← HS 72, HS 74, HS 76 · HS 75, HS 80, HS 85

Stihl 4226 · Section H · 8 of 17 · 26 parts

Cutter bar HS 75, 80

Fits HS 75.

Parts diagrams →

Historical fitment & changes (5) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111213131415151516161616171922021223344567899
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (26)

PosPart numberDescriptionQty
1 4226 740 6500 NLA Guide 500 mm / 20" Fitment / change note → 1
2 4226 704 3500 NLA Guide 500 mm / 20" Fitment / change note → 1
3 4226 710 6050 NLA Blade 500 mm / 20" 1
4 4226 713 6600 Pin Fitment / change note → 2
5 4230 713 1715 Flat spring Fitment / change note → 1
6 4226 790 9202 NLA Blade guard 500 mm / 20" Fitment / change note → 1
7 4226 740 6501 Guide 600 mm / 24" Fitment / change note → 1
8 4226 704 3501 Guide 600 mm / 24" Fitment / change note → 1
9 4226 710 6051 Blade 600 mm / 24" 1
10 4226 790 9200 Blade guard 600 mm / 24" Fitment / change note → 1
11 4226 740 6502 NLA Guide 750 mm / 30" Fitment / change note → 1
12 4226 704 3502 NLA Guide 750 mm / 30" Fitment / change note → 1
13 4226 710 6061 NLA Blade 750 mm / 30" 1
14 4226 790 9203 NLA Blade guard 750 mm / 30" Fitment / change note → 1
15 4226 648 6701 Slider Fitment / change note →
16 9220 263 0702 Hexagon nut M5 Fitment / change note →
17 4226 792 9700 Cutter guard Fitment / change note → 1
19 4226 790 9800 NLA Guide guard Fitment / change note → option 1
20 4226 792 9001 NLA Guide guard Fitment / change note → option 1
21 not sold separately Slider option
22 9220 260 0700 Hexagon nut M5 option
Not numbered on the diagram — assemblies, kits and options
— 4226 710 5932 NLA Cutter bar 500 mm / 20" Fitment / change note → 1
— 4226 710 5903 Cutter bar 600 mm / 24" Fitment / change note → 1
— 4226 710 5942 NLA Cutter bar 750 mm / 30" Fitment / change note → 1
— 4226 007 1003 NLA Guide guard kit Fitment / change note → option 1
— 4226 007 1005 Slider kit option 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · HS 75 / HS 80

HS 75/HS 80: blade-guide and handle torques

Three model-restricted values; do not substitute the HS85 screws or torques.

  • HS75 and HS80 ONLY, Nm: IS-M5x20 blade guide/gear housing 9.5; IS-M5x18 rubber buffer/handle moulding 3.5; plastoform IS-P4x19 handle moulding 2.0.
  • HS85 has separately listed screw lengths, mounting components and handle torque. These HS75/80 values do not apply merely because the common IPL family metadata includes HS85.
  • Historical HS 75, HS 80 and HS 85 type 4226 evidence, restricted to the models named in this note. Replacement of HS 72/74/76 is not parts interchangeability. No serial cutoff or calendar introduction date is supplied. No hardware operation was performed.

Source: TI 17/1996, p. 1 · TI 17/1996, p. 7 — HS75/80 blade-guide and handle torques.

No additional parts-table entry added.

Conditional replacement · HS 75 / HS 80

HS 75 / HS 80: 420 DS to 500 (20 in) DS cutter bar

Historical component changes with a cutter-bar-only cutoff; later catalog serial wording differs.

1 45 521 844 — TI42 page3: HS75/HS80 cutter-bar introduction from this serial; later catalog sheet J marker 1 45 512 843 conflicts, not an inferred complementary endpoint.

