← BG 75

Stihl 4227 · Section G · 7 of 8 · 33 parts

Fan housing

Fits BG 75.

Parts diagrams →

Historical fitment & changes (5) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112121314151617181922021222324252627282933303132456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (33)

PosPart numberDescriptionQty
1 4227 700 4100 Fan housing, inside 1
2 9022 341 0980 Spline screw IS-M5x16 3
3 4227 704 7900 Washer 2
4 4227 704 3400 Fanwheel 1
5 9210 280 1100 Hexagon nut M8 1
6 4227 700 4110 Fan housing, outer 1
7 9210 262 0600 Hexagon nut M4 1
8 9074 478 4545 Pan head self-tapping screw IS-P6x26.5 6
9 4227 706 8000 Screen 1
10 4227 704 0900 Shaft 1
11 0000 998 0400 Torsion spring 1
12 9307 021 0100 Washer 4.3 2
13 9075 478 2995 NLA Pan head self-tapping screw IS-D4x12 1
14 9025 313 0741 Spline screw M4x25 1
15 4227 182 1000 Throttle trigger 1
16 4227 182 1500 Throttle rod 1
17 4227 432 2000 Slide 1
18 4227 442 1600 Contact spring 1
19 9104 003 0660 Self-tapping screw P4x12 1
20 4227 791 7900 Bushing 1
21 4227 700 2101 Shroud Fitment / change note → 1
22 9074 478 4425 Pan head self-tapping screw IS-P6x19 7
23 4227 700 1800 Blower tube Fitment / change note → 1
24 4227 700 7102 Hose clip Fitment / change note → 1
25 4227 701 5000 Screw Fitment / change note → 1
26 4227 708 6300 NLA Nozzle 1
27 4227 708 0105 Adapter option 1
28 4227 700 7105 Hose clip option 3
29 4227 708 3405 Tube option 3
30 4227 708 6905 Manifold option 2
31 0000 967 3700 Warning pictogram HS 1
32 0000 967 3693 Warning pictogram Filler cap 1
Not numbered on the diagram — assemblies, kits and options
— 4227 007 1005 Gutter cleaning kit Fitment / change note → option 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · BG 75

BG 75: new powerhead, performance and sound levels

25.4 cm³, 34x28 mm, 0.75 kW; same intended applications as BG 72.

  • BG 75 replaces BG 72 with more torque and power, for the same applications/users. Five-part precision-machined crankshaft; four-port cylinder with larger cooling area; larger-volume improved-material filter; two-chamber muffler with easier spark-arrestor servicing; ElastoStart handle. These design descriptions do not establish component interchange.
  • Engine 25.4 cm³ (1.55 cu.in), bore 34 mm (1.34 in), stroke 28 mm (1.10 in), power 0.75 kW (1.0 PS). In blower mode, flow 640 m³/h (359 cfm), speed 60 m/s (198 ft/s). Complete unit WITHOUT TOOLS 4.3 kg (9.6 lb); not a dry-weight statement.
  • Blower weighted equivalent sound pressure Lpeq 89 dB(A), ISO 6081; sound power Lweq 100 dB(A), ISO 3744. Footnote weights idle/full-load/no-load for EQUAL exposure durations; these are not interchangeable acoustic metrics.
  • Page 2 specification line labels “Muffler: Intake air silencer”, while the technical description separately calls the muffler two-chamber. Preserve this wording rather than silently treating intake and exhaust silencers as the same part.
  • Historical BG 75 type 4227 evidence only; BG 72 replacement is not parts interchangeability. No serial cutoff or calendar introduction date is supplied. No hardware operation was performed.

Source: TI 16/1996, p. 1 · TI 16/1996, p. 2 · TI 16/1996, p. 4 — new powerhead, performance and sound levels.

No additional parts-table entry added.

Service note · BG 75

BG 75: vacuum and gutter-cleaning kits

Two optional user accessories; no installation or cross-model compatibility inferred.

  • Vacuum attachment kit 4227 007 1000 and gutter-cleaning kit 4227 007 1005 are special user accessories for BG 75. Current exact-model vacuum/fan sheets retain the same kit numbers. The TI provides no installation steps, package inventory or compatibility beyond BG 75.
  • Historical BG 75 type 4227 evidence only; BG 72 replacement is not parts interchangeability. No serial cutoff or calendar introduction date is supplied. No hardware operation was performed.

Source: TI 16/1996, p. 1 · TI 16/1996, p. 4 — vacuum and gutter-cleaning kits.

Part numbers (2)
  • 4227 007 1000 — Vacuum attachment kitTI16/1996 listed item · BG 75
  • 4227 007 1005 — Gutter-cleaning kitTI16/1996 listed item · BG 75

Service note · BG 75

BG 75: fastener-specific torque table and ambiguous crankcase row

All 17 torque values retained; no blanket torque based only on thread size.

