Stihl 4311 · Section N · 13 of 13 · 17 parts
Augers, Extras
Fits BT 106.
Historical fitment & changes (6) — includes parts and conditions not shown on this drawing.
Parts (17)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4311 680 2515 NLA | Planting auger Ø 150 mm / 5.9" Fitment / change note → | 1 |
| 2 | 9395 021 2360 NLA | Split pin 4.5x40 Fitment / change note → | 1 |
| 3 | 4311 682 3500 | Retaining pin Fitment / change note → | 1 |
| 4 | 4311 680 3305 NLA | Pilot bit Fitment / change note → | 1 |
| 5 | 4404 680 1900 | Planting hole drill Ø 260 mm / 10.2" Fitment / change note → | 1 |
| 6 | 4311 680 1800 NLA | Ice auger Ø 32 mm Fitment / change note → | 1 |
| 7 | 4311 680 2350 NLA | Shank extension 450 mm / 18" Fitment / change note → | 1 |
| 8 | 4311 680 4010 | Chuck Fitment / change note → | 1 |
| 9 | 4311 748 2500 | Hip pad Fitment / change note → option | 1 |
| 40 | not sold separately | Planting hole drill Ø 170 mm / 6.7'' no longer available from factory | 1 |
| 41 | 4311 680 3300 | Pilot bit Fitment / change note → | 1 |
| 42 | 4311 680 3900 | Adapter Fitment / change note → | 1 |
| 43 | 9365 543 2550 | Pin 11x40x37 Fitment / change note → | 2 |
| 44 | 9291 021 0180 | Washer 8.4 Fitment / change note → | 2 |
| 45 | 9339 003 0150 | Spring clip 1.6 Fitment / change note → | 2 |
| 46 | 9007 319 1400 | Hexagon head screw M6x40 Fitment / change note → | 1 |
| 47 | 9214 320 0900 | Lock nut M6 Fitment / change note → | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · BT 106
BT 106: three ice augers retain different diameters and drill heads
32 mm ice/scree and 150/200 mm ice augers are 695 mm long; the two large heads are not interchangeable by inference.
- 32 mm/1.25 in ice-and-scree auger 4311 680 1800 (item 1) includes retaining pin 4311 682 3500 (3). Length 695 mm (remark1). Illustrated as slender continuous auger, not either large detachable-head ice auger.
- 150 mm/5.9 in ice auger 4311 680 1815 (2) includes items 3–10: retaining pin 4311 682 3500, adapter 4311 680 3900 (4), TWO pins 9365 543 2550 (5), TWO A8.4 washers 9291 021 0180 (6), TWO 1.6 spring clips 9339 003 0150 (7), M6x40 screw 9007 319 1400 (8), M6 locknut 9214 320 0900 (9), drill head 4311 680 3015 (10). Length 695 mm.
- 200 mm/7.9 in ice auger 4311 680 1820 (11) includes items 3–9 AND 200 mm drill head 4311 680 3020 (12), NOT 150 mm head10. Length 695 mm. Exploded drawing separately shows removable heads and adapter hardware. No torque or universal head interchange stated.
- Printed fitted2x pin/washer/clip quantities are not MOQ: pins MOQ 5, washers MOQ 10, spring clips MOQ 1, locknuts MOQ 10; other listed rows MOQ 1. Some augers already appeared in sales/parts literature; no numeric changeover. Current retained extras sheet is exact BT 106 navigation; absent historical large ice-auger rows do not establish supersession.
- Historical TI 34/1994 guidance only. No successor or unlisted model applicability inferred. No physical interchange test was performed. No hardware operation was performed.
Source: TI 34/1994, p. 1 · TI 34/1994, p. 2 — BT 106: three ice augers retain different diameters and drill heads.