  • The 420 DS complete bar becomes 500 (20 in) DS; the table says each complete bar includes items 1–14, and each listed blade includes pin item 3. Separate previous/new rows and blank cells are preserved; a blank does not mean free interchange, zero quantity or a separately orderable new screw.
  • Section 1 introduces a special self-locking spline screw with a POLYAMIDE RING ON ITS SHANK and M5 hexagon nut with locking teeth. Drawing 366TI000 KN shows screw LEFT and nut RIGHT; the arrow identifies the ring. Claimed benefits: nut does not loosen in use, screw retained in blade, slider stays in place when nut removed. No separate new screw order number is printed; do not reuse an old screw number as the new fastener.
  • Page2 drawing 366TI025 KN is explicitly the 750 (30 in) DS bar, even though the table beneath is the 420/500 DS table. Visible callouts 2,5,6,7,11,12 identify blades, distinct guides, flat spring, hexagon nuts and sliders; drawing occurrences are not a complete quantity table for every length.
  • The old M5x16 screw quantity is 3x; old M5x20 screws are 2x, old guide item4 is 2x. Do not apply those old quantities to the new design. The old slider carries remark 2: remains available.
  • Page3 prints modification FROM serial 1 45 521 844 for the cutter bars. This is a model-conditioned component introduction, not a model-identification range and not the bump-guard or starter changeover.
  • Unresolved catalog comparison: the later SCS01-2012 JSON sheet J (doc1767) title contains 1 45 512 843 (42.1999), whereas TI42 page3 prints 1 45 521 844. These are NOT adjacent endpoints. Preserve both; do not silently swap 512/521, manufacture an old-side interval or select a winner. Sheets H/J associate matching complete-bar numbers but their later blade numbers differ; no blade supersession is inferred from the association.
  • TI42/1999 english/USA historical evidence for HS 75 and HS 80 only. Shared 2012 catalog membership does not extend this TI to HS 85, HS 72, HS 74 or HS 76. Factory-availability remarks describe the historical issue, not current stock. No verified physical interchange, universal retrofit, torque or operating procedure is inferred.

Source: TI 42/1999, p. 1 · TI 42/1999, p. 2 · TI 42/1999, p. 3 — 420 DS to 500 (20 in) DS cutter bar.

Part numbers (20)
  • 4226 710 5931 — Cutter bar 420 DSPrevious complete bar; remark 1: no longer factory-available · HS 75 / HS 80; TI42 420 DS to 500 (20 in) DS table only
  • 4226 710 5932 — Cutter bar 500 (20 in) DSNew complete bar; includes items 1–14 as printed · HS 75 / HS 80; TI42 420 DS to 500 (20 in) DS table only
  • 4226 710 6026 — Blade 420 DSItem 1 previous; remark 2: remains available · HS 75 / HS 80; TI42 420 DS to 500 (20 in) DS table only
  • 4226 710 6009 — Blade 500 (20 in) DSItem 2 new; includes pin item 3 · HS 75 / HS 80; TI42 420 DS to 500 (20 in) DS table only
  • 4226 713 6600 — PinItem 3 unchanged; included with both listed blade versions · HS 75 / HS 80; TI42 420 DS to 500 (20 in) DS table only
  • 4226 641 4602 — Guide 420 DSItem 4 previous, 2x; remark 2: remains available · HS 75 / HS 80; TI42 420 DS to 500 (20 in) DS table only
  • 4226 740 6500 — Guide 500 (20 in) DSItem 5 new · HS 75 / HS 80; TI42 420 DS to 500 (20 in) DS table only
  • 4226 704 3500 — Guide 500 (20 in) DSItem 6 new; distinct from item 5 · HS 75 / HS 80; TI42 420 DS to 500 (20 in) DS table only
  • 4226 713 1702 — Flat springItem 7 previous; remark 2: remains available · HS 75 / HS 80; TI42 420 DS to 500 (20 in) DS table only
  • 4230 713 1715 — Flat springItem 7 new · HS 75 / HS 80; TI42 420 DS to 500 (20 in) DS table only
  • 4226 792 9101 — Cutter guardItem 8 previous; remark 2: remains available · HS 75 / HS 80; TI42 420 DS to 500 (20 in) DS table only
  • 4226 792 9700 — Cutter guardItem 8 new · HS 75 / HS 80; TI42 420 DS to 500 (20 in) DS table only
  • 9022 341 0980 — Spline screw IS M5x16Item 9 previous, 3x; new column blank; remark 2: remains available · HS 75 / HS 80; TI42 420 DS to 500 (20 in) DS table only
  • 9220 260 0701 — Locknut M5Item 10 previous; new column blank; remark 2: remains available · HS 75 / HS 80; TI42 420 DS to 500 (20 in) DS table only
  • 9220 263 0702 — Hexagon nutItem 11 new; no quantity printed in this row · HS 75 / HS 80; TI42 420 DS to 500 (20 in) DS table only
  • 4226 648 6700 — SliderItem 12 previous; remark 2: remains available · HS 75 / HS 80; TI42 420 DS to 500 (20 in) DS table only
  • 4226 648 6701 — SliderItem 12 new; paired with previous slider · HS 75 / HS 80; TI42 420 DS to 500 (20 in) DS table only
  • 9022 371 1020 — Spline screw IS M5x20Item 13 previous, 2x; new column blank; remark 2: remains available · HS 75 / HS 80; TI42 420 DS to 500 (20 in) DS table only
  • 4226 790 9103 — Blade guardItem 14 previous; remark 2: remains available · HS 75 / HS 80; TI42 420 DS to 500 (20 in) DS table only
  • 4226 790 9202 — Blade guardItem 14 new · HS 75 / HS 80; TI42 420 DS to 500 (20 in) DS table only

