← HS 72, HS 74, HS 76 · HS 75, HS 80, HS 85

Stihl 4226 · Section C · 3 of 10 · 32 parts

Air filter, Fuel tank

Fits HS 72, HS 74, HS 76.

Parts diagrams →

Historical fitment & changes (11) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415161718192202122232425262728293304567889
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (32)

PosPart numberDescriptionQty
1 4226 129 0902 Gasket Fitment / change note → 1
2 4133 121 1602 Spacer flange Fitment / change note → 1
3 9007 319 1121 Hexagon head screw M5x56 Fitment / change note → 2
4 9210 261 0700 Hexagon nut M5 Fitment / change note → 2
5 4133 122 6900 Plug Fitment / change note → 1
6 9022 341 1050 Spline screw IS-M5x25 2
7 4226 182 7600 Tensioner 1
8 9022 341 0980 Spline screw IS-M5x16 2
9 9214 320 0700 Lock nut M5 1
10 9022 313 0680 Spline screw IS-M4x16 1
11 4114 129 0501 Gasket 1
12 4226 120 0600 Carburetor WT-264 1
12 4226 120 0601 Carburetor WT-329 1
13 9291 021 0120 Washer 5.3 2
14 4133 140 2800 Filter housing 1
15 4133 124 2800 Filter 1
16 4133 124 1500 Prefilter 1
17 4133 141 0500 Filter cover 1
18 4226 350 0401 Fuel tank 1
19 4226 007 1001 Fuel hose Fitment / change note → 1
20 0000 989 0516 Grommet Fitment / change note → 1
21 0000 350 3503 Pickup body Fitment / change note → 1
22 4226 358 0705 Fuel hose 1
23 4226 122 3900 Elbow connector 1
24 not sold separately Hose 3.1x5.7x127 mm, R3 not available as a separate item 1
25 4226 350 0503 Filler cap 1
26 4226 350 0900 Rope Fitment / change note → 1
27 0000 353 0800 Filler cap retainer 1
28 4226 080 0904 Air guide shroud 1
29 0000 967 2036 Nameplate STIHL 1
30 4226 791 7200 Sleeve 1
Not numbered on the diagram — assemblies, kits and options
— 0000 930 2803 Hose 3.1x5.7 mm x 1 m, R3 not illustratedoption 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · HS 72 / HS 74 / HS 76

HS 72 / 74 / 76: replacement tank requires shorter mounting screw

Different composite tank replaces the old tank; IS-M 5 ×18 replaces ×20.

  • Replacement fuel tank 4226 350 0405 uses a different composite material and replaces 4226 350 0400, no longer factory-available. Mounting screw IS-M5 x 20 9022 341 1020 is deleted in favor of IS-M5 x 18 9022 341 1010. Introduction IN PROGRESS, not the separate hose serial. No torque or unspecified polymer chemistry inferred.
  • Retained 2012 tank sheet instead lists tank 4226 350 0401. That later identifier does not replace the TI’s 0400/0405 evidence or establish an unprovided supersession chain.
  • Historical TI 25/1994 guidance only. No successor or unlisted model applicability inferred. Factory supply and warranty statements are historical, not current availability or entitlement. MOQ columns are order quantities, not fitting quantities. No physical interchange test was performed.

Source: TI 25/1994, p. 2 · TI 25/1994, p. 3 — HS 72 / 74 / 76: replacement tank requires shorter mounting screw.

Part numbers (4)
  • 4226 350 0400 — Fuel tankold unavailable · HS 72 / 74 / 76: replacement tank requires shorter mounting screw
  • 4226 350 0405 — Fuel tanknew composite · HS 72 / 74 / 76: replacement tank requires shorter mounting screw
  • 9022 341 1020 — IS-M5 x20 tank screwdeleted here · HS 72 / 74 / 76: replacement tank requires shorter mounting screw
  • 9022 341 1010 — IS-M5 x18 tank screwreplacement · HS 72 / 74 / 76: replacement tank requires shorter mounting screw

Service note · HS 72 / HS 74 / HS 76

HS 72 / 74 / 76: routine fuel-hose grommet conversion

Hose/grommet introduction X 29 943 802 is separate from historical end-1996 kit supply limits.

X 29 943 802 — Printed component-specific introduction, not a universal machine cutoff or unrestricted interchange guarantee.

