← HS 81 R, HS 81 RC, HS 81 T, HS 81 TC, HS 86 R, HS 86 T

Stihl 4237 · Section B · 2 of 14 · 18 parts

Ignition system, Clutch

Fits HS 81 R, HS 81 RC, HS 81 T, HS 81 TC, HS 86 R, HS 86 T.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415161718234567889
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (18)

PosPart numberDescriptionQty
1 4237 400 1202 Flywheel Fitment / change note → 1
2 0000 955 0802 Collar nut M8x1 1
3 4237 400 1302 Ignition module 1
4 4237 405 1000 Spark plug boot 1
5 0000 998 0604 Torsion spring 1
6 4237 431 2100 Connector tag 1
7 9291 021 0100 Washer 4.3 1
8 9075 478 3018 Pan head self-tapping screw IS-D4x18 2
9 0000 400 7009 Spark plug Bosch USR7AC 1
10 4237 160 2000 Clutch 1
11 not sold separately Clutch shoe not available as a separate item 2
12 0000 961 0608 Ring 2
13 0000 958 1000 Washer 16x10x0.5 2
14 0000 958 0609 Washer 2
15 0000 951 0606 Hexagon head screw 2
16 0000 997 5502 Tension spring 1
17 4237 021 3000 Engine housing 1
18 0000 951 1100 Screw IS-D5x20 2

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · HS 81 R / HS 81 T / HS 86 R / HS 86 T

HS 81 / HS 86: flywheel retrofit and two-dome puller

The new flywheel works with standard or new Easy2Start starters.

  • New flywheel 4237 400 1202 replaces 4237 400 1201 (summary item 17, remarks 1 and 2: previous no longer factory available; new also usable on older machines). Section 6 says the new flywheel works with the STANDARD rewind starter OR new Easy2Start system.
  • The flywheel has TWO THREADED DOMES and is removed with puller 1135 890 4500, shown in the original drawing. No puller thread dimensions, tightening torque or complete removal procedure is supplied.
  • This two-starter compatibility does not permit the new Easy2Start housing on the old flywheel; section 4.1 expressly requires the new flywheel. The housing-number conflict and exact TCE catalog-binding limit remain separate.
  • Historical English-USA 2007 source, not present-day stock or approval for unlisted variants. No numeric serial cutoff is supplied. No physical interchange test was performed.

Source: TI 64/2007, p. 5 · TI 64/2007, p. 7 — HS 81 / HS 86: flywheel retrofit and two-dome puller.

Part numbers (3)
  • 4237 400 1201 — FlywheelPrevious · HS 81 R / HS 81 T / HS 86 R / HS 86 T; source restrictions apply
  • 4237 400 1202 — FlywheelNew; standard or Easy2Start · HS 81 R / HS 81 T / HS 86 R / HS 86 T; source restrictions apply
  • 1135 890 4500 — PullerTwo threaded domes · HS 81 R / HS 81 T / HS 86 R / HS 86 T; source restrictions apply

Wrong number or missing part for the HS 81 R, HS 81 RC, HS 81 T, HS 81 TC, HS 86 R, HS 86 T? Report a correction →