Stihl 4226 · Section G · 7 of 17 · 39 parts
Gear housing
Fits HS 75, HS 80, HS 85.
Historical fitment & changes (4) — includes parts and conditions not shown on this drawing.
Parts (39)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4226 160 2901 | Clutch drum Fitment / change note → | 1 |
| 2 | 4226 640 0502 | Gear housing | 1 |
| 3 | 9513 003 0912 | Needle cage 8x12x8 Fitment / change note → | 1 |
| 4 | 9503 003 5382 | Grooved ball bearing 6003-2RS Fitment / change note → | 1 |
| 5 | 9456 621 3860 | Circlip 35x1.5 Fitment / change note → | 1 |
| 6 | 9381 003 2070 | Cylindrical pin 4x12 Fitment / change note → | 2 |
| 7 | 9371 470 2580 | Cylindrical pin 5x14 | 2 |
| 8 | 9455 621 1670 | Circlip 16x1 Fitment / change note → | 1 |
| 9 | 4226 642 9800 | Eccentric bush | 1 |
| 10 | 9022 341 1050 | Spline screw IS-M5x25 | 1 |
| 11 | 4226 162 5001 | Lever | 1 |
| 12 | 9381 651 1701 | Cylindrical pin 3x16 | 1 |
| 13 | 4226 162 5400 | Brake band | 1 |
| 14 | 4226 162 8900 | Washer | 2 |
| 15 | 0000 997 1600 | Compression spring | 1 |
| 16 | 9022 313 0680 | Spline screw IS-M4x16 | 2 |
| 17 | 4230 642 4800 | Thrust plate Fitment / change note → | 2 |
| 18 | 4226 642 6501 | Connecting rod Fitment / change note → | 2 |
| 19 | 4226 640 7503 | Spur gear | 1 |
| 20 | 9517 003 5350 | Cylindrical roller 8x28 | 1 |
| 21 | 4226 649 0301 | Gasket | 1 |
| 22 | 4226 649 0302 | Gasket Fitment / change note → | 1 |
| 23 | 4226 640 5850 | Gearbox cover Fitment / change note → | 1 |
| 24 | 4226 641 6500 | Screw plug Fitment / change note → | 1 |
| 25 | 9022 313 0680 | Spline screw IS-M4x16 | 6 |
| 26 | 9022 341 0980 | Spline screw IS-M5x16 | 3 |
| 27 | 9022 313 0610 | Spline screw IS-M4x6 | 1 |
| 28 | 4226 641 7000 | Bracket | 1 |
| 41 | 4226 642 9700 | Bushing Fitment / change note → | 1 |
| 42 | 9503 003 5290 | Grooved ball bearing 6002-2RS Fitment / change note → | 1 |
| 43 | 9456 621 3600 | Circlip 32x1.2 Fitment / change note → | 1 |
| 44 | 9371 470 2580 | Cylindrical pin 5x14 | 2 |
| 45 | 4226 160 2900 | Clutch drum Fitment / change note → | 1 |
| 46 | 4226 640 7500 | Spur gear Fitment / change note → | 1 |
| 47 | 4230 642 6501 | Connecting rod | 2 |
| 48 | 9455 621 1380 | Circlip 14x1 Fitment / change note → | 1 |
| 49 | 4226 649 0300 | Gasket Fitment / change note → | 1 |
| 50 | 4226 640 5800 | Gearbox cover Fitment / change note → | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 0781 120 1109 | Gear lubricant 80 g not illustratedoption | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · HS 75 / HS 80 / HS 85
HS 75/HS 80/HS 85: shared component tightening torques
Seventeen shared values; ambiguous crankcase row and fastener-specific distinctions retained.
- All values Nm. IS-M5x25 crankcase 9.5; second IS-M5x25 row prints “Crankcase” and “Crankcase spacer flange/cylinder”, with 5.5 aligned to the latter. Ambiguous two-line label retained, not a wholesale change of crankcase torque to 5.5. IS-DG5x24 cylinder/crankcase 9.5.
- IS-M4x16 brake band/gear housing 3.5 and gearbox cover/gear housing 3.5. IS-M5x16 muffler/cylinder 9.5; air cowling/gear housing 5.5; gear housing/crankcase 5.5; starter cover/crankcase 5.5; muffler/crankcase 9.5.