Part numbers (12)
- 4311 680 1800 — 32 mm ice/scree auger; item 1source-listed; scope and inclusion restrictions retained · BT 106: three ice augers retain different diameters and drill heads
- 4311 680 1815 — 150 mm ice auger; item 2source-listed; scope and inclusion restrictions retained · BT 106: three ice augers retain different diameters and drill heads
- 4311 682 3500 — Retaining pin; item 3source-listed; scope and inclusion restrictions retained · BT 106: three ice augers retain different diameters and drill heads
- 4311 680 3900 — Adapter; item 4source-listed; scope and inclusion restrictions retained · BT 106: three ice augers retain different diameters and drill heads
- 9365 543 2550 — Pin; item 5; twosource-listed; scope and inclusion restrictions retained · BT 106: three ice augers retain different diameters and drill heads
- 9291 021 0180 — A8.4 washer; item 6; twosource-listed; scope and inclusion restrictions retained · BT 106: three ice augers retain different diameters and drill heads
- 9339 003 0150 — Spring clip1.6; item 7; twosource-listed; scope and inclusion restrictions retained · BT 106: three ice augers retain different diameters and drill heads
- 9007 319 1400 — M6x40 hex screw; item 8source-listed; scope and inclusion restrictions retained · BT 106: three ice augers retain different diameters and drill heads
- 9214 320 0900 — M6 locknut; item 9source-listed; scope and inclusion restrictions retained · BT 106: three ice augers retain different diameters and drill heads
- 4311 680 3015 — 150 mm ice drill head; item 10source-listed; scope and inclusion restrictions retained · BT 106: three ice augers retain different diameters and drill heads
- 4311 680 1820 — 200 mm ice auger; item 11source-listed; scope and inclusion restrictions retained · BT 106: three ice augers retain different diameters and drill heads
- 4311 680 3020 — 200 mm ice drill head; item 12source-listed; scope and inclusion restrictions retained · BT 106: three ice augers retain different diameters and drill heads
Service note · BT 106
BT 106: earth and planting augers have distinct blades, inclusion ranges and lengths
120/200 mm earth augers are 695 mm long;150 mm planting auger is 525 mm with a pilot bit.
- 120 mm/4.7 in earth auger 4311 680 2012 (13) includes retaining pin 3 and items 14–17: split pin4.5x40,9395 021 2360 (14); drill head 4311 680 3008 (15), itself including blade 4311 682 3104 (16) and TWO M6x12 countersunk screws 9062 319 1260 (17). Length 695 mm.
- 200 mm/7.9 in earth auger 4311 680 2020 (18) includes items 3, 14 and 19. Head 4311 680 3010 (19) includes items 17 and 20: TWO M6x12 screws and blade 4311 682 3105 (20). Length 695 mm. Do not flatten head/blade alternatives or treat nested head contents as extra complete heads.
- 150 mm/5.9 in planting auger 4311 680 2515 (21) includes retaining pin 3, split pin 14 and pilot bit 4311 680 3305 (22). Length 525 mm (remark2), NOT 695 mm. Exploded view distinguishes pilot bit from earth-auger heads/blades. All six complete augers on pages 1–2 have pin 3; table supplies pin number 4311 682 3500.
- M6x12 screw MOQ 10 is not fitted quantity: printed 2x. Other rows hereMOQ1. Retained exact BT 106 earth-auger sheet is titled01.1997; used only for component navigation, not to assign1994 introduction or infer a later complete-auger supersession. No drilling performance or physical interchange measured.
- Historical TI 34/1994 guidance only. No successor or unlisted model applicability inferred. No physical interchange test was performed. No hardware operation was performed.
Source: TI 34/1994, p. 1 · TI 34/1994, p. 2 — BT 106: earth and planting augers have distinct blades, inclusion ranges and lengths.
