Stihl 4308 · Section E · 5 of 14 · 24 parts
Ignition system, Stop switch
Fits BT 360.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (24)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1108 400 0800 NLA | Ignition module Fitment / change note → | 1 |
| 2 | not sold separately | Ignition lead 325 mm not available as a separate item | 1 |
| 3 | 0000 989 1010 | Grommet | 1 |
| 4 | 1108 440 1102 | Short circuit wire 285 mm / 11.2'' | 1 |
| 5 | 0000 989 0810 | Grommet | 1 |
| 6 | 0000 989 0609 | Grommet | 1 |
| 7 | 4201 405 8800 | Hose | 1 |
| 8 | 0000 989 0816 | Grommet | 2 |
| 9 | 9291 021 0100 | Washer 4.3 | 2 |
| 10 | 9022 313 0680 | Spline screw IS-M4x16 | 2 |
| 11 | 1108 400 1205 | Flywheel Fitment / change note → | 1 |
| 12 | 9211 260 1340 | Hexagon nut M10x1 | 1 |
| 13 | 1110 432 9200 | Grommet | 1 |
| 14 | 4308 430 0500 | Switch | 1 |
| 15 | 4308 432 1000 | Switchbox | 1 |
| 16 | 4308 430 0101 | Slide | 1 |
| 17 | 4308 432 0600 | Cover | 1 |
| 18 | 9074 478 3025 | Pan head self-tapping screw IS-P4x16 | 1 |
| 19 | 4308 432 0200 | Clamp | 1 |
| 20 | 9074 478 4135 | Pan head self-tapping screw IS-P5x20 | 2 |
| 21 | 4308 448 1200 | Lead retainer | 2 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 0000 405 0600 NLA | Ignition lead 1 m not illustratedoption | 1 |
| — | 0000 930 2251 | Ignition lead 10 m not illustratedoption | 1 |
| — | 4308 430 0201 | Stop switch | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Historical fitment · BT 360
BT 360: series 4308 replacement ignition assignment
1108 400 0800 with flywheel 1108 400 1205; 325 mm ignition lead.
- Printed series 4308. Use 1108 400 0800 with flywheel 1108 400 1205.
- Printed ignition-lead length: 325 mm (12 13/16 in). Preserve both printed units.
- TI01/1999 lists replacement combinations for the then-current machines, not every earlier configuration. Older machines are referred to Spare Parts for Previous Models in their own illustrated parts lists; no serial cutoff is supplied here.
- Use only the listed ignition-module/flywheel combinations. The source warns that incorrect combinations can cause excessive RPM or running in reverse; sharing a module number does not make all flywheels interchangeable.
- Universal replacement modules may differ from production modules in maker, shape and part number. The source describes installation/function compatibility within its assignments, not universal compatibility or a project hardware test.
- Some replacement modules require shortening the ignition lead and/or short-circuit wire and crimping a different short-circuit connector. The table gives ignition-lead lengths only; it supplies neither a short-circuit-wire length nor a connector part number. Do not infer that every row needs modification.
- Only the named models and printed series are covered. A shared IPL sheet does not extend this assignment to unnamed models or modern MS equivalents. This 1999 USA bulletin is historical guidance, not current availability.
Source: TI 1/1999, p. 1 · TI 1/1999, p. 3 — 1.1 general restrictions and 1.2.2 power-tool assignments.
Part numbers (2)
- 1108 400 0800 — Replacement ignition moduleAssigned component · BT 360, printed series 4308, listed combination only
- 1108 400 1205 — Assigned flywheelRequired pairing · BT 360, printed series 4308
Wrong number or missing part for the BT 360? Report a correction →