  • FROM X 29 943 802 hose 4226 358 0704 is located by grommet 4221 353 9201. Units brought in for ANY repair or service should receive new grommet as routine. Each hose has a detailed instruction sheet; no unprovided routing is invented. Historical warranty claim recommended, not current entitlement.
  • Kit 4226 007 1001 includes hose and grommet and is supplied UP TO END OF 1996. New hose NOT separately available UNTIL END OF 1996. Old hose 4226 358 0703 remains only while stocks last. -*- is not an order number; these kit/hose restrictions do not impose a grommet discontinuation date.
  • Historical TI 25/1994 guidance only. No successor or unlisted model applicability inferred. Factory supply and warranty statements are historical, not current availability or entitlement. MOQ columns are order quantities, not fitting quantities. No physical interchange test was performed.

Source: TI 25/1994, p. 3 — HS 72 / 74 / 76: routine fuel-hose grommet conversion.

Part numbers (4)
  • 4226 007 1001 — Fuel hose kithose and grommet; up to end1996 · HS 72 / 74 / 76: routine fuel-hose grommet conversion
  • 4226 358 0703 — Fuel hoseold; stocks only · HS 72 / 74 / 76: routine fuel-hose grommet conversion
  • 4226 358 0704 — Fuel hosenew; assembly-only until end1996 · HS 72 / 74 / 76: routine fuel-hose grommet conversion
  • 4221 353 9201 — Grommetroutine service conversion · HS 72 / 74 / 76: routine fuel-hose grommet conversion

Service note · HS 72 / HS 74 / HS 76

HS 72 / 74 / 76: fuel-cap change is the HS-specific retainer

Cap, cord and hook replacements are separate from the hose cutoff.

  • Cap 4226 350 0501 replaces 4133 350 0501. ONLY difference is retainer cord and hook specially designed for HS tank: cord 0000 350 0900 becomes 4226 350 0900; hook 0000 353 0600 becomes 0000 353 0605. Cap includes both. Introduction IN PROGRESS; no serial, torque, sealing change or unrestricted other-model retrofit stated.
  • Historical TI 25/1994 guidance only. No successor or unlisted model applicability inferred. Factory supply and warranty statements are historical, not current availability or entitlement. MOQ columns are order quantities, not fitting quantities. No physical interchange test was performed.

Source: TI 25/1994, p. 3 — HS 72 / 74 / 76: fuel-cap change is the HS-specific retainer.

Part numbers (6)
  • 4133 350 0501 — Fuel filler capold · HS 72 / 74 / 76: fuel-cap change is the HS-specific retainer
  • 4226 350 0501 — Fuel filler capnew HS retainer · HS 72 / 74 / 76: fuel-cap change is the HS-specific retainer
  • 0000 350 0900 — Cordold · HS 72 / 74 / 76: fuel-cap change is the HS-specific retainer
  • 4226 350 0900 — Cordnew · HS 72 / 74 / 76: fuel-cap change is the HS-specific retainer
  • 0000 353 0600 — Hookold · HS 72 / 74 / 76: fuel-cap change is the HS-specific retainer
  • 0000 353 0605 — Hooknew · HS 72 / 74 / 76: fuel-cap change is the HS-specific retainer

Service note · HS 72 / HS 74 / HS 76

HS 72 / 74 / 76: uprated engine requires all new parts

From X 30 314 341; approximate 15% increase to 0.8 kW / 1.1 bhp is not a single-part retrofit.

X 30 314 341 — Printed introduction of the uprated HS 72/74/76 engine; not a universal series or successor cutoff.

  • FROM X 30 314 341 engine output rises approximately 15% to 0.8 kW (1.1 bhp), through different port timing, higher compression ratio, enlarged inlet port, modified transfer ports, and modified gasket and spacer flange. No numerical port timing or compression ratio is supplied.
  • Factory supply describes new cylinder, gasket and spacer flange as universal replacement parts within these named models. That wording DOES NOT remove the assembly conditions: ONLY NEW versions may repair NEW machine versions, otherwise loss of power and running problems may occur. Increasing an OLD machine to approximately 0.8 kW is possible ONLY IF ALL NEW PARTS ARE INSTALLED, with required screws, plugs and washers.
  • Cylinder mounting requires M5 x 20 screws at 10 Nm (7.5 lbf.ft); the intake assembly must satisfy the separate flange instructions. Neither the performance claim nor universal-replacement wording authorizes mixing old parts into a new engine or omitting companion hardware. Footer January 1, 1995; TI25.94 is a prior-bulletin pointer, not a missing prerequisite.
  • Historical TI 02/1995 guidance only. Factory availability and performance claims are historical, not current stock or measured results. MOQ means order quantity, not installed quantity. No unlisted-model applicability inferred. No hardware operation was performed.

