Stihl 4719 · Section A · 1 of 7 · 34 parts
Electric motor
Fits RE 102 KM, RE 104 KM, RE 106 KM.
Historical fitment & changes (4) — includes parts and conditions not shown on this drawing.
Parts (34)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4719 600 0209 | Electric motor 230 V/50 Hz | 1 |
| 1 | 4719 600 0211 | Electric motor 240 V/50 Hz | 1 |
| 2 | 4719 600 0203 | Electric motor 230 V/50 Hz | 1 |
| 2 | 4719 600 0201 | Electric motor 240V /50 Hz | 1 |
| 3 | 9503 003 5330 | Grooved ball bearing 6003-2RS | 1 |
| 4 | 4719 609 0100 | Gasket | 2 |
| 5 | 4719 602 1100 | Bearing cover Fitment / change note → | 1 |
| 6 | 4719 602 1105 | Bearing cover Fitment / change note → | 1 |
| 7 | 4719 607 3005 | Fanwheel Fitment / change note → no longer available from factory | 1 |
| 8 | 9320 630 0120 | Spring washer 5 Fitment / change note → | 1 |
| 9 | 9045 371 0960 | Socket head screw M5x12 Fitment / change note → | 1 |
| 10 | 4719 606 0105 | Fan shroud Fitment / change note → | 1 |
| 11 | 4719 609 0110 | Gasket | 1 |
| 12 | 4719 432 1000 | Switchbox Fitment / change note → | 1 |
| 13 | 4719 432 1004 | Switchbox Fitment / change note → | 1 |
| 14 | 0751 030 7187 | Cable gland | 1 |
| 15 | 9041 319 0660 | Pan head screw M4x12 | 1 |
| 16 | 4719 430 8600 | Collar screw | 1 |
| 17 | 4719 431 2900 | Terminal block | 1 |
| 18 | 9103 021 1800 | Self-tapping screw 2.9x13 | 1 |
| 19 | 4713 430 0500 | Switch | 1 |
| 20 | 4719 439 0600 | Sealing cap | 1 |
| 21 | 4719 432 1100 | Clamping frame no longer available from factory | 1 |
| 22 | 9103 021 1830 | Self-tapping screw 2.9x16 | 2 |
| 23 | 4719 432 9300 | Grommet | 1 |
| 24 | 4719 439 0500 | Gasket | 1 |
| 25 | 4719 432 0600 | Cover | 1 |
| 26 | 9104 003 0670 | Self-tapping screw P4x14 | 4 |
| 27 | 4719 605 1000 | Capacitor | 1 |
| 28 | 4719 605 1015 | Capacitor | 1 |
| 29 | 4719 608 9200 | Cable tie | 1 |
| 30 | 4719 440 2000 | Connecting cable Europe | 1 |
| 31 | 4719 440 2001 | Connecting cable GB, IRL, MAL | 1 |
| 32 | 4719 440 2004 | Connecting cable AUS, NZ | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · RE 102 KM / RE 104 KM
RE 102 / 104 KM: model-specific stator and rotor changes
The shared original stator and rotor numbers do not make the RE 106 KM replacements equivalent.
- 230 V / 50 Hz stator item 1: RE 102/104 K 4719 600 0500 → RE 102/104 KM 4719 600 0505. Rotor item 2: RE 102/104 K 4719 600 1110 → RE 102/104 KM 4719 600 1120. Each new row MOQ 1. Both original rows carry remark 1 (older-machine supply). No other voltage/frequency equivalence inferred.
- Exact-model motor-sheet navigation is not proof that later 2012 service numbers equal these 1994 numbers. No independent coil/rotor mixing permission or electrical rewiring procedure is supplied.
- Historical TI 36/1994 guidance only. No serial cutoff, retrofit kit or blanket K-to-KM interchange is specified. Remark 1 means the original part remains available for OLDER MACHINES, not that old and new configurations are freely interchangeable. Supply statements are historical, not current stock. No physical interchange test was performed. No hardware operation was performed.