  • All values Nm. Socket-head IS-M5x25 crankcase 9.5; second IS-M5x25 row prints “Crankcase” on one line and “Spacer flange to cylinder” on the next, with5.5 aligned to the latter. Preserve that ambiguous two-line label; do not replace the9.5 crankcase value wholesale with5.5.
  • IS-DG5x24 cylinder to crankcase 9.5; IS-M5x16 muffler to cylinder 9.5, starter to crankcase 5.5, muffler to crankcase 9.5. IS-M4x25x10 intake screen 2.5; M8 carrier 20.0; IS-M4x20 ignition module to cylinder 4.5.
  • Plastoform IS-P5.5x12 rope rotor in starter cover 2.5; IS-P6x19 shroud/fan housing 3.5 and fuel tank/fan housing 3.5. M8 nuts: shaft ZS/crankshaft 21.0, fanwheel/shaft 18.0. M5 nut air-filter cover AND carburetor to cylinder 4.0. IS-P6x26.5 fan housing halves5.5; M14x1.25 spark plug 20.0.
  • Carrier row has no fastener designation in the first column; do not invent one. No lubricated-thread condition or staged tightening sequence stated. Different components sharing M8 or M5 threads retain different values.
  • Historical BG 75 type 4227 evidence only; BG 72 replacement is not parts interchangeability. No serial cutoff or calendar introduction date is supplied. No hardware operation was performed.

Source: TI 16/1996, p. 1 · TI 16/1996, p. 6 — fastener-specific torque table and ambiguous crankcase row.

No additional parts-table entry added.

Historical fitment · BG 72 / BG 75

BG 72 / BG 75 shroud: series4137-engine adaptation

4227 700 2100 → 4227 700 2101 from X 30 310 719.

X 30 310 719 — Shroud and guard modification introduced from this machine number on the BG72/BG75 bulletin scope;not a universal whole-machine or handle cutoff.

  • Section2 and its one-row summary both specify replacement of shroud 4227 700 2100 by 4227 700 2101 FROM machine number X 30 310 719. The new shroud is adapted for the series4137 engine; this does not rename every BG72/BG75 as series4137 or establish engine interchange.
  • The original shroud is no longer factory-available in this1996 notice. No instruction for retrofitting the new shroud to earlier machines,extra conversion parts,or current supply claim is provided. The same cutoff is independently printed for the guard;the handle section remains introduction in progress.
  • TI42/1996 covers BG 72 and BG 75, printed series4227. Later 2012 BG75 IPL sheets are navigation, not an original1996 configuration or a BG72 IPL. No hardware operation was performed.

Source: TI 42/1996, p. 2 — BG 72 / BG 75 shroud: series4137-engine adaptation.

Part numbers (2)
  • 4227 700 2100 — ShroudOriginal version · BG72/BG75 before stated shroud change
  • 4227 700 2101 — ShroudNew version · BG72/BG75 from X30310719;adapted for series4137 engine

Conditional replacement · BG 75

BG 75: marked blower tube from X 38 705 142

New blower tube includes clamp and screw; source-stated interchange also permits older-machine use.

X 38 705 142 — Blower-tube production introduction only; not vacuum introduction, model identification or a lower bound on older-machine replacement.

  • Original blower tube 4227 708 3400 is replaced by 4227 700 1800 FROM machine number X 38 705 142. Both prose and summary print that exact X-prefixed cutoff. It is production introduction for this BG75 blower-tube revision, not a model-identification range or the vacuum introduction.
  • The housing and blower tube gain MARKINGS for correct assembly and alignment. ORIGINAL AND NEW BLOWER TUBES ARE FULLY INTERCHANGEABLE according to the source. Summary remark2 explicitly permits the NEW VERSION ON OLDER MACHINES, so the cutoff is not a lower limit on replacement eligibility.
  • Blower summary item1 new tube includes item2 clamp 4227 700 7102; item2 includes item3 screw 4227 701 5000. The original clamp/screw columns contain dashes. No clamp torque, housing replacement number or unprinted machining procedure is supplied.
  • Summary remark1 retains the original tube in factory supply ONLY AS LONG AS EXISTING STOCKS LAST. This historical stock-exhaustion rule is distinct from the vacuum attachment original-version unavailability and is not current availability.
  • The exact BG75 fan-housing IPL agrees at positions23/24/25 with new tube 4227 700 1800, hose clip 4227 700 7102 and screw 4227 701 5000. Its gutter-cleaning kit tubes/clips are separate rows and not substitutions established by TI10. Footer last TI41.97, copyright1998 and documentation6274 are bibliographic context, not delegated fitting instructions; earlier source conflicts remain unchanged.
  • Historical TI10/1998, BG 75 blower, series4227 ONLY. Shared parts do not extend this note to BE55, BG72 or later blowers. Factory availability is historical, not current stock. Source-stated interchange is not a reproduced physical fit test. No hardware operation was performed.

Source: TI 10/1998, p. 2 — Section2 complete prose, three summary rows/inclusions, exact cutoff, both remarks and footer.

Part numbers (4)
  • 4227 708 3400 — Original blower tubeFactory supply only while existing stocks last · BG 75; exact configuration and restrictions in this note
  • 4227 700 1800 — Marked blower tube; includes clamp item2New; source-stated full interchange · BG 75; exact configuration and restrictions in this note
  • 4227 700 7102 — Clamp; includes screw item3New tube inclusion · BG 75; exact configuration and restrictions in this note
  • 4227 701 5000 — ScrewIncluded in clamp · BG 75; exact configuration and restrictions in this note

Wrong number or missing part for the BG 75? Report a correction →