← HS 72, HS 74, HS 76 · HS 75, HS 80, HS 85

Stihl 4226 · Section H · 8 of 10 · 27 parts

Control handle HS 72

Fits HS 72.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
10111213141516171819220212223242526273456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (27)

PosPart numberDescriptionQty
2 4226 160 2500 Brake cable 1
3 4226 791 2805 Annular buffer 2
4 4226 791 9700 Washer 2
5 9022 341 1010 Spline screw IS-M5x18 2
6 4226 791 7300 Plug 2
7 4226 790 0600 Handle molding, left 1
8 4226 791 7200 Sleeve 2
9 4226 162 5000 Lever 1
10 4226 182 3700 Connector tag 2
11 4226 182 1700 Slide control 1
12 4226 182 3600 Contact spring 1
13 9093 021 1760 Self-tapping screw 2.9x9.5 1
14 0000 998 0806 Torsion spring 1
15 4226 440 1100 Short circuit wire 2
16 0751 030 8953 NLA Terminal socket 4.8-1 no longer available from factory 4
17 0751 030 8470 Grommet no longer available from factory 4
18 4226 182 1000 Throttle trigger 1
19 0000 998 1003 Torsion spring 1
20 4226 182 0800 Lockout lever 1
21 4226 180 1100 Throttle cable 1
22 4226 790 0601 Handle molding, right 1
23 9074 478 3075 Pan head self-tapping screw IS-P4x19 Fitment / change note → 4
24 4226 792 9102 Hand guard 1
25 4226 791 1700 Handlebar 1
26 4226 792 9300 Rubber buffer 2
27 9022 313 0680 Spline screw IS-M4x16 4
Not numbered on the diagram — assemblies, kits and options
— 0751 010 1110 Lead 10 m / 33' not illustratedoption 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · HS 72 / HS 74

HS 72 / 74: Plastoform screw replaces handle-molding self-tapper

This section excludes HS 76 despite the broader bulletin heading.

  • IS-P4 x 19 Plastoform spline screw 9074 478 3075 replaces IS-BZ4 x 19 self-tapping screw 9074 478 3065 on HS 72/74 handle moldings ONLY. Old screw remains available for OTHER MODELS. Introduction IN PROGRESS; no torque or HS 76 applicability.
  • Historical TI 25/1994 guidance only. No successor or unlisted model applicability inferred. Factory supply and warranty statements are historical, not current availability or entitlement. MOQ columns are order quantities, not fitting quantities. No physical interchange test was performed.

Source: TI 25/1994, p. 4 — HS 72 / 74: Plastoform screw replaces handle-molding self-tapper.

Part numbers (2)
  • 9074 478 3065 — IS-BZ4 x19 screwold; other models still supplied · HS 72 / 74: Plastoform screw replaces handle-molding self-tapper
  • 9074 478 3075 — IS-P4 x19 Plastoform screwnew · HS 72 / 74: Plastoform screw replaces handle-molding self-tapper

Wrong number or missing part for the HS 72? Report a correction →