Source: TI 36/1994, p. 2 · TI 36/1994, p. 3 · TI 36/1994, p. 4 — RE 102 / 104 KM: model-specific stator and rotor changes.
Part numbers (4)
- 4719 600 0500 — RE 102/104 stator 230 V/50 Hz; item 1; originalold; retained for older machines · RE 102 / 104 KM: model-specific stator and rotor changes
- 4719 600 0505 — RE 102/104 stator 230 V/50 Hz; item 1; newnew · RE 102 / 104 KM: model-specific stator and rotor changes
- 4719 600 1110 — RE 102/104 rotor; item 2; originalold; retained for older machines · RE 102 / 104 KM: model-specific stator and rotor changes
- 4719 600 1120 — RE 102/104 rotor; item 2; newnew · RE 102 / 104 KM: model-specific stator and rotor changes
Service note · RE 106 KM
RE 106 KM: longer motor requires 106 mm bolts
RE 106 KM has its own stator, rotor, bearing cover and switch housing.
- RE 106 K → RE 106 KM: stator 230 V/50 Hz (1) 4719 600 0500 → 4719 600 0508; rotor (2) 4719 600 1110 → 4719 600 1121; bearing cover (3) 4719 602 1100 → 4719 602 1105; switch housing (8) 4719 432 1000 → 4719 432 1004. All old rows remark 1; all new rows MOQ 1.
- Longer RE 106 KM motor changes hexagon bolt (10) M5x96, 9008 319 1065, to M5x106, 9008 319 1175. Original remains for older machines; new MOQ 1 is NOT the number of bolts fitted. Do not generalize the longer bolt or RE 106-specific housing/cover to RE 102/104 KM. No tightening torque supplied.
- Historical TI 36/1994 guidance only. No serial cutoff, retrofit kit or blanket K-to-KM interchange is specified. Remark 1 means the original part remains available for OLDER MACHINES, not that old and new configurations are freely interchangeable. Supply statements are historical, not current stock. No physical interchange test was performed. No hardware operation was performed.
Source: TI 36/1994, p. 1 · TI 36/1994, p. 2 · TI 36/1994, p. 3 · TI 36/1994, p. 4 — RE 106 KM: longer motor requires 106 mm bolts.
Part numbers (10)
- 4719 600 0500 — RE 106 stator 230 V/50 Hz; item 1; originalold; retained for older machines · RE 106 KM: longer motor requires 106 mm bolts
- 4719 600 0508 — RE 106 stator 230 V/50 Hz; item 1; newnew · RE 106 KM: longer motor requires 106 mm bolts
- 4719 600 1110 — RE 106 rotor; item 2; originalold; retained for older machines · RE 106 KM: longer motor requires 106 mm bolts
- 4719 600 1121 — RE 106 rotor; item 2; newnew · RE 106 KM: longer motor requires 106 mm bolts
- 4719 602 1100 — RE 106 bearing cover; item 3; originalold; retained for older machines · RE 106 KM: longer motor requires 106 mm bolts
- 4719 602 1105 — RE 106 bearing cover; item 3; newnew · RE 106 KM: longer motor requires 106 mm bolts
- 4719 432 1000 — RE 106 switch housing; item 8; originalold; retained for older machines · RE 106 KM: longer motor requires 106 mm bolts
- 4719 432 1004 — RE 106 switch housing; item 8; newnew · RE 106 KM: longer motor requires 106 mm bolts
- 9008 319 1065 — RE 106 K M5x96 bolt; item 10old; retained for older machines · RE 106 KM: longer motor requires 106 mm bolts
- 9008 319 1175 — RE 106 KM M5x106 bolt; item 10new · RE 106 KM: longer motor requires 106 mm bolts
Service note · RE 102 KM / RE 104 KM / RE 106 KM
RE KM: changed fan, shroud and retaining hardware
The exploded view places the A5 lock washer with the M5x12 fan screw.