Source: TI 2/1995, p. 1 · TI 2/1995, p. 2 · TI 2/1995, p. 3 — HS 72 / 74 / 76: uprated engine requires all new parts.

No additional parts-table entry added.

Service note · HS 72 / HS 74 / HS 76

HS 72 / 74 / 76: enlarged inlet gasket window

New 19 mm gasket window replaces 16 mm; a gasket alone does not deliver the full power upgrade.

X 30 314 341 — Printed introduction of the uprated HS 72/74/76 engine; not a universal series or successor cutoff.

  • Gasket 4226 129 0900 becomes 4226 129 0901. Inlet port window grows from 16 mm (0.63 in) to 19 mm (0.75 in), as shown in illustration 363TI002. New gasket MAY be installed in older machines, but the claimed full power upgrade requires all new parts; new engines may be repaired only with new versions.
  • Original gasket is supplied only until factory stocks are exhausted; new MOQ H 1. Retained 2012 HS intake sheet C lists gasket 4226 129 0902. That later number does not silently replace either historical number or establish an unprovided supersession chain.
  • Historical TI 02/1995 guidance only. Factory availability and performance claims are historical, not current stock or measured results. MOQ means order quantity, not installed quantity. No unlisted-model applicability inferred. No hardware operation was performed.

Source: TI 2/1995, p. 2 · TI 2/1995, p. 3 — HS 72 / 74 / 76: enlarged inlet gasket window.

Part numbers (2)
  • 4226 129 0900 — Inlet gasket, 16 mm windoworiginal; stocks only · HS 72 / 74 / 76: enlarged inlet gasket window
  • 4226 129 0901 — Inlet gasket, 19 mm windownew; permitted on older machines · HS 72 / 74 / 76: enlarged inlet gasket window

Service note · HS 72 / HS 74 / HS 76

HS 72 / 74 / 76: spacer-flange retrofit needs matching hardware

19 mm cylinder-side opening; M5 x 56 screws and plugs, plus M5 x 25 screws and A 5.3 washers.

X 30 314 341 — Printed introduction of the uprated HS 72/74/76 engine; not a universal series or successor cutoff.

  • New spacer flange has a 19 mm (0.75 in) cylinder-side opening. When fitting it to older machines, check the filter base / carburetor / flange / cylinder assembly: M5 x 56 screws and plugs 4133 122 6900 MUST be used. Mount flange to cylinder with M5 x 25 screws and A 5.3 washers. The cylinder’s 10 Nm torque is NOT assigned here to the flange screws; no flange torque or full order numbers for those M5 x 25 screws/washers are supplied by this TI.
  • Page 2 illustration 363TI001 keys: 1 = M5 x 56 screws, 2 = plugs, 3 = M5 x 25 screws, 4 = A 5.3 washers. These are NOT page 3 summary keys, where 3 = flange, 4 = M5 x 56 screws, 5 = M5 nuts and 6 = plugs. Keep diagram and table numbering separate.
  • Original complete spacer flange 4133 120 2202 (including table items 3–6) is no longer factory-available; its new column is a dash, not a new complete assembly number. New separate flange is 4133 121 1602, MOQ H 1; old separate-flange entry is -*- and supplies no original order number. Unchanged companion numbers: 9007 319 1121 screws (2x), 9210 261 0700 M5 nuts (2x), and 4133 122 6900 plugs (2x). Do not treat the new separate flange as automatically including all former assembly contents.
  • Source summary calls 9007 319 1121 “Spline screw IS-M5 x 56”; retained 2012 intake sheet C calls it “Hexagon head screw M5x56”. TI specifies TWO plugs, while that IPL lists quantity ONE. Both discrepancies remain explicit; the IPL is navigation context, not permission to overwrite the TI’s screw description or installed count. Source supplies no resolution.
  • Historical TI 02/1995 guidance only. Factory availability and performance claims are historical, not current stock or measured results. MOQ means order quantity, not installed quantity. No unlisted-model applicability inferred. No hardware operation was performed.

