← HS 81 R, HS 81 RC, HS 81 T, HS 81 TC, HS 86 R, HS 86 T

Stihl 4237 · Section C · 3 of 14 · 19 parts

Rewind starter

Fits HS 81 R, HS 81 RC, HS 81 T, HS 81 TC, HS 86 R, HS 86 T.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
11011121314151623456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (19)

PosPart numberDescriptionQty
1 4237 080 1802 Fan housing 1
2 9416 868 6650 Rivet 6.5x0.5x8.8 1
3 4237 190 0600 Rewind spring 1
4 1123 195 0400 Rope rotor 1
5 4237 195 8200 Starter rope Ø 2.7x1010 mm 1
6 4140 195 3400 Starter grip 1
7 not sold separately Pawl not available as a separate item 1
8 not sold separately Washer not available as a separate item 1
9 not sold separately Spring not available as a separate item 1
10 0000 967 3700 Warning pictogram HS 1
11 4237 967 1500 Model plate HS 81 R 1
12 4237 967 1501 NLA Model plate HS 81 T 1
13 4237 967 1503 NLA Model plate HS 86 R 1
14 4237 967 1502 NLA Model plate HS 86 T 1
15 0000 951 1100 Screw IS-D5x20 3
16 9074 478 4420 Pan head self-tapping screw IS-P6x18 2
Not numbered on the diagram — assemblies, kits and options
— 4237 080 2108 Fan housing with rewind starter 1
— 0000 930 2281 Starter rope Ø 2.7 mm x 30.8 m option 1
— 4237 190 5150 Pawl 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · HS 81 R / HS 81 T / HS 86 R / HS 86 T

HS 81 / HS 86: flywheel retrofit and two-dome puller

The new flywheel works with standard or new Easy2Start starters.

  • New flywheel 4237 400 1202 replaces 4237 400 1201 (summary item 17, remarks 1 and 2: previous no longer factory available; new also usable on older machines). Section 6 says the new flywheel works with the STANDARD rewind starter OR new Easy2Start system.
  • The flywheel has TWO THREADED DOMES and is removed with puller 1135 890 4500, shown in the original drawing. No puller thread dimensions, tightening torque or complete removal procedure is supplied.
  • This two-starter compatibility does not permit the new Easy2Start housing on the old flywheel; section 4.1 expressly requires the new flywheel. The housing-number conflict and exact TCE catalog-binding limit remain separate.
  • Historical English-USA 2007 source, not present-day stock or approval for unlisted variants. No numeric serial cutoff is supplied. No physical interchange test was performed.

Source: TI 64/2007, p. 5 · TI 64/2007, p. 7 — HS 81 / HS 86: flywheel retrofit and two-dome puller.

Part numbers (3)
  • 4237 400 1201 — FlywheelPrevious · HS 81 R / HS 81 T / HS 86 R / HS 86 T; source restrictions apply
  • 4237 400 1202 — FlywheelNew; standard or Easy2Start · HS 81 R / HS 81 T / HS 86 R / HS 86 T; source restrictions apply
  • 1135 890 4500 — PullerTwo threaded domes · HS 81 R / HS 81 T / HS 86 R / HS 86 T; source restrictions apply

Wrong number or missing part for the HS 81 R, HS 81 RC, HS 81 T, HS 81 TC, HS 86 R, HS 86 T? Report a correction →