← BT 106 · BT 309

Stihl 4311 · Section D · 4 of 13 · 27 parts

Machine cover

Fits BT 106.

Parts diagrams →

Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111213141516171822344414243444546474856789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (27)

PosPart numberDescriptionQty
1 4132 080 1600 Shroud 1
2 9416 868 6510 Hollow rivet 6.5x0.5x3.0 4
3 4126 431 2100 Connector tag 1
4 9022 341 0960 Spline screw IS-M5x12 → replaced by 9022 341 0980 TI 3/2006 4
5 4129 084 9201 Support 1
6 9074 478 4125 Pan head self-tapping screw IS-5x14 1
7 4129 350 0400 Fuel tank 1
8 4112 358 8100 Insert 4
9 4128 350 0505 Filler cap 1
10 0000 350 0900 Rope 1
11 0000 353 0800 Filler cap retainer 1
12 0000 350 3502 Pickup body Fitment / change note → 1
13 0000 358 1800 Filter 1
14 4129 358 7700 Hose with grommet 1
15 9307 021 0120 Washer 5.3 4
16 9022 341 0980 Spline screw IS-M5x16 4
17 4311 087 3600 Air guide plate 1
18 9438 003 3830 Blind rivet 3.2x8 Fitment / change note → 4
41 4126 359 0700 Gasket 1
42 4116 350 0900 Filler cap retainer 1
43 not sold separately Rope not available as a separate item 1
44 not sold separately Hook not available as a separate item 1
45 4117 358 9300 Strainer Fitment / change note → 1
46 4117 358 8001 Ring Fitment / change note → 1
47 4117 358 1800 Filter Fitment / change note → 1
48 4126 358 8900 Clip Fitment / change note → 1
Not numbered on the diagram — assemblies, kits and options
— 4129 350 0405 Fuel tank 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · BT 106

BT 106: new fuel pickup deletes hose clip but preserves older-machine spares

4117 350 3505→0000 350 3502; old filter supply ends in1998, then replace the whole pickup.

  • Original pickup 4117 350 3505 is replaced by 0000 350 3502 to standardize parts. New pickup has larger filter area, source states improved dirt retention/service life; no measured filtration rating or life extension provided. Generally use new body when original is FAULTY. Clip 4126 358 8900 is NOT REQUIRED FOR NEW BODY, not a general instruction to remove hose retention from old pickup.
  • Original complete pickup supplied only WHILE STOCKS LAST (remark1). Old strainer 4117 358 9300(item 1), ring 4117 358 8001(item 2), and clip 4126 358 8900(item 4) REMAIN AVAILABLE FOR OLDER MACHINES (remark2). Old filter 4117 358 1800(item 3) supplied ONLY UP TO END OF 1998; thereafter COMPLETE NEW PICKUP HEAD must replace it (remark3). These are distinct historical supply rules, not current stock guarantees.
  • Exploded drawing LEFT shows old body, strainer, ring, filter and clip; RIGHT is complete new body. Summary inclusion1–3 describes old assembly’s listed service pieces; no claim that those old internals fit the new sealed-looking body. Typo Pickup boy retained in original only. Introduction IN PROGRESS, no serial cutoff. Footer30 August 1994; prior TI09.91 is bibliography.
  • Historical TI 34/1994 guidance only. No successor or unlisted model applicability inferred. No physical interchange test was performed. No hardware operation was performed.

Source: TI 34/1994, p. 4 — BT 106: new fuel pickup deletes hose clip but preserves older-machine spares.

Part numbers (6)
  • 4117 350 3505 — Original complete pickupold; while stocks last · BT 106: new fuel pickup deletes hose clip but preserves older-machine spares
  • 0000 350 3502 — Complete pickupnew; no old clip · BT 106: new fuel pickup deletes hose clip but preserves older-machine spares
  • 4117 358 9300 — Strainer; item 1old; retained · BT 106: new fuel pickup deletes hose clip but preserves older-machine spares
  • 4117 358 8001 — Ring; item 2old; retained · BT 106: new fuel pickup deletes hose clip but preserves older-machine spares
  • 4117 358 1800 — Filter; item 3old; only to end 1998 · BT 106: new fuel pickup deletes hose clip but preserves older-machine spares
  • 4126 358 8900 — Hose clip; item 4old; retained for older machines · BT 106: new fuel pickup deletes hose clip but preserves older-machine spares

Service note · BT 106

BT 106 shroud: three plastic rivets versus four steel rivets

Mixed old/new cover and air-guide repairs retain the original-type rivets under the stated hole modification.

  • The air guide plate changed from THREE PLASTIC rivets to FOUR STEEL rivets. New cover and new air guide plate each have an additional mounting hole. The text says “for some time”; the table says introduction “in progress”. Neither supplies a precise production boundary.
  • Original blind rivet 5 × 8 (3x), 9438 929 4040; new blind rivet 3.2 × 8 (4x), 9438 003 3830. Original rivet remains a spare for older machines and other models; unnamed other models are NOT positively bound.
  • When mixing NEW and ORIGINAL parts for a repair, drill out rivet holes ON THE NEW PART so ORIGINAL-TYPE rivets can be used. The bulletin does not specify drill diameter, tolerance, tooling or a numerical drilling depth. The 5 mm rivet designation is NOT a validated drill-size instruction. No shroud or air-guide part number is printed.
  • TI01/1997 names BT 106, series 4311. No serial cutoff is printed; “in progress” is not a machine-number boundary. Historical factory supply statements do not establish current availability. No hardware operation was performed.
  • Catalog navigation binds only the matching BT 106 sheets and component numbers. The later IPL’s rounded inch descriptions do not replace the TI’s printed metric/decimal-inch values; no canonical IPL row is changed.

Source: TI 1/1997, p. 3 — BT 106 shroud: three plastic rivets versus four steel rivets.

Part numbers (2)
  • 9438 929 4040 — Blind rivet 5 × 8, three plasticoriginal retained spare · Original or mixed repair as described
  • 9438 003 3830 — Blind rivet 3.2 × 8, four steelnew arrangement · New cover/guide arrangement

Wrong number or missing part for the BT 106? Report a correction →