Part numbers (11)
- 4311 680 2012 — 120 mm earth auger; item 13source-listed; scope and inclusion restrictions retained · BT 106: earth and planting augers have distinct blades, inclusion ranges and lengths
- 4311 682 3500 — Retaining pin; item 3source-listed; scope and inclusion restrictions retained · BT 106: earth and planting augers have distinct blades, inclusion ranges and lengths
- 9395 021 2360 — Split pin4.5x40; item 14source-listed; scope and inclusion restrictions retained · BT 106: earth and planting augers have distinct blades, inclusion ranges and lengths
- 4311 680 3008 — 120 mm head; item 15; includes16/17source-listed; scope and inclusion restrictions retained · BT 106: earth and planting augers have distinct blades, inclusion ranges and lengths
- 4311 682 3104 — 120 mm blade; item 16source-listed; scope and inclusion restrictions retained · BT 106: earth and planting augers have distinct blades, inclusion ranges and lengths
- 9062 319 1260 — M6x12 countersunk screw; item 17; twosource-listed; scope and inclusion restrictions retained · BT 106: earth and planting augers have distinct blades, inclusion ranges and lengths
- 4311 680 2020 — 200 mm earth auger; item 18source-listed; scope and inclusion restrictions retained · BT 106: earth and planting augers have distinct blades, inclusion ranges and lengths
- 4311 680 3010 — 200 mm head; item 19; includes17/20source-listed; scope and inclusion restrictions retained · BT 106: earth and planting augers have distinct blades, inclusion ranges and lengths
- 4311 682 3105 — 200 mm blade; item 20source-listed; scope and inclusion restrictions retained · BT 106: earth and planting augers have distinct blades, inclusion ranges and lengths
- 4311 680 2515 — 150 mm planting auger; item 21source-listed; scope and inclusion restrictions retained · BT 106: earth and planting augers have distinct blades, inclusion ranges and lengths
- 4311 680 3305 — Pilot bit; item 22source-listed; scope and inclusion restrictions retained · BT 106: earth and planting augers have distinct blades, inclusion ranges and lengths
Service note · BT 106
BT 106: fit 450 mm shaft extension only after the auger is fully sunk
Remove the extension before withdrawing the auger; never start a hole with the extension fitted.
- Shaft extension 4311 680 2350 is450 mm/18 in. Upper SPLINED SLEEVE is WELDED to shaft and receives drilling spindle; lower end is splined to enter auger. Retaining pin 4311 682 3500 secures it AXIALLY and is included (page 3 items 1/2). No stacking or additional extension length authorized.
- ESSENTIAL USER WARNING: extension MUST NOT BE FITTED until ENTIRE LENGTH OF AUGER IS SUNK IN HOLE. Starting a hole with it fitted places the unit at CHEST HEIGHT and prevents proper control, increasing personal-injury risk. Extension MUST BE REMOVED BEFORE AUGER IS PULLED OUT of hole. Both directions of this sequence are required.
- Page3 summary descriptions are visibly displaced relative to number rows in the original PDF, not merely OCR. Prose, number/key columns and drawing jointly identify extension 4311 680 2350=item 1 and retaining pin 4311 682 3500=item 2. No silent reconstruction from row order alone. Immediate availability is historical, not current stock.
- Historical TI 34/1994 guidance only. No successor or unlisted model applicability inferred. No physical interchange test was performed. No hardware operation was performed.
Source: TI 34/1994, p. 3 — BT 106: fit 450 mm shaft extension only after the auger is fully sunk.
Part numbers (2)
- 4311 680 2350 — 450 mm/18 in shaft extension; item 1included extension hardware · BT 106: fit 450 mm shaft extension only after the auger is fully sunk
- 4311 682 3500 — Retaining pin; item 2included extension hardware · BT 106: fit 450 mm shaft extension only after the auger is fully sunk
Service note · BT 106
BT 106: chuck accepts 2–13 mm twist drills and includes a non-spare key
Chuck 4311 680 4010 includes retaining pin and chuck key; the key has no separate spare number.
- Chuck 4311 680 4010 accepts standard commercial TWIST DRILLS 2–13 mm (5/64–1/2 in). A SPLINED SLEEVE SCREWED INTO CHUCK connects to drilling spindle. No chuck thread size, direction, torque or later-model equivalence supplied.
- Scope of supply: chuck(item 3), retaining pin 4311 682 3500 with FOLDING CLIP(item 2), and CHUCK KEY(item 4). Key is marked -*- and NOT AVAILABLE AS SPARE (remark1); do not invent its number or treat pin2 as key. Summary explicitly says includes 2 and 4, not the shaft extension item 1.
