← BT 308 · BT 360

Stihl 4308 · Section D · 4 of 14 · 27 parts

Rewind starter

Fits BT 360.

Parts diagrams →

Historical fitment & changes (3) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111213141516171822021222324253456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (27)

PosPart numberDescriptionQty
1 4201 080 2102 Fan housing with rewind starter 1
2 9443 825 7130 Hollow rivet 7.5x1x6.8 3
3 1110 084 9102 Bushing 1
4 0000 967 2035 Nameplate STIHL 1
5 0000 967 2038 Nameplate MADE IN BRAZIL 1
6 0000 967 2020 NLA Nameplate STIHL 1
7 0000 974 1000 Round head rivet 3x6 2
8 1106 195 9015 Washer 1
9 4201 190 0600 Rewind spring 1
10 9076 478 2996 Pan head self-tapping screw P4x12 2
11 1117 190 1011 Rope rotor 1
12 1124 195 7200 Pawl 1
13 0000 190 3414 Starter grip ElastoStart Ø 4.5 mm 1
14 0000 190 2901 Starter rope Ø 4.5 mm → replaced by 0000 190 3500 TI 21/2009 1
15 1118 162 8935 Washer Fitment / change note → 2
16 1117 195 3500 Spring 1
17 9022 341 1070 Spline screw IS-M5x30 1
18 9022 313 1030 Spline screw IS-M5x23 2
20 1107 195 8200 Starter rope Ø 4.5x1000 mm Fitment / change note → 1
21 1117 190 0601 Rewind spring 1
22 9099 021 0810 Self-tapping screw 4.2x9.5 1
23 4201 195 9300 Ring 1
24 9099 021 2810 Self-tapping screw 3.9x19 1
25 9416 868 6530 Hollow rivet 6.5x0.5x6.8 3
Not numbered on the diagram — assemblies, kits and options
— 1117 007 1014 Rope rotor kit 1
— 0000 930 2295 NLA Starter rope Ø 4.5mm / 28 pieces option 1
— 0000 930 2200 NLA Starter rope Ø 4.5 mm x 30.5 m Fitment / change note → option 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · BT 360

BT 360: standard ElastoStart and unchanged fan-housing number

1122 190 3400 grip; complete starter 4201 080 2104 retains its number but only modified version supplied.

X 32 280 389 — BT 360 standard ElastoStart change, series 4308; not a TS 360 changeover.

  • From machine number X 32 280 389 BT 360 earth augers come STANDARD with ElastoStart. The three named components are starter grip, RUBBER ELEMENT and starter rope.
  • New ElastoStart grip 1122 190 3400 replaces original starter grip 1121 195 3400. Remark 2 keeps the original grip available for older machines and other models. This is not the 1128 grip of the FS 360 bulletin or spring-type accessory 0000 190 3400.
  • Item 1 fan housing WITH REWIND STARTER remains 4201 080 2104, includes table items 2–6, and only its MODIFIED version is available from factory (remark 1). Items 2/3 and 4/5 are old/new alternatives, not evidence that every assembly contains both grips and both ropes. All other parts as before; no universal internal interchange is promised by the unchanged assembly number.
  • Construction, function and benefits are expressly delegated to TI29/1992, absent from retained bulletin and mounted tipages inventories. This remains a named source gap; no spring-accessory construction or rope-repair procedure is substituted.
  • The footer says “Last Technical Information on model TS 360: 32.95” despite the BT 360 earth-auger header and main text. This unresolved footer/header mismatch does not extend this bulletin to TS 360 or change its BT 360 serial boundary.
  • Historical TI 11/1996 evidence for BT 360 only. The retained 2012 BT 360 starter IPL has fan housing 4201 080 2102 and later grip/rope numbers, whereas this TI gives 4201 080 2104. These edition differences remain unresolved; no alias, substitution chain or invented drawing position is assigned. No BT 308 applicability is inferred. No hardware operation was performed; supply statements are historical, not current stock.

Source: TI 11/1996, p. 1 — BT 360: standard ElastoStart and unchanged fan-housing number.