Source: TI 2/1995, p. 2 · TI 2/1995, p. 3 — HS 72 / 74 / 76: spacer-flange retrofit needs matching hardware.

Part numbers (5)
  • 4133 120 2202 — Complete spacer flangeoriginal; includes table items3–6; unavailable · HS 72 / 74 / 76: spacer-flange retrofit needs matching hardware
  • 4133 121 1602 — Separate spacer flangenew; 19 mm opening · HS 72 / 74 / 76: spacer-flange retrofit needs matching hardware
  • 9007 319 1121 — M5 x56 screw; source says IS splineunchanged; two fitted · HS 72 / 74 / 76: spacer-flange retrofit needs matching hardware
  • 9210 261 0700 — Hexagon nut M5unchanged; two fitted · HS 72 / 74 / 76: spacer-flange retrofit needs matching hardware
  • 4133 122 6900 — Plugunchanged; two per TI · HS 72 / 74 / 76: spacer-flange retrofit needs matching hardware

Service note · HS 72 / HS 74 / HS 76 / HS 75 / HS 80 / HS 85

HS 72–85: unchanged tank and hose-kit numbers, changed grommet

Both assemblies receive 0000 989 0516; introduction in progress.

  • Fuel tank 4226 350 0405 and fuel hose kit 4226 007 1001 retain their numbers; each now includes grommet 0000 989 0516 instead of 4221 353 9201. Only modified tank/kit versions available from factory. Original grommet remains a spare for OTHER MODELS, not proof of continued fitment here.
  • Introduction is IN PROGRESS; no machine-number threshold is printed for this change.
  • Historical TI04/1997 evidence for HS 72, HS 74, HS 76, HS 75, HS 80 and HS 85, type 4226; the named blade length/carburetor/version remains a restriction, not every variant on every model. Factory-supply remarks describe 1997, not current availability. No hardware operation was performed.

Source: TI 4/1997, p. 1 · TI 4/1997, p. 5 — HS 72–85: unchanged tank and hose-kit numbers, changed grommet.

Part numbers (4)
  • 4226 350 0405 — Fuel tank, unchanged assembly numberHistorical listed item · TI04/1997 exact named HS models and version restrictions
  • 4226 007 1001 — Fuel hose kit, unchanged assembly numberHistorical listed item · TI04/1997 exact named HS models and version restrictions
  • 4221 353 9201 — Original grommetoriginal version · TI04/1997 exact named HS models and version restrictions
  • 0000 989 0516 — New grommetnew version · TI04/1997 exact named HS models and version restrictions

Service note · HS 72 / HS 74 / HS 76 / HS 75 / HS 80 / HS 85

HS 72–85: debris prefilter standardized at X 34 573 587

4226 141 0300 changes to 4226 141 0301.

X 34 573 587 — Prefilter change only.

  • Debris filter 4226 141 0300 → 4226 141 0301 standardizes inventories. Original no longer available from factory. Figure 366TI016 KN shows the filter form; no unprinted dimensions or other-model compatibility inferred.
  • Historical TI04/1997 evidence for HS 72, HS 74, HS 76, HS 75, HS 80 and HS 85, type 4226; the named blade length/carburetor/version remains a restriction, not every variant on every model. Factory-supply remarks describe 1997, not current availability. No hardware operation was performed.

Source: TI 4/1997, p. 1 · TI 4/1997, p. 5 — HS 72–85: debris prefilter standardized at X 34 573 587.

Part numbers (2)
  • 4226 141 0300 — Original debris filteroriginal version · TI04/1997 exact named HS models and version restrictions
  • 4226 141 0301 — New debris filternew version · TI04/1997 exact named HS models and version restrictions

Service note · HS 72 / HS 74 / HS 76 / HS 75 / HS 80 / HS 85

HS 72–85: cap filter added without changing cap number

Filter 0000 358 1810 introduced at X 32 106 939.

X 32 106 939 — Item 5 cap filter only.

  • Fuel filler cap 4226 350 0501 retains its number and now includes filter 0000 358 1810 (table item 5). Original filter column is a dash: new included component, not an old filter number. Only modified cap supplied from factory.
  • Figure 366TI017 KN retains the cap-component order as illustrated; unnumbered rings/internals are not assigned invented part numbers. Cap filter cutoff is NOT the pick-up-body cutoff.
  • Historical TI04/1997 evidence for HS 72, HS 74, HS 76, HS 75, HS 80 and HS 85, type 4226; the named blade length/carburetor/version remains a restriction, not every variant on every model. Factory-supply remarks describe 1997, not current availability. No hardware operation was performed.