- Original page 3 summary label alignment is displaced. Identification rests on prose, diagram and numbered columns together. MOQ 1 for extension, pin and chuck is ordering data; no spare-key MOQ printed.
- Historical TI 34/1994 guidance only. No successor or unlisted model applicability inferred. No physical interchange test was performed. No hardware operation was performed.
Source: TI 34/1994, p. 3 — BT 106: chuck accepts 2–13 mm twist drills and includes a non-spare key.
Part numbers (2)
- 4311 680 4010 — 2–13 mm chuck; item 3source-listed; scope and inclusion restrictions retained · BT 106: chuck accepts 2–13 mm twist drills and includes a non-spare key
- 4311 682 3500 — Retaining pin with folding clip; item 2source-listed; scope and inclusion restrictions retained · BT 106: chuck accepts 2–13 mm twist drills and includes a non-spare key
Service note · BT 106
BT 106 planting drill: 170 mm deletion and 260 mm introduction
The larger 260 mm version is a product-line replacement, not an identical-size attachment.
- 170 mm (6.7 in) planting hole drill 4311 680 1900 (item 21) is deleted from the line and supplied only while stocks last; its new-version cell is blank/dash. It includes retaining pin item 3 and pilot bit item 22.
- Original pilot bit 4311 680 3300 (item 22) has no new counterpart printed; remark 3 says it remains available as a spare. Deletion of the complete 170 mm drill does NOT delete that pilot-bit spare.
- New 260 mm (10.2 in) planting drill 4404 680 1900 (item 23) has no old counterpart in its row and includes item 3 only. Remark 4 predicts availability from ABOUT JUNE 1997, not a verified release date or serial cutoff. No new pilot-bit number is supplied.
- TI01/1997 names BT 106, series 4311. No serial cutoff is printed; “in progress” is not a machine-number boundary. Historical factory supply statements do not establish current availability. No hardware operation was performed.
- Catalog navigation binds only the matching BT 106 sheets and component numbers. The later IPL’s rounded inch descriptions do not replace the TI’s printed metric/decimal-inch values; no canonical IPL row is changed.
Source: TI 1/1997, p. 1 · TI 1/1997, p. 2 — BT 106 planting drill: 170 mm deletion and 260 mm introduction.
Part numbers (3)
- 4311 680 1900 — 170 mm planting drillold item 21; no new row value · BT 106 planting attachment
- 4311 680 3300 — 170 mm pilot bitold item 22; retained spare · BT 106 planting attachment
- 4404 680 1900 — 260 mm planting drillnew item 23; approximate June 1997 · BT 106 planting attachment
Service note · BT 106
BT 106 support padding: left-hand user side and four straps
Accessory 4311 748 2500 attaches where the operator can support the auger against the thigh.
- Support padding 4311 748 2500 is a SPECIAL ACCESSORY, described as already available for some time; not established as standard equipment or a dated introduction.
- Secure padding to the LEFT-HAND USER SIDE of the handlebar with FOUR “Velcro” strips. Illustration 424TI011 KN depicts the wrapped pad at that side; it is not the brake-lever assembly, a guard, or a dimensioned fabrication template. Operator can support the auger with the thigh against the pad; comfort improvement is the source claim.
- Footer points to TI09/1995 as the last BT 106 bulletin. Its previously accepted brake/conversion notes are retained unchanged; this historical reference does not extend padding fitment to every conversion or other auger.
- TI01/1997 names BT 106, series 4311. No serial cutoff is printed; “in progress” is not a machine-number boundary. Historical factory supply statements do not establish current availability. No hardware operation was performed.
- Catalog navigation binds only the matching BT 106 sheets and component numbers. The later IPL’s rounded inch descriptions do not replace the TI’s printed metric/decimal-inch values; no canonical IPL row is changed.
Source: TI 1/1997, p. 3 — BT 106 support padding: left-hand user side and four straps.
Part numbers (1)
- 4311 748 2500 — Support paddingspecial accessory · BT 106 left-hand user side
Wrong number or missing part for the BT 106? Report a correction →