Stihl 4600 · Section A · 1 of 2 · 39 parts
Cultivator BC 3, 20, 30, 35
Fits BC 3.
Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.
Parts (39)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4600 641 0300 | Gear housing | 1 |
| 1 | 4600 641 0305 | Gear housing | 1 |
| 1 | 4600 641 0302 | Gear housing Fitment / change note → | 1 |
| 2 | 4600 641 4900 | Sleeve | 2 |
| 3 | 4600 642 7800 | Washer | 1 |
| 4 | 9507 003 8052 | Grooved ball bearing 6301-2Z | 1 |
| 5 | 4600 007 1000 | Worm set | 1 |
| 5 | 4600 007 1001 | Worm set | 1 |
| 5 | 4600 007 1002 | Worm set Fitment / change note → | 1 |
| 6 | 4600 642 0600 | Drive shaft | 1 |
| 7 | 9470 435 1370 | Key 5x5x16 | 1 |
| 8 | 4600 642 8700 | Thrust washer | 2 |
| 9 | 9507 003 8053 | Grooved ball bearing 6003-2Z | 2 |
| 10 | 9640 003 1740 | Oil seal 17x35x7 | 2 |
| 11 | 4600 642 7801 | Washer | 2 |
| 12 | 4600 641 0900 | Housing cover | 1 |
| 14 | 9022 341 1050 | Spline screw IS-M5x25 | 5 |
| 15 | 4600 713 1900 | Flange | 2 |
| 16 | 4600 713 4000 | Cultivator blade | 2 |
| 17 | 9022 341 1260 | Spline screw IS-M6x12 | 6 |
| 18 | 4600 713 6600 | Pin | 2 |
| 19 | 9291 021 0180 | Washer 8.4 | 2 |
| 20 | 4119 713 6500 | Screw plug | 1 |
| 21 | 9022 341 0950 | Spline screw IS-M5x10 | 1 |
| 22 | 9022 341 1310 | Spline screw IS-M6x18 | 1 |
| 23 | 9339 003 0150 | Spring clip 1.6 | 2 |
| 24 | 4601 713 4500 | Deflector | 1 |
| 25 | 4140 716 6200 | Hose clamp | 1 |
| 26 | 9022 341 1370 | Spline screw IS-M6x30 | 1 |
| 27 | 9212 260 0900 | Hexagon nut M6 | 1 |
| 28 | 0000 967 3730 | Warning pictogram | 1 |
| 29 | 4600 713 8300 | Sleeve | 2 |
| 30 | 0812 370 1000 | Screwdriver T27x120x70 | 1 |
| 31 | 0781 120 1117 | Gear lubricant 80 g Fitment / change note → option | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4600 710 1502 | Cultivator BC 35 Fitment / change note → | 1 |
| — | 4600 710 1500 | Cultivator BC 30 no longer available from factory | 1 |
| — | 4600 710 1515 | Cultivator BC 3 no longer available from factory | 1 |
| — | 4600 710 1510 | Cultivator BC 20 no longer available from factory | 1 |
| — | 4601 710 8104 | Deflector | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · BC 30 / BC 35
BC 30 / BC 35: separate powerhead combinations and neck diameters
BC35 (25.4 mm): FS 85, FS 120, FS 200. BC30 (26 mm): FS 76, FS 81, FS 86, FS 88, FS 90, FS 96, FS 106, FS 108, FS 160, FS 180.
- BC 35 is derived from BC 30 by reducing the NECK DIAMETER from 26 mm to 25.4 mm. The text describes suitability for brushcutters/clearing saws with a 25.4 mm shaft diameter. This is not an internal-drive-shaft dimension, an instruction to machine a BC 30 neck or proof that diameter alone approves every later machine.
- The Suitable combinations table lists BC 30 with FS 76, FS 81, FS 86, FS 88, FS 90, FS 96, FS 106, FS 108, FS 160 and FS 180. It separately lists BC 35 with FS 85, FS 120 and FS 200. Do not swap the two groups, expand them from a shared catalog series or apply these historical model names to later machines bearing similar names.
