Stihl 4226 · Section J · 9 of 10 · 33 parts
Control handle HS 74
Fits HS 74.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (33)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 2 | 4226 160 2501 | Brake cable | 1 |
| 3 | 4226 790 3300 | AV carrier | 1 |
| 4 | 4226 791 7200 | Sleeve | 2 |
| 5 | 4226 791 2805 | Annular buffer | 2 |
| 6 | 4226 791 9700 | Washer | 2 |
| 7 | 9022 341 1010 | Spline screw IS-M5x18 | 2 |
| 8 | 4226 791 7300 | Plug | 2 |
| 9 | 4226 791 0606 | Handle molding, left | 1 |
| 10 | 4226 162 5000 | Lever | 1 |
| 11 | 4226 182 3700 | Connector tag | 2 |
| 12 | 4226 182 1700 | Slide control | 1 |
| 13 | 4226 182 3600 | Contact spring | 1 |
| 14 | 9093 021 1760 | Self-tapping screw 2.9x9.5 | 1 |
| 15 | 0000 998 0806 | Torsion spring | 1 |
| 16 | 4226 440 1101 | Short circuit wire 435 mm / 17.1'' | 2 |
| 17 | 0751 030 8953 NLA | Terminal socket 4.8-1 no longer available from factory | 4 |
| 18 | 0751 030 8470 | Grommet no longer available from factory | 4 |
| 19 | 4226 182 1000 | Throttle trigger | 1 |
| 20 | 0000 998 1003 | Torsion spring | 1 |
| 21 | 4226 182 0800 | Lockout lever | 1 |
| 22 | 4226 180 1101 | Throttle cable | 1 |
| 23 | 4226 792 7100 | Blocking lever | 1 |
| 24 | 0000 997 0724 | Compression spring | 1 |
| 25 | 4226 792 7300 | Safety slide | 1 |
| 26 | 9645 945 3902 | O-ring 44x3 | 1 |
| 27 | 4226 791 0602 | Handle molding, right | 1 |
| 28 | 9074 478 3075 | Pan head self-tapping screw IS-P4x19 Fitment / change note → | 4 |
| 29 | 4226 792 9102 | Hand guard | 1 |
| 30 | 4226 791 1700 | Handlebar | 1 |
| 31 | 4226 792 9300 | Rubber buffer | 2 |
| 32 | 9074 478 4135 | Pan head self-tapping screw IS-P5x20 | 1 |
| 33 | 9022 313 0680 | Spline screw IS-M4x16 | 4 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 0751 010 1110 | Lead 10 m / 33' not illustratedoption | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · HS 72 / HS 74
HS 72 / 74: Plastoform screw replaces handle-molding self-tapper
This section excludes HS 76 despite the broader bulletin heading.
- IS-P4 x 19 Plastoform spline screw 9074 478 3075 replaces IS-BZ4 x 19 self-tapping screw 9074 478 3065 on HS 72/74 handle moldings ONLY. Old screw remains available for OTHER MODELS. Introduction IN PROGRESS; no torque or HS 76 applicability.
- Historical TI 25/1994 guidance only. No successor or unlisted model applicability inferred. Factory supply and warranty statements are historical, not current availability or entitlement. MOQ columns are order quantities, not fitting quantities. No physical interchange test was performed.
Source: TI 25/1994, p. 4 — HS 72 / 74: Plastoform screw replaces handle-molding self-tapper.
Part numbers (2)
- 9074 478 3065 — IS-BZ4 x19 screwold; other models still supplied · HS 72 / 74: Plastoform screw replaces handle-molding self-tapper
- 9074 478 3075 — IS-P4 x19 Plastoform screwnew · HS 72 / 74: Plastoform screw replaces handle-molding self-tapper
Wrong number or missing part for the HS 74? Report a correction →