Conditional replacement · HS 75 / HS 80

HS 75 / HS 80: 550 DS to 600 (24 in) DS cutter bar

Historical component changes with a cutter-bar-only cutoff; later catalog serial wording differs.

1 45 521 844 — TI42 page3: HS75/HS80 cutter-bar introduction from this serial; later catalog sheet J marker 1 45 512 843 conflicts, not an inferred complementary endpoint.

  • The 550 DS complete bar becomes 600 (24 in) DS; the table says each complete bar includes items 1–14, and each listed blade includes pin item 3. Separate previous/new rows and blank cells are preserved; a blank does not mean free interchange, zero quantity or a separately orderable new screw.
  • Section 1 introduces a special self-locking spline screw with a POLYAMIDE RING ON ITS SHANK and M5 hexagon nut with locking teeth. Drawing 366TI000 KN shows screw LEFT and nut RIGHT; the arrow identifies the ring. Claimed benefits: nut does not loosen in use, screw retained in blade, slider stays in place when nut removed. No separate new screw order number is printed; do not reuse an old screw number as the new fastener.
  • Page2 drawing 366TI025 KN is explicitly the 750 (30 in) DS bar, even though the table beneath is the 420/500 DS table. Visible callouts 2,5,6,7,11,12 identify blades, distinct guides, flat spring, hexagon nuts and sliders; drawing occurrences are not a complete quantity table for every length.
  • The old M5x16 screw quantity is 4x; old M5x20 screws are 2x, old guide item4 is 2x. Do not apply those old quantities to the new design. The old slider carries remark 2: remains available.
  • Page3 prints modification FROM serial 1 45 521 844 for the cutter bars. This is a model-conditioned component introduction, not a model-identification range and not the bump-guard or starter changeover.
  • Unresolved catalog comparison: the later SCS01-2012 JSON sheet J (doc1767) title contains 1 45 512 843 (42.1999), whereas TI42 page3 prints 1 45 521 844. These are NOT adjacent endpoints. Preserve both; do not silently swap 512/521, manufacture an old-side interval or select a winner. Sheets H/J associate matching complete-bar numbers but their later blade numbers differ; no blade supersession is inferred from the association.
  • TI42/1999 english/USA historical evidence for HS 75 and HS 80 only. Shared 2012 catalog membership does not extend this TI to HS 85, HS 72, HS 74 or HS 76. Factory-availability remarks describe the historical issue, not current stock. No verified physical interchange, universal retrofit, torque or operating procedure is inferred.

