Stihl 4227 · Section H · 8 of 8 · 13 parts
Vacuum attachment
Fits BG 75.
Historical fitment & changes (3) — includes parts and conditions not shown on this drawing.
Parts (13)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4227 700 7100 | Hose clip | 1 |
| 2 | 4227 700 2300 | Screw plug | 1 |
| 3 | 4227 708 3501 | Suction tube | 1 |
| 4 | 4227 700 6900 | Elbow Fitment / change note → | 1 |
| 5 | 4227 700 7102 | Hose clip Fitment / change note → | 1 |
| 6 | 4227 701 5000 | Screw Fitment / change note → | 1 |
| 7 | 4229 708 9702 | Catcher bag | 1 |
| 8 | 4227 710 9003 | Harness | 1 |
| 9 | 4227 790 0350 | Handle Fitment / change note → | 1 |
| 10 | 9022 341 1080 | Spline screw IS-M5x35 Fitment / change note → | 2 |
| 11 | 9074 478 4425 | Pan head self-tapping screw IS-P6x19 | 1 |
| 12 | 0812 370 1000 | Screwdriver T27x120x70 | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4227 007 1000 | Vacuum attachment Fitment / change note → option | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · BG 75
BG 75: vacuum and gutter-cleaning kits
Two optional user accessories; no installation or cross-model compatibility inferred.
- Vacuum attachment kit 4227 007 1000 and gutter-cleaning kit 4227 007 1005 are special user accessories for BG 75. Current exact-model vacuum/fan sheets retain the same kit numbers. The TI provides no installation steps, package inventory or compatibility beyond BG 75.
- Historical BG 75 type 4227 evidence only; BG 72 replacement is not parts interchangeability. No serial cutoff or calendar introduction date is supplied. No hardware operation was performed.
Source: TI 16/1996, p. 1 · TI 16/1996, p. 4 — vacuum and gutter-cleaning kits.
Part numbers (2)
- 4227 007 1000 — Vacuum attachment kitTI16/1996 listed item · BG 75
- 4227 007 1005 — Gutter-cleaning kitTI16/1996 listed item · BG 75
Historical fitment · BG 72 / BG 75
BG 72 / BG 75 vacuum handle: longer screws and unchanged kit number
Handle 4227 791 0300 changes to 4227 790 0350; vacuum attachment 4227 007 1000 keeps its number.
- The handle change is linked to the shroud modification in section2. Longer screws secure the handle to the starter cover/crankcase. They are to be supplied with the handle for APPROXIMATELY TWO YEARS; this is a historical supply arrangement, not a current kit-content guarantee or an exact end date.
- The four-row summary keeps vacuum attachment 4227 007 1000 unchanged and says it includes items2–4. Handle 4227 791 0300 becomes 4227 790 0350 and includes item3. Item3 is TWO spline screws M5 x 35 x 22, 9022 341 1080, with no old number; item4 is TWO original M5 x 25 screws, 9022 341 1050, with no new number. Preserve the printed inclusion range and dashes; they do not prove the new kit contains both screw lengths.
- The drawing identifies TWO longer mounting screws with repeated callout3. It supplies no tightening torque, extra ordering number or measured dimensions beyond the table.
- Remark1: only the modified vacuum attachment is factory-available. Remark2: original handle no longer available. Remark3, printed against the new screw row, states handle 4227 791 0301 was ALSO supplied temporarily; it is not the new screw number and its dates are unspecified. Remark4 retains the original short screw as a spare for older machines. All other parts remain as before. These are1996 availability statements,not present stock.
- This section says introduction IN PROGRESS, without a numeric handle cutoff. The separate shroud/guard cutoff X 30 310 719 is not automatically a handle production boundary.
- TI42/1996 covers BG 72 and BG 75, printed series4227. Later 2012 BG75 IPL sheets are navigation, not an original1996 configuration or a BG72 IPL. No hardware operation was performed.
Source: TI 42/1996, p. 1 · TI 42/1996, p. 2 — BG 72 / BG 75 vacuum handle: longer screws and unchanged kit number.