- Fan wheel (4) 4719 607 3000 → 4719 607 3005; fan shroud (7) 4719 606 0100 → 4719 606 0105. Both original rows remark 1, new MOQ 1. Added lock washer A5 (5) 9320 630 0120 MOQ 1 and socket-head screw M5x12 (6) 9045 371 0960 MOQ 10.
- Page 2 exploded view shows the screw and washer on the fan axis. MOQ 10 is an ORDER quantity, not ten fitted screws. No torque, fan diameter or permission to omit retention is supplied.
- Historical TI 36/1994 guidance only. No serial cutoff, retrofit kit or blanket K-to-KM interchange is specified. Remark 1 means the original part remains available for OLDER MACHINES, not that old and new configurations are freely interchangeable. Supply statements are historical, not current stock. No physical interchange test was performed. No hardware operation was performed.
Source: TI 36/1994, p. 2 · TI 36/1994, p. 3 · TI 36/1994, p. 4 — RE KM: changed fan, shroud and retaining hardware.
Part numbers (6)
- 4719 607 3000 — Fan wheel; item 4; originalold; retained for older machines · RE KM: changed fan, shroud and retaining hardware
- 4719 607 3005 — Fan wheel; item 4; newnew · RE KM: changed fan, shroud and retaining hardware
- 4719 606 0100 — Fan shroud; item 7; originalold; retained for older machines · RE KM: changed fan, shroud and retaining hardware
- 4719 606 0105 — Fan shroud; item 7; newnew · RE KM: changed fan, shroud and retaining hardware
- 9320 630 0120 — A5 lock washer; item 5new hardware · RE KM: changed fan, shroud and retaining hardware
- 9045 371 0960 — M5x12 socket-head screw; item 6new hardware · RE KM: changed fan, shroud and retaining hardware
Service note · RE 102 KM / RE 104 KM / RE 106 KM
RE 102 / 104 / 106 KM: automatic-cutout wiring and diagram-local labels
Electrical B2 is the microswitch; hydraulic S1 must not be confused with electrical S1.
- Electrical diagram607TI018 labels B1=thermal protector, B2=microswitch, C1=capacitor, M1=motor, S1=main switch, X1=terminal strip. Circled1/2/3/4 wire colours are RED/BLACK/WHITE/CLEAR respectively. Hydraulic figures use S1 for the microswitch instead: labels are local to their diagram.
- X1 terminals are L1, N, 1 and2; C1 bridges1 and2. S1 contacts4–5 lie in the L1 branch, with B2 below; contacts1–2 lie in the N branch. Red circled1 is the switched L1/B2 motor feed, black circled2 the switched N branch through B1, white circled3 connects X1/1 to the red-side motor node, and clear circled4 connects X1/2 to the other motor winding. The lower winding ends join the black/B1-side common. PE connects separately to the indicated motor/enclosure earth, not to a numbered colour circuit.
- Circled wire identifiers are NOT X1 terminal numbers. No wire gauge, capacitor rating, motor winding resistance or live-test procedure is supplied. Use the original diagram for topology; no connection was made or verified. Footer TI36/1994 is last-information bibliography, not a substitute for the explicitly delegated service instructions.
- Historical TI15/1996 evidence only. From January 1996; page7 separately prints “Modification to be introduced from machine no. 31 168 816”. Neither statement is a universal model-identification range or proof of retrofit compatibility. RE 102 K is only for some markets; no extension to RE 104 K / RE 106 K or later models. No hardware operation was performed.
Source: TI 15/1996, p. 1 · TI 15/1996, p. 7 · TI 15/1996, p. 9 — RE 102 / 104 / 106 KM: automatic-cutout wiring and diagram-local labels.
No additional parts-table entry added.
Wrong number or missing part for the RE 102 KM, RE 104 KM, RE 106 KM? Report a correction →