Source: TI 42/1999, p. 1 · TI 42/1999, p. 2 · TI 42/1999, p. 3 — 550 DS to 600 (24 in) DS cutter bar.

Part numbers (20)
  • 4226 710 5901 — Cutter bar 550 DSPrevious complete bar; remark 1: no longer factory-available · HS 75 / HS 80; TI42 550 DS to 600 (24 in) DS table only
  • 4226 710 5903 — Cutter bar 600 (24 in) DSNew complete bar; includes items 1–14 as printed · HS 75 / HS 80; TI42 550 DS to 600 (24 in) DS table only
  • 4226 710 6020 — Blade 550 DSItem 1 previous; remark 2: remains available · HS 75 / HS 80; TI42 550 DS to 600 (24 in) DS table only
  • 4226 710 6019 — Blade 600 (24 in) DSItem 2 new; includes pin item 3 · HS 75 / HS 80; TI42 550 DS to 600 (24 in) DS table only
  • 4226 713 6600 — PinItem 3 unchanged; included with both listed blade versions · HS 75 / HS 80; TI42 550 DS to 600 (24 in) DS table only
  • 4226 641 4600 — Guide 550 DSItem 4 previous, 2x; remark 2: remains available · HS 75 / HS 80; TI42 550 DS to 600 (24 in) DS table only
  • 4226 740 6501 — Guide 600 (24 in) DSItem 5 new · HS 75 / HS 80; TI42 550 DS to 600 (24 in) DS table only
  • 4226 704 3501 — Guide 600 (24 in) DSItem 6 new; distinct from item 5 · HS 75 / HS 80; TI42 550 DS to 600 (24 in) DS table only
  • 4226 713 1700 — Flat springItem 7 previous; remark 2: remains available · HS 75 / HS 80; TI42 550 DS to 600 (24 in) DS table only
  • 4230 713 1715 — Flat springItem 7 new · HS 75 / HS 80; TI42 550 DS to 600 (24 in) DS table only
  • 4226 792 9101 — Cutter guardItem 8 previous; remark 2: remains available · HS 75 / HS 80; TI42 550 DS to 600 (24 in) DS table only
  • 4226 792 9700 — Cutter guardItem 8 new · HS 75 / HS 80; TI42 550 DS to 600 (24 in) DS table only
  • 9022 341 0980 — Spline screw IS M5x16Item 9 previous, 4x; new column blank; remark 2: remains available · HS 75 / HS 80; TI42 550 DS to 600 (24 in) DS table only
  • 9220 260 0701 — Locknut M5Item 10 previous; new column blank; remark 2: remains available · HS 75 / HS 80; TI42 550 DS to 600 (24 in) DS table only
  • 9220 263 0702 — Hexagon nutItem 11 new; no quantity printed in this row · HS 75 / HS 80; TI42 550 DS to 600 (24 in) DS table only
  • 4226 648 6700 — SliderItem 12 previous; remark 2: remains available · HS 75 / HS 80; TI42 550 DS to 600 (24 in) DS table only
  • 4226 648 6701 — SliderItem 12 new; paired with previous slider · HS 75 / HS 80; TI42 550 DS to 600 (24 in) DS table only
  • 9022 371 1020 — Spline screw IS M5x20Item 13 previous, 2x; new column blank; remark 2: remains available · HS 75 / HS 80; TI42 550 DS to 600 (24 in) DS table only
  • 4226 790 9100 — Blade guardItem 14 previous; remark 2: remains available · HS 75 / HS 80; TI42 550 DS to 600 (24 in) DS table only
  • 4226 790 9200 — Blade guardItem 14 new · HS 75 / HS 80; TI42 550 DS to 600 (24 in) DS table only

Conditional replacement · HS 75 / HS 80

HS 75 / HS 80: 700 DS to 750 (30 in) DS cutter bar

Historical component changes with a cutter-bar-only cutoff; later catalog serial wording differs.