Source: TI 4/1997, p. 1 · TI 4/1997, p. 6 — HS 72–85: cap filter added without changing cap number.

Part numbers (2)
  • 4226 350 0501 — Fuel filler cap, unchanged numberHistorical listed item · TI04/1997 exact named HS models and version restrictions
  • 0000 358 1810 — New included filter, item 5Historical listed item · TI04/1997 exact named HS models and version restrictions

Service note · HS 72 / HS 74 / HS 76 / HS 75 / HS 80 / HS 85

HS 72–85: pick-up body and unchanged 4226 007 1002 assembly

Pick-up-body cutoff X 36 287 313 differs from cap filter.

X 36 287 313 — Item 2 pick-up body only, not gasket/kit-wide.

  • Table labels 4226 007 1002 as “Fuel filler cap assembly”, including item 2 PICK-UP BODY and item 3 CYLINDER/SPACER-FLANGE GASKET. This unusual source label/content grouping is preserved, not corrected into a cap-only kit or proof the gasket fits inside the cap. Assembly number stays unchanged; only modified version supplied.
  • Pick-up body 4226 350 3500 → 0000 350 3503. Figure 366TI015 KN labels 1 old, 2 new. Old pick-up body supplied only while factory stocks last. X 36 287 313 applies to item 2, not the gasket or whole assembly. Other changes are described as in progress.
  • Historical TI04/1997 evidence for HS 72, HS 74, HS 76, HS 75, HS 80 and HS 85, type 4226; the named blade length/carburetor/version remains a restriction, not every variant on every model. Factory-supply remarks describe 1997, not current availability. No hardware operation was performed.

Source: TI 4/1997, p. 1 · TI 4/1997, p. 6 — HS 72–85: pick-up body and unchanged 4226 007 1002 assembly.

Part numbers (5)
  • 4226 007 1002 — Assembly retaining the source label and unchanged numberHistorical listed item · TI04/1997 exact named HS models and version restrictions
  • 4226 350 3500 — Original pick-up bodyoriginal version · TI04/1997 exact named HS models and version restrictions
  • 0000 350 3503 — New pick-up bodynew version · TI04/1997 exact named HS models and version restrictions
  • 4226 129 0901 — Original included cylinder/spacer-flange gasketoriginal version · TI04/1997 exact named HS models and version restrictions
  • 4226 129 0902 — New included cylinder/spacer-flange gasketnew version · TI04/1997 exact named HS models and version restrictions

Service note · HS 72 / HS 74 / HS 76 / HS 75 / HS 80 / HS 85

HS 72–85: cylinder-to-spacer-flange gasket replacement

4226 129 0901 → 4226 129 0902; no independent serial cutoff.

  • The prose locates this gasket BETWEEN THE CYLINDER AND SPACER FLANGE. Original 4226 129 0901 replaced by 4226 129 0902; original no longer available from factory (remark 3). Introduction in progress, with no gasket-specific serial.
  • The table includes this gasket in unchanged assembly 4226 007 1002 labeled “Fuel filler cap assembly”; retain that label/content anomaly separately from the explicit cylinder location. Do not apply cap-filter or pick-up-body serials to the gasket.
  • Historical TI04/1997 evidence for HS 72, HS 74, HS 76, HS 75, HS 80 and HS 85, type 4226; the named blade length/carburetor/version remains a restriction, not every variant on every model. Factory-supply remarks describe 1997, not current availability. No hardware operation was performed.

Source: TI 4/1997, p. 1 · TI 4/1997, p. 6 — HS 72–85: cylinder-to-spacer-flange gasket replacement.

Part numbers (3)
  • 4226 129 0901 — Original cylinder/spacer-flange gasketoriginal version · TI04/1997 exact named HS models and version restrictions
  • 4226 129 0902 — New cylinder/spacer-flange gasketnew version · TI04/1997 exact named HS models and version restrictions
  • 4226 007 1002 — Table assembly with unusual fuel-filler-cap labelHistorical listed item · TI04/1997 exact named HS models and version restrictions

Wrong number or missing part for the HS 72, HS 74, HS 76? Report a correction →