Part numbers (6)
- 4227 007 1000 — Vacuum attachmentSame number,modified contents · BG72/BG75;historical summary includes items2–4
- 4227 791 0300 — HandleOriginal version · BG72/BG75 vacuum attachment
- 4227 790 0350 — HandleNew version · BG72/BG75;includes new screw item3
- 9022 341 1080 — Spline screw M5 x 35 x 22New longer mounting screw · Two per handle in TI42;printed dimension retained
- 9022 341 1050 — Spline screw M5 x 25Original short screw · Two;remains spare for older machines
- 4227 791 0301 — HandleTemporary supplied version · Mentioned in remark3;no serial/date boundary
Conditional replacement · BG 75
BG 75: revised vacuum elbow and same-number attachment
Marked elbow includes clamp and screw; vacuum introduction is in progress, without a serial cutoff.
in progress — Vacuum-attachment introduction only; no numeric cutoff supplied. Do not transfer the separate blower-tube cutoff.
- Original elbow 4227 708 6900 is replaced by 4227 700 6900 in connection with the blower-tube modification in section2. The housing and elbow gain MARKINGS for correct assembly and alignment; drawing358TI005 KN shows the coupling, aligned markings, insertion arrow and clamp. ORIGINAL AND NEW ELBOWS ARE FULLY INTERCHANGEABLE according to the source. No clamp torque or unprinted assembly operation is supplied.
- Vacuum attachment 4227 007 1000 keeps the SAME ORDER NUMBER in both summary columns. The order number alone therefore does not identify its original versus modified contents. Item1 attachment includes item2 new elbow 4227 700 6900; item2 includes item3 clamp 4227 700 7102; item3 includes item4 screw 4227 701 5000. Dashes in the original clamp/screw columns are not part numbers or a separate deletion instruction.
- Vacuum modification introduction is IN PROGRESS. The connection to section2 does not assign the blower-only X 38 705 142 cutoff to the vacuum attachment. Remark2 permits the NEW ATTACHMENT AND ELBOW ON OLDER MACHINES; no minimum serial for repair use is supplied.
- Vacuum summary remark1 says the ORIGINAL VERSION OF THE ATTACHMENT is NO LONGER AVAILABLE FROM FACTORY despite its unchanged order number. Remark3 separately says the ORIGINAL ELBOW is supplied ONLY AS LONG AS EXISTING STOCKS LAST. Do not collapse these two supply rules or label the entire unchanged attachment number unavailable.
- The exact BG75 vacuum IPL has attachment 4227 007 1000 and new elbow/clamp/screw at positions4/5/6, supporting this assembly binding. The other hose clip at position1 is not the item3 clamp in this TI. TI10 supplies no suction-tube change or housing-lug removal exception; do not import the preceding BE55 TI09 procedure into BG75.
- Historical TI10/1998, BG 75 blower, series4227 ONLY. Shared parts do not extend this note to BE55, BG72 or later blowers. Factory availability is historical, not current stock. Source-stated interchange is not a reproduced physical fit test. No hardware operation was performed.
Source: TI 10/1998, p. 1 · TI 10/1998, p. 2 — Section1 complete prose, drawing358TI005 KN, four summary rows/inclusions and all three remarks; section2 cross-reference.
Part numbers (5)
- 4227 007 1000 — Vacuum attachment; unchanged number, revised contentsOriginal version unavailable; new version usable on older machines · BG 75; exact configuration and restrictions in this note
- 4227 708 6900 — Original elbowFactory supply only while existing stocks last · BG 75; exact configuration and restrictions in this note
- 4227 700 6900 — Marked elbow; includes clamp item3New; source-stated full interchange · BG 75; exact configuration and restrictions in this note
- 4227 700 7102 — Clamp; includes screw item4New elbow inclusion · BG 75; exact configuration and restrictions in this note
- 4227 701 5000 — ScrewIncluded in clamp · BG 75; exact configuration and restrictions in this note
Wrong number or missing part for the BG 75? Report a correction →