- Applications: breaking up PREVIOUSLY TILLED soil; loosening soil around plants; working in soil improvers; trenching and furrowing. The text does not claim a virgin-ground clearing capability. The photo depicts the cultivator/deflector on a shaft but supplies no additional approved powerhead or installation dimensions.
- The TWO cultivator blades may be mounted in THREE DIFFERENT POSITIONS RELATIVE TO ONE ANOTHER to suit soil/operating conditions. The bulletin does not illustrate those three configurations or give their assembly procedure, angular settings or direction changes; none is invented.
- Historical TI 16/1998, not a current compatibility certificate, stock promise or live operating instruction. Shared catalog membership does not extend BC 35 specifications to BC 3, BC 20 or BC 40. No hardware operation was performed.
Source: TI 16/1998, p. 1 — Page1 complete introduction, neck-diameter comparison, both Suitable combinations rows, applications, blade-position statement and photograph.
No additional parts-table entry added.
Historical fitment · BC 35
BC 35: original specifications, new gear parts and accessory
35:1 worm gear; 226 mm blades and 160 mm working width; 2.4 kg includes the deflector but excludes the powerhead.
- Section 1.1: SINGLE-STAGE WORM GEAR, ratio 35:1. STIHL gear lubricant 0781 120 1117 in an 80 g tube or 0781 120 1118 in a 225 g tube. These are package sizes, not specified gearbox fill quantities; no service interval or fill amount is printed.
- Section 1.2: TWO DOUBLE-EDGED rotor blades ROTATE IN THE SAME DIRECTION. Blade diameter 226 mm; working width 160 mm. These different dimensions must not be conflated. Section 1.3: weight 2.4 kg WITHOUT POWERHEAD, WITH DEFLECTOR; not a complete powerhead-plus-attachment weight or an unguarded weight.
- Section 1.4 lists Allen wrench 0812 370 1145, without a printed wrench size. No size or torque is inferred from its order number. Later catalog A sheet shows screwdriver 0812 370 1000 T27x120x70 instead; this is a different tool, not an established replacement for the TI Allen wrench.
- Section 2 lists complete BC 35 cultivator attachment 4600 710 1502; item 1 gearbox housing 4600 641 0302; item 2 worm gear set 4600 007 1002. ALL OTHER PARTS AS BC 30 is limited to that comparison: it does not merge the different housings/worm sets or approve BC 30 mounting combinations for BC 35.
- The retained 4600 A sheet contains the exact BC 35 attachment number, housing 0302 at position 1 and worm set 1002 at position 5; those later drawing positions are NOT the TI summary item numbers 1 and 2. Other housing/worm-set alternatives on the shared sheet are not inferred BC 35 substitutes. The 80 g lubricant 1117 is listed; absence of the 225 g package 1118 does not disprove the historical source.
- Section 3: BC 35 parts list to be incorporated in the existing BC list; next microfiche/CD-ROM issue identified as 2.98. No general printed reprint with BC 35 planned then; a printed list is to be issued later. This is a historical documentation plan, not proof an exact edition is locally present or a date for the hardware introduction. No machine serial cutoff is given.
- Copyright 1998, D1/MTK-na and documentation number 6290 are bibliographic context, not part numbers.
- Historical TI 16/1998, not a current compatibility certificate, stock promise or live operating instruction. Shared catalog membership does not extend BC 35 specifications to BC 3, BC 20 or BC 40. No hardware operation was performed.
Source: TI 16/1998, p. 1 · TI 16/1998, p. 2 — Page1 section1.1; page2 entire sections1.2–1.4, new-spare-parts table, parts-documentation plan and footer.
Part numbers (6)
- 4600 710 1502 — Complete BC35 cultivator attachmentNew attachment · BC35
- 4600 641 0302 — Gearbox housingNew BC35 part; TI item1 · BC35;25.4 mm neck context
- 4600 007 1002 — Worm gear setNew BC35 part; TI item2 · BC35
- 0781 120 1117 — STIHL gear lubricant,80 g tubeLubricant package; not fill quantity · BC35 gear housing
- 0781 120 1118 — STIHL gear lubricant,225 g tubeLubricant package; not fill quantity · BC35 gear housing
- 0812 370 1145 — Allen wrenchAccessory; size not printed · BC35
Wrong number or missing part for the BC 3? Report a correction →