- M8 starter carrier 20.0 (no fastener designation supplied); M8 clutch nut 21.0. IS-M4x20 ignition module/cylinder 4.5; plastoform IS-P5.5x12 rope rotor in starter cover 3.5. IS-M5x16 cutting blade 9.5; IS-M5x25 eccentric lever/gear housing 5.5; M14x1.25 spark plug 20.0.
- The other six table values are model-specific blade-guide, rubber-buffer and handle rows, recorded separately. No lubricated-thread condition or tightening sequence specified; shared thread size does not establish shared torque. No component/fastener part number invented.
- Historical HS 75, HS 80 and HS 85 type 4226 evidence, restricted to the models named in this note. Replacement of HS 72/74/76 is not parts interchangeability. No serial cutoff or calendar introduction date is supplied. No hardware operation was performed.
Source: TI 17/1996, p. 1 · TI 17/1996, p. 7 — shared component tightening torques.
No additional parts-table entry added.
Service note · HS 72 / HS 74 / HS 76 / HS 75 / HS 80 / HS 85
HS 72–85: matched gearbox drive changes from 7.1 to 5.6
57/8 teeth becomes 56/10; no mixed old/new gearbox parts.
X 36 360 021 — Gearbox change only; not all blade/fuel-system modifications.
- From X 36 360 021 the printed gear ratio changes from 7.1 to 5.6 to increase blade speed. Original and new gearbox parts must NOT be used together in ANY combination. This is not permission to retrofit an individual new gear into the old housing.
- Figures 366TI005/008/006/007/010/009/011/012 KN identify 1 as old and 2 as new: changed housing, bushing versus needle sleeve, cover and gasket outlines, spur gear, clutch drum, connecting rod and thrust plate. No dimensions are inferred from drawing scale.
- Spur gear: old Z=57, new Z=56. Clutch drum: old Z=8, new Z=10. Table lists TWO connecting rods and TWO thrust plates; rod original prefix is 4206, not silently corrected to 4226.
- Original drum, gear, rods and circlip remain spares for older models (remark 1). Original thrust plate supplied only while factory stocks last (remark 2).
- Historical TI04/1997 evidence for HS 72, HS 74, HS 76, HS 75, HS 80 and HS 85, type 4226; the named blade length/carburetor/version remains a restriction, not every variant on every model. Factory-supply remarks describe 1997, not current availability. No hardware operation was performed.
Source: TI 4/1997, p. 1 · TI 4/1997, p. 2 · TI 4/1997, p. 3 — HS 72–85: matched gearbox drive changes from 7.1 to 5.6.
Part numbers (10)
- 4226 160 2900 — Original clutch drumoriginal version · TI04/1997 exact named HS models and version restrictions
- 4226 160 2901 — New clutch drumnew version · TI04/1997 exact named HS models and version restrictions
- 4226 640 7500 — Original spur gearoriginal version · TI04/1997 exact named HS models and version restrictions
- 4226 640 7504 — New spur gearnew version · TI04/1997 exact named HS models and version restrictions
- 4206 642 6500 — Original connecting rod (2x)original version · TI04/1997 exact named HS models and version restrictions
- 4226 642 6501 — New connecting rod (2x)new version · TI04/1997 exact named HS models and version restrictions
- 4211 642 4800 — Original thrust plate (2x)original version · TI04/1997 exact named HS models and version restrictions
- 4230 642 4800 — New thrust plate (2x)new version · TI04/1997 exact named HS models and version restrictions
- 9455 621 1380 — Original circlip, item 11original version · TI04/1997 exact named HS models and version restrictions
- 9455 621 1670 — New circlip, item 11new version · TI04/1997 exact named HS models and version restrictions
Service note · HS 72 / HS 74 / HS 76 / HS 75 / HS 80 / HS 85
HS 72–85: housing bearing and needle-sleeve contents
Housing includes items 2–6; new-only sleeve and roll pin retained.
X 36 360 021 — Matched gearbox housing change.
- From X 36 360 021 the printed gear ratio changes from 7.1 to 5.6 to increase blade speed. Original and new gearbox parts must NOT be used together in ANY combination. This is not permission to retrofit an individual new gear into the old housing.
- Figures 366TI005/008/006/007/010/009/011/012 KN identify 1 as old and 2 as new: changed housing, bushing versus needle sleeve, cover and gasket outlines, spur gear, clutch drum, connecting rod and thrust plate. No dimensions are inferred from drawing scale.