1 45 521 844 — TI42 page3: HS75/HS80 cutter-bar introduction from this serial; later catalog sheet J marker 1 45 512 843 conflicts, not an inferred complementary endpoint.

  • The 700 DS complete bar becomes 750 (30 in) DS; the table says each complete bar includes items 1–14, and each listed blade includes pin item 3. Separate previous/new rows and blank cells are preserved; a blank does not mean free interchange, zero quantity or a separately orderable new screw.
  • Section 1 introduces a special self-locking spline screw with a POLYAMIDE RING ON ITS SHANK and M5 hexagon nut with locking teeth. Drawing 366TI000 KN shows screw LEFT and nut RIGHT; the arrow identifies the ring. Claimed benefits: nut does not loosen in use, screw retained in blade, slider stays in place when nut removed. No separate new screw order number is printed; do not reuse an old screw number as the new fastener.
  • Page2 drawing 366TI025 KN is explicitly the 750 (30 in) DS bar, even though the table beneath is the 420/500 DS table. Visible callouts 2,5,6,7,11,12 identify blades, distinct guides, flat spring, hexagon nuts and sliders; drawing occurrences are not a complete quantity table for every length.
  • The old M5x16 screw quantity is 5x; old M5x20 screws are 2x, old guide item4 is 2x. Do not apply those old quantities to the new design. The 700/750 DS slider row12 has NO remark 2; do not copy the old-slider availability remark from the two shorter tables.
  • Page3 prints modification FROM serial 1 45 521 844 for the cutter bars. This is a model-conditioned component introduction, not a model-identification range and not the bump-guard or starter changeover.
  • Unresolved catalog comparison: the later SCS01-2012 JSON sheet J (doc1767) title contains 1 45 512 843 (42.1999), whereas TI42 page3 prints 1 45 521 844. These are NOT adjacent endpoints. Preserve both; do not silently swap 512/521, manufacture an old-side interval or select a winner. Sheets H/J associate matching complete-bar numbers but their later blade numbers differ; no blade supersession is inferred from the association.
  • TI42/1999 english/USA historical evidence for HS 75 and HS 80 only. Shared 2012 catalog membership does not extend this TI to HS 85, HS 72, HS 74 or HS 76. Factory-availability remarks describe the historical issue, not current stock. No verified physical interchange, universal retrofit, torque or operating procedure is inferred.

Source: TI 42/1999, p. 1 · TI 42/1999, p. 2 · TI 42/1999, p. 3 — 700 DS to 750 (30 in) DS cutter bar.