Part numbers (3)
  • 4201 080 2104 — Fan housing with rewind startersame number; modified version only; includes2–6 · BT 360; TI11/1996 specified configuration
  • 1121 195 3400 — Original starter gripretained older-machine/other-model supply · BT 360; TI11/1996 specified configuration
  • 1122 190 3400 — ElastoStart starter gripnew standard rubber-element version · BT 360; TI11/1996 specified configuration

Historical fitment · BT 360

BT 360: second starter-post washer and quantity wording

1118 162 8935 unchanged; table changes quantity 1 → 2, while prose says second washer if required.

X 32 280 389 — BT 360 standard ElastoStart change, series 4308; not a TS 360 changeover.

  • The prose says a SECOND WASHER will be fitted on the starter post IF REQUIRED to further improve operation. Table item 6 retains number 1118 162 8935 and remark 3 states quantity changed from 1 to 2.
  • Both statements are preserved: the tabulated quantity change must not erase the conditional IF REQUIRED installation wording. No measurement, clearance threshold, selection rule or installation stack order is supplied. The TI does not justify blindly adding a washer to every starter.
  • Washer item 6 is included in the fan-housing/rewind-starter assembly item 1. The table says all other parts as before; no additional new washer number or third washer is inferred.
  • The footer says “Last Technical Information on model TS 360: 32.95” despite the BT 360 earth-auger header and main text. This unresolved footer/header mismatch does not extend this bulletin to TS 360 or change its BT 360 serial boundary.
  • Historical TI 11/1996 evidence for BT 360 only. The retained 2012 BT 360 starter IPL has fan housing 4201 080 2102 and later grip/rope numbers, whereas this TI gives 4201 080 2104. These edition differences remain unresolved; no alias, substitution chain or invented drawing position is assigned. No BT 308 applicability is inferred. No hardware operation was performed; supply statements are historical, not current stock.

Source: TI 11/1996, p. 1 — BT 360: second starter-post washer and quantity wording.

Part numbers (1)
  • 1118 162 8935 — Starter-post washersame number; quantity1→2 in table; second washer if required in prose · BT 360; TI11/1996 specified configuration

Historical fitment · BT 360

BT 360: 4.5 mm ElastoStart rope and accessory restrictions

New 1122 190 2900 rope has no printed length; old 1000 mm value is not transferred.

X 32 280 389 — BT 360 standard ElastoStart change, series 4308; not a TS 360 changeover.

  • Original starter rope 1107 195 8200 is Ø4.5 x 1000 mm. New 1122 190 2900 is Ø4.5 mm ONLY; its length is not stated. Original rope remains available for older machines and other models (remark 2). No old 1000 mm length is assigned to the new rope.
  • Original special-accessory rope 0000 930 2200 is Ø4.5 mm x 30.5 m and remains available for older machines/other models (remarks 2/4). New special-accessory rope 0000 930 2268 is Ø4.5 mm (28x), remark 4. The literal 28x qualifier is not converted into an assumed total length, pack count interpretation or cutting scheme.
  • Table items 7/8 are special accessories outside item 1 inclusion of items 2–6. The source does not state that the separately numbered grip package includes either accessory rope. Supply dashes do not override the retention remarks.
  • The footer says “Last Technical Information on model TS 360: 32.95” despite the BT 360 earth-auger header and main text. This unresolved footer/header mismatch does not extend this bulletin to TS 360 or change its BT 360 serial boundary.
  • Historical TI 11/1996 evidence for BT 360 only. The retained 2012 BT 360 starter IPL has fan housing 4201 080 2102 and later grip/rope numbers, whereas this TI gives 4201 080 2104. These edition differences remain unresolved; no alias, substitution chain or invented drawing position is assigned. No BT 308 applicability is inferred. No hardware operation was performed; supply statements are historical, not current stock.

Source: TI 11/1996, p. 1 — BT 360: 4.5 mm ElastoStart rope and accessory restrictions.

Part numbers (4)
  • 1107 195 8200 — Original rope Ø4.5 x1000 mmretained for older machines/other models · BT 360; TI11/1996 specified configuration
  • 1122 190 2900 — New rope Ø4.5 mmlength unspecified · BT 360; TI11/1996 specified configuration
  • 0000 930 2200 — Original rope Ø4.5 mm x30.5 mspecial accessory; retained original supply · BT 360; TI11/1996 specified configuration
  • 0000 930 2268 — New rope Ø4.5 mm (28x)special accessory; literal28x · BT 360; TI11/1996 specified configuration

Wrong number or missing part for the BT 360? Report a correction →