← BT 308 · BT 360

Stihl 4308 · Section E · 3 of 6 · 30 parts

08 S - assembly Coupler link, Control lever

Fits BT 308.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415161718192212223242526272829344056789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (30)

PosPart numberDescriptionQty
1 9470 435 0540 Key 4x4x14 1
2 9455 621 3110 Circlip 28x1.5 1
3 4308 162 3201 Carrier 1
4 9455 621 1130 Circlip 12x1 1
5 4104 162 3100 Coupling element 0.404" 1
6 4308 640 2802 Spacer Fitment / change note → 1
7 4308 641 3500 Hexagon head screw 1
8 9485 648 0810 Cup spring 20x8.2x0.9 1
9 4308 640 7900 Locking lever 1
10 9214 320 0900 Lock nut M6 1
11 9007 319 1420 NLA Hexagon head screw M6x45 Fitment / change note → 2
12 9291 021 0140 Washer 6.4 Fitment / change note → 2
13 4308 182 6400 Adjusting screw 1
14 4308 180 1800 Throttle control 1
15 0000 997 1002 Compression spring 1
16 9227 216 0600 Knurled nut M4 1
17 4308 642 7800 Washer 1
18 4308 180 0700 Control lever 1
19 9063 319 1440 Countersunk screw M6x55 1
21 9321 630 0140 Spring washer 6 1
22 9210 319 0900 Hexagon nut M6 1
23 4302 791 8600 Clamp 2
24 9007 319 2510 Hexagon head screw M10x75 4
25 9321 630 0200 Spring washer 10 4
26 9210 260 1300 Hexagon nut M10 4
27 4309 140 7300 Cover plate 1
28 0812 012 1119 Wrench 13x17 1
29 0812 260 1008 Allen key 5 1
40 9033 346 1400 Socket head screw M6x40 Fitment / change note → 2
Not numbered on the diagram — assemblies, kits and options
— 4308 162 3101 Coupling element 3/8" not illustrated 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · BT 308 / BT 309 / BT 360

BT 308 / BT 309 / BT 360: adapter replacement requires matching bosses and hardware

Kit 4308 640 2802 supplies the modified adapter, two M6x45 hex screws and two A 6.4 washers.

  • Adapter is the interface between POWERHEAD and DRILLING GEAR, not the carburetor adapter. Mounting-boss HEIGHT AND DIAMETER change to match hex-head screws, replacing pan-head screws with spline socket to simplify servicing. Do not treat this as an unsupported screw-only substitution into the old bosses.
  • New complete kit 4308 640 2802 includes items 1–3: modified adapter (1), TWO washers A 6.4, 9291 021 0140 (2), and TWO M6x45 hex-head screws, 9007 319 1420 (3). Drawing shows washers between screw heads and bosses. Printed MOQ H 10 for washers is an ORDER quantity, not ten fitted washers; screw/kit MOQ is 1.
  • Old bare adapter 4308 641 2801 is no longer factory-available (remark 1). New bare version is marked -*- and NOT AVAILABLE SEPARATELY (remark 2); no invented new bare-adapter number. Old M6x40 pan-head screw 9033 346 1400 REMAINS A SPARE FOR OLDER MACHINES (remark 3). No universal deletion of old screws.
  • Introduction IN PROGRESS, no serial/date cutoff or torque supplied. Supply statements are historical, not current stock. TI heading calls BT 309 series 4309; retained exact-model BT 309 sheet is consolidated under 4311. Binding follows exact model AND kit number, not inferred series equivalence. Retained 2012 sheets call kit Spacer; these labels do not replace the historical adapter description or create a different part.
  • Footer 24 August 1994; previous BT 360 TI24.90 is bibliography, not an extra unmodeled requirement.
  • Historical TI 31/1994 guidance only. No successor or unlisted model applicability inferred. No physical interchange test was performed. No hardware operation was performed.

Source: TI 31/1994, p. 1 — BT 308 / BT 309 / BT 360: adapter replacement requires matching bosses and hardware.

Part numbers (5)
  • 4308 640 2802 — Complete modified adapter kit; items 1–3new assembly · BT 308 / BT 309 / BT 360: adapter replacement requires matching bosses and hardware
  • 4308 641 2801 — Original bare adapterold; unavailable · BT 308 / BT 309 / BT 360: adapter replacement requires matching bosses and hardware
  • 9033 346 1400 — M6x40 pan-head screw with spline socketold; retained for older machines · BT 308 / BT 309 / BT 360: adapter replacement requires matching bosses and hardware
  • 9291 021 0140 — A6.4 washer; two fittednew hardware · BT 308 / BT 309 / BT 360: adapter replacement requires matching bosses and hardware
  • 9007 319 1420 — M6x45 hex-head screw; two fittednew hardware · BT 308 / BT 309 / BT 360: adapter replacement requires matching bosses and hardware

Wrong number or missing part for the BT 308? Report a correction →