- Housing 4226 640 0500 → 4226 640 0501 includes table items 2–6: changed ball bearing and circlip; original bushing has no new counterpart; new needle sleeve and 6 x 12 roll pin have no original counterparts. A dash is not a zero quantity or a missing transcription.
- Original housing, bearing, bushing and item-4 circlip remain spares for older models. This does not relax the no-mixing rule. No later housing number is declared equivalent.
- Historical TI04/1997 evidence for HS 72, HS 74, HS 76, HS 75, HS 80 and HS 85, type 4226; the named blade length/carburetor/version remains a restriction, not every variant on every model. Factory-supply remarks describe 1997, not current availability. No hardware operation was performed.
Source: TI 4/1997, p. 1 · TI 4/1997, p. 2 · TI 4/1997, p. 3 — HS 72–85: housing bearing and needle-sleeve contents.
Part numbers (9)
- 4226 640 0500 — Original gearbox housingoriginal version · TI04/1997 exact named HS models and version restrictions
- 4226 640 0501 — New gearbox housingnew version · TI04/1997 exact named HS models and version restrictions
- 9503 003 5290 — Original ball bearingoriginal version · TI04/1997 exact named HS models and version restrictions
- 9503 003 5382 — New ball bearingnew version · TI04/1997 exact named HS models and version restrictions
- 4226 642 9700 — Original bushing, item 3Historical listed item · TI04/1997 exact named HS models and version restrictions
- 9456 621 3600 — Original circlip, item 4original version · TI04/1997 exact named HS models and version restrictions
- 9456 621 3860 — New circlip, item 4new version · TI04/1997 exact named HS models and version restrictions
- 9513 003 0912 — New-only needle sleeve, item 5Historical listed item · TI04/1997 exact named HS models and version restrictions
- 9381 003 2070 — New-only roll pin 6 x 12, item 6Historical listed item · TI04/1997 exact named HS models and version restrictions
Service note · HS 72 / HS 74 / HS 76 / HS 75 / HS 80 / HS 85
HS 72–85: cover includes its matching gasket
Old and new covers remain separate matched sets.
X 36 360 021 — Matched cover/gasket change.
- From X 36 360 021 the printed gear ratio changes from 7.1 to 5.6 to increase blade speed. Original and new gearbox parts must NOT be used together in ANY combination. This is not permission to retrofit an individual new gear into the old housing.
- Figures 366TI005/008/006/007/010/009/011/012 KN identify 1 as old and 2 as new: changed housing, bushing versus needle sleeve, cover and gasket outlines, spur gear, clutch drum, connecting rod and thrust plate. No dimensions are inferred from drawing scale.
- Cover 4226 640 5800 → 4226 640 5850 includes items 13–15: changed screw plug, original-only bushing and new-only needle sleeve. Original cover/bushing remain spares for older models; original screw plug supplied while stocks last.
- Gasket 4226 649 0300 → 4226 649 0302: each version will be supplied with its respective housing cover (remark 3). Do not mix gaskets/covers or interpret the two cover assemblies as interchangeable.
- Historical TI04/1997 evidence for HS 72, HS 74, HS 76, HS 75, HS 80 and HS 85, type 4226; the named blade length/carburetor/version remains a restriction, not every variant on every model. Factory-supply remarks describe 1997, not current availability. No hardware operation was performed.
Source: TI 4/1997, p. 1 · TI 4/1997, p. 2 · TI 4/1997, p. 3 — HS 72–85: cover includes its matching gasket.
Part numbers (8)
- 4226 640 5800 — Original gearbox housing coveroriginal version · TI04/1997 exact named HS models and version restrictions
- 4226 640 5850 — New gearbox housing covernew version · TI04/1997 exact named HS models and version restrictions
- 4117 713 6501 — Original screw plugoriginal version · TI04/1997 exact named HS models and version restrictions
- 4226 641 6500 — New screw plugnew version · TI04/1997 exact named HS models and version restrictions
- 4226 642 9700 — Original cover bushing, item 14Historical listed item · TI04/1997 exact named HS models and version restrictions
- 9513 003 0912 — New cover needle sleeve, item 15Historical listed item · TI04/1997 exact named HS models and version restrictions
- 4226 649 0300 — Original gasketoriginal version · TI04/1997 exact named HS models and version restrictions
- 4226 649 0302 — New gasketnew version · TI04/1997 exact named HS models and version restrictions
Wrong number or missing part for the HS 75, HS 80, HS 85? Report a correction →