Part numbers (20)
  • 4226 710 5941 — Cutter bar 700 DSPrevious complete bar; remark 1: no longer factory-available · HS 75 / HS 80; TI42 700 DS to 750 (30 in) DS table only
  • 4226 710 5942 — Cutter bar 750 (30 in) DSNew complete bar; includes items 1–14 as printed · HS 75 / HS 80; TI42 700 DS to 750 (30 in) DS table only
  • 4226 710 6023 — Blade 700 DSItem 1 previous; remark 2: remains available · HS 75 / HS 80; TI42 700 DS to 750 (30 in) DS table only
  • 4226 710 6031 — Blade 750 (30 in) DSItem 2 new; includes pin item 3 · HS 75 / HS 80; TI42 700 DS to 750 (30 in) DS table only
  • 4226 713 6600 — PinItem 3 unchanged; included with both listed blade versions · HS 75 / HS 80; TI42 700 DS to 750 (30 in) DS table only
  • 4226 641 4601 — Guide 700 DSItem 4 previous, 2x; remark 2: remains available · HS 75 / HS 80; TI42 700 DS to 750 (30 in) DS table only
  • 4226 740 6502 — Guide 750 (30 in) DSItem 5 new · HS 75 / HS 80; TI42 700 DS to 750 (30 in) DS table only
  • 4226 704 3502 — Guide 750 (30 in) DSItem 6 new; distinct from item 5 · HS 75 / HS 80; TI42 700 DS to 750 (30 in) DS table only
  • 4226 713 1701 — Flat springItem 7 previous; remark 2: remains available · HS 75 / HS 80; TI42 700 DS to 750 (30 in) DS table only
  • 4230 713 1715 — Flat springItem 7 new · HS 75 / HS 80; TI42 700 DS to 750 (30 in) DS table only
  • 4226 792 9101 — Cutter guardItem 8 previous; remark 2: remains available · HS 75 / HS 80; TI42 700 DS to 750 (30 in) DS table only
  • 4226 792 9700 — Cutter guardItem 8 new · HS 75 / HS 80; TI42 700 DS to 750 (30 in) DS table only
  • 9022 341 0980 — Spline screw IS M5x16Item 9 previous, 5x; new column blank; remark 2: remains available · HS 75 / HS 80; TI42 700 DS to 750 (30 in) DS table only
  • 9220 260 0701 — Locknut M5Item 10 previous; new column blank; remark 2: remains available · HS 75 / HS 80; TI42 700 DS to 750 (30 in) DS table only
  • 9220 263 0702 — Hexagon nutItem 11 new; no quantity printed in this row · HS 75 / HS 80; TI42 700 DS to 750 (30 in) DS table only
  • 4226 648 6700 — SliderItem 12 previous; remark blank in 750 DS table · HS 75 / HS 80; TI42 700 DS to 750 (30 in) DS table only
  • 4226 648 6701 — SliderItem 12 new; remark blank in 750 DS table · HS 75 / HS 80; TI42 700 DS to 750 (30 in) DS table only
  • 9022 371 1020 — Spline screw IS M5x20Item 13 previous, 2x; new column blank; remark 2: remains available · HS 75 / HS 80; TI42 700 DS to 750 (30 in) DS table only
  • 4226 790 9104 — Blade guardItem 14 previous; remark 2: remains available · HS 75 / HS 80; TI42 700 DS to 750 (30 in) DS table only
  • 4226 790 9203 — Blade guardItem 14 new · HS 75 / HS 80; TI42 700 DS to 750 (30 in) DS table only

Service note · HS 75 / HS 80

HS 75 / HS 80: optional bump guard kit

Special accessory for snag-risk reduction and blade protection; introduction in progress.

  • Section2 says the kit will be available as a SPECIAL ACCESSORY to help reduce snagging risk and protect cutting blades. It is not standard equipment and no guarantee against damage is claimed.
  • Drawing366TI026 KN shows two studded/lapped guard members and two nuts; table item1 includes items2–4. No HS85 exclusion or single-guard version is stated here; do not import another bulletin’s HS85 instructions.
  • Introduction is IN PROGRESS; no serial cutoff is printed for this accessory. The cutter-bar cutoff must not be reused as an accessory fitment boundary. Later sheet H lists the same kit and component numbers; this association does not extend the TI to its shared HS85 product label.
  • TI42/1999 english/USA historical evidence for HS 75 and HS 80 only. Shared 2012 catalog membership does not extend this TI to HS 85, HS 72, HS 74 or HS 76. Factory-availability remarks describe the historical issue, not current stock. No verified physical interchange, universal retrofit, torque or operating procedure is inferred.

Source: TI 42/1999, p. 4 — optional bump guard kit.

Part numbers (4)
  • 4226 007 1003 — Bump guard kitItem1; includes items2–4 · HS 75 / HS 80; TI42 section2 special accessory only
  • 4226 790 9800 — Bump guardItem2; lower studded member in drawing · HS 75 / HS 80; TI42 section2 special accessory only
  • 4226 792 9001 — Bump guardItem3; upper member in drawing · HS 75 / HS 80; TI42 section2 special accessory only
  • 9220 263 0702 — Hexagon nut M5Item4; two depicted, no numeric quantity in table · HS 75 / HS 80; TI42 section2 special accessory only

Wrong number or missing part for the HS 75? Report a correction →