OCR loss. Do not manufacture a validated old part number or claim a resolved numbering change. WT329/C1Q sheets are NOT included by analogy.
  • Historical TI 25/1994 guidance only. No successor or unlisted model applicability inferred. Factory supply and warranty statements are historical, not current availability or entitlement. MOQ columns are order quantities, not fitting quantities. No physical interchange test was performed.

Source: TI 25/1994, p. 6 — HS 72 / 74 / 76 WT-264: replacement pump diaphragm and truncated printed number.

Part numbers (4)
  • 4133 121 4800 — Pump diaphragmold unavailable · HS 72 / 74 / 76 WT-264: replacement pump diaphragm and truncated printed number
  • 1120 121 4805 — Pump diaphragmnew spare · HS 72 / 74 / 76 WT-264: replacement pump diaphragm and truncated printed number
  • 4133 007 1060 — Carburetor parts kitsame number; updated diaphragm · HS 72 / 74 / 76 WT-264: replacement pump diaphragm and truncated printed number
  • 4226 120 0600 — WT264 carburetornew-column number; old column truncated · HS 72 / 74 / 76 WT-264: replacement pump diaphragm and truncated printed number

Wrong number or missing part for the HS 72, HS 74, HS 76? Report a correction →