Stihl 4308 · Section C · 2 of 6 · 12 parts
Support frame
Fits BT 308.
Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.
Parts (12)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4308 790 1705 | Handlebar Fitment / change note → | 2 |
| 2 | 4308 790 1605 | Inner section Fitment / change note → | 2 |
| 3 | 4308 791 6100 | Hexagon head screw Fitment / change note → | 8 |
| 4 | 4308 791 2100 | Retainer Fitment / change note → | 4 |
| 5 | 0000 903 1511 | Cable tie | 2 |
| 6 | 4201 180 1100 | Throttle cable | 1 |
| 7 | 4308 182 8800 | Terminal sleeve | 2 |
| 8 | 9793 003 0030 | Grease nipple D | 1 |
| 9 | 0000 997 0427 | Compression spring | 1 |
| 10 | 0000 937 3000 | Screw nipple | 1 |
| 11 | 0000 967 3703 | Warning pictogram BT | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4308 790 1805 | Support frame Fitment / change note → | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · BT 308 / BT 360
BT 308 / BT 360 folding frame: retained hinge screws
Revised frame 1805 uses interconnected hinge screws and modified frame sections.
- Handle frame 4308 790 1801 becomes 4308 790 1805. The revision is intended to increase strength and ease handling. Standardized hinge screws are interconnected by retainer 4308 791 2100 so they cannot be lost; the page 1 arrow identifies this retainer, not a separate locking latch.
- Inner section 4308 790 1600 becomes 4308 790 1605; handlebar 4308 790 1700 becomes 4308 790 1705. New hex-head screw is 4308 791 6100. Exploded page 2 figure identifies inner section 1, handlebar 2, retainer 3 and screw 4; these are TI item numbers, not later IPL positions.
- Summary describes the complete frame as including items 1–8, but NEW column has parts only in rows 1–4; old rows 5–8 have dashes. Do not claim deleted old hardware is supplied with the new frame. All other parts as before. Original complete frame is NO LONGER factory available; introduction IN PROGRESS, no numeric serial or torque printed.
- Retained BT 308 C and BT 360 L list1805 and these new components. BT 360 also has1800 and other versions; no automatic 1800-to1805 supersession or extension to BT 309 is inferred. Footer July 3, 1995 and previous TI 28.87 are bibliographic, not changeover dates.
- Historical TI guidance for the named models only. Shared catalog sheets do not extend applicability to other variants or successors. Factory supply statements are historical, not current stock guarantees or verified physical interchange. No hardware operation was performed.
Source: TI 32/1995, p. 1 · TI 32/1995, p. 2 — BT 308 / BT 360 folding frame: retained hinge screws.
Part numbers (8)
- 4308 790 1801 — Original complete frameno longer factory available · BT 308 / BT 360; BT 308 / BT 360 folding frame: retained hinge screws
- 4308 790 1805 — Revised complete framenew assembly · BT 308 / BT 360; BT 308 / BT 360 folding frame: retained hinge screws
- 4308 790 1600 — Original inner sectionretained spare · BT 308 / BT 360; BT 308 / BT 360 folding frame: retained hinge screws
- 4308 790 1605 — New inner sectionnew frame · BT 308 / BT 360; BT 308 / BT 360 folding frame: retained hinge screws
- 4308 790 1700 — Original handlebarretained spare · BT 308 / BT 360; BT 308 / BT 360 folding frame: retained hinge screws
- 4308 790 1705 — New handlebarnew frame · BT 308 / BT 360; BT 308 / BT 360 folding frame: retained hinge screws
- 4308 791 2100 — Hinge retainernew captive-screw arrangement · BT 308 / BT 360; BT 308 / BT 360 folding frame: retained hinge screws
- 4308 791 6100 — Hex-head hinge screwnew captive-screw arrangement · BT 308 / BT 360; BT 308 / BT 360 folding frame: retained hinge screws
Service note · BT 308 / BT 360
BT 308 / BT 360 original frame: individual spares remain
Old complete-frame withdrawal does not delete its individual frame and hinge parts.
- Original inner section 4308 790 1600, handlebar 4308 790 1700, ring 4308 791 8400, washer 0000 958 0809, hex-head screw 9008 319 1780 and tommy screw 4308 790 7500 ALL REMAIN AVAILABLE AS SPARES under remark 2. Only the original COMPLETE frame carries no-longer-available remark 1.
- Ring, washer, old hex screw and tommy screw have DASHES in the new-version column. They are old-configuration spares, not an instruction to add them to the retainer-equipped new frame or mix hinge generations. No individual-component retrofit approval is printed.
- Later BT 360 L lists washer 9291 021 0180 instead of TI 0000 958 0809; that difference is not evidence of a supersession. Introduction in progress, no serial cutoff. All other parts as before.
- Historical TI guidance for the named models only. Shared catalog sheets do not extend applicability to other variants or successors. Factory supply statements are historical, not current stock guarantees or verified physical interchange. No hardware operation was performed.
Source: TI 32/1995, p. 2 — BT 308 / BT 360 original frame: individual spares remain.
Part numbers (6)
- 4308 790 1600 — Original inner sectionretained spare · BT 308 / BT 360; BT 308 / BT 360 original frame: individual spares remain
- 4308 790 1700 — Original handlebarretained spare · BT 308 / BT 360; BT 308 / BT 360 original frame: individual spares remain
- 4308 791 8400 — Original ringold configuration spare · BT 308 / BT 360; BT 308 / BT 360 original frame: individual spares remain
- 0000 958 0809 — Original washerold configuration spare · BT 308 / BT 360; BT 308 / BT 360 original frame: individual spares remain
- 9008 319 1780 — Original hex-head screwold configuration spare · BT 308 / BT 360; BT 308 / BT 360 original frame: individual spares remain
- 4308 790 7500 — Original tommy screwold configuration spare · BT 308 / BT 360; BT 308 / BT 360 original frame: individual spares remain
Wrong number or missing part for the BT 308? Report a correction →