Stihl 4719 · Section B · 2 of 7 · 29 parts
Pump
Fits RE 102 KM, RE 104 KM, RE 106 KM.
Historical fitment & changes (4) — includes parts and conditions not shown on this drawing.
Parts (29)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4719 760 1400 | Drive housing | 1 |
| 2 | 4719 609 0100 | Gasket | 1 |
| 3 | 9630 003 1745 | Oil seal 17x28x7 | 1 |
| 4 | 9504 003 0706 | Angular contact ball bearing 7303B | 1 |
| 5 | 9514 003 6953 | Needle cage AXK4060 | 1 |
| 6 | 9645 945 8588 | O-ring 80.6x2.62 | 1 |
| 7 | 4719 701 0500 | Pump housing | 1 |
| 8 | 9146 794 7880 | Screw plug 1/4" | 2 |
| 9 | 4719 700 2300 | Screw plug | 1 |
| 10 | 9645 945 1075 | O-ring 11.2x1.8 | 1 |
| 11 | 4719 708 3300 | Spring | 3 |
| 12 | 4719 708 3601 | Lockwasher | 3 |
| 13 | 4719 709 2005 | Sealing ring | 3 |
| 14 | 4719 701 3100 | Piston | 3 |
| 15 | 4719 701 3000 | Swash plate 10° Fitment / change note → no longer available from factory | 1 |
| 16 | 4719 701 3008 | Swash plate 8°30' Fitment / change note → | 1 |
| 17 | 4719 701 3010 | Swash plate 9° Fitment / change note → | 1 |
| 18 | 4719 701 3105 | Piston Fitment / change note → | 1 |
| 19 | 4719 708 5700 | Bushing | 3 |
| 20 | 9645 945 7704 | O-ring 23.82x1.78 | 3 |
| 21 | 9045 319 1350 | Socket head screw M6x25 | 3 |
| 22 | 9008 319 1065 | Hexagon head screw M5x96 | 3 |
| 23 | 9008 319 1175 | Hexagon head screw M5x106 | 3 |
| 24 | 9210 261 0700 | Hexagon nut M5 | 3 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4719 700 5600 | Pump 230 V/50 Hz no longer available from factory | 1 |
| — | 4719 700 5605 | Pump 230/240 V/50 Hz | 1 |
| — | 4719 700 5611 | Pump 230-240 V/50 Hz | 1 |
| — | 4719 700 5612 | Pump 230-240 V/50 Hz Fitment / change note → | 1 |
| — | 4719 007 1050 | Set of gaskets option | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · RE 102 KM
RE 102 KM: 8°30′ swash plate replaces the K version’s 10° plate
Match the plate angle and part number to the exact model; numbers recur across different models.
- Item 9: RE 102 K 10°, 4719 701 3000 → RE 102 KM 8°30′, 4719 701 3008. New MOQ 1; original remark 1. These are separate model-specific rows, NOT one global supersession chain. The 10° 4719 701 3000 is old RE 102 K but new RE 104 KM; the 9° 4719 701 3010 is old RE 104 K but new RE 106 KM. No plate-only conversion or changed operating-pressure permission is stated.
- Historical TI 36/1994 guidance only. No serial cutoff, retrofit kit or blanket K-to-KM interchange is specified. Remark 1 means the original part remains available for OLDER MACHINES, not that old and new configurations are freely interchangeable. Supply statements are historical, not current stock. No physical interchange test was performed. No hardware operation was performed.
Source: TI 36/1994, p. 2 · TI 36/1994, p. 3 · TI 36/1994, p. 4 — RE 102 KM: 8°30′ swash plate replaces the K version’s 10° plate.
Part numbers (2)
- 4719 701 3000 — RE 102 swash plate; item 9; originalold; retained for older machines · RE 102 KM: 8°30′ swash plate replaces the K version’s 10° plate
- 4719 701 3008 — RE 102 swash plate; item 9; newnew · RE 102 KM: 8°30′ swash plate replaces the K version’s 10° plate
Service note · RE 104 KM
RE 104 KM: 10° swash plate replaces the K version’s 9° plate
Match the plate angle and part number to the exact model; numbers recur across different models.
- Item 9: RE 104 K 9°, 4719 701 3010 → RE 104 KM 10°, 4719 701 3000. New MOQ 1; original remark 1. These are separate model-specific rows, NOT one global supersession chain. The 10° 4719 701 3000 is old RE 102 K but new RE 104 KM; the 9° 4719 701 3010 is old RE 104 K but new RE 106 KM. No plate-only conversion or changed operating-pressure permission is stated.
- Historical TI 36/1994 guidance only. No serial cutoff, retrofit kit or blanket K-to-KM interchange is specified. Remark 1 means the original part remains available for OLDER MACHINES, not that old and new configurations are freely interchangeable. Supply statements are historical, not current stock. No physical interchange test was performed. No hardware operation was performed.
Source: TI 36/1994, p. 2 · TI 36/1994, p. 3 · TI 36/1994, p. 4 — RE 104 KM: 10° swash plate replaces the K version’s 9° plate.
Part numbers (2)
- 4719 701 3010 — RE 104 swash plate; item 9; originalold; retained for older machines · RE 104 KM: 10° swash plate replaces the K version’s 9° plate
- 4719 701 3000 — RE 104 swash plate; item 9; newnew · RE 104 KM: 10° swash plate replaces the K version’s 9° plate
Service note · RE 106 KM
RE 106 KM: 9° swash plate replaces the K version’s 7°30′ plate
Match the plate angle and part number to the exact model; numbers recur across different models.
- Item 9: RE 106 K 7°30′, 4719 701 3020 → RE 106 KM 9°, 4719 701 3010. New MOQ 1; original remark 1. These are separate model-specific rows, NOT one global supersession chain. The 10° 4719 701 3000 is old RE 102 K but new RE 104 KM; the 9° 4719 701 3010 is old RE 104 K but new RE 106 KM. No plate-only conversion or changed operating-pressure permission is stated.
- Historical TI 36/1994 guidance only. No serial cutoff, retrofit kit or blanket K-to-KM interchange is specified. Remark 1 means the original part remains available for OLDER MACHINES, not that old and new configurations are freely interchangeable. Supply statements are historical, not current stock. No physical interchange test was performed. No hardware operation was performed.
Source: TI 36/1994, p. 2 · TI 36/1994, p. 3 · TI 36/1994, p. 4 — RE 106 KM: 9° swash plate replaces the K version’s 7°30′ plate.
Part numbers (2)
- 4719 701 3020 — RE 106 swash plate; item 9; originalold; retained for older machines · RE 106 KM: 9° swash plate replaces the K version’s 7°30′ plate
- 4719 701 3010 — RE 106 swash plate; item 9; newnew · RE 106 KM: 9° swash plate replaces the K version’s 7°30′ plate
Service note · RE 106 KM
RE 106 KM France: ceramic-coated pistons and listed pump
France-only pump5612 and piston3105; coating is not a solid-ceramic construction claim.
- For France, previously stainless-steel pistons are replaced by CERAMIC-COATED pistons (page1). Page7 lists pump4719 700 5612 and “Piston (ceramic)”4719 701 3105 specifically for RE106KM France. The shorter table label does not establish a solid-ceramic piston.
- The cover contents mention “France only: RE106KM, safety control block”, whereas the body/table identify pump/pistons. This scope wording difference is preserved; no France-only control-block part is invented. Shared IPL pump listings do not extend this regional change to other models or markets.
- The machine-number statement31 168 816 is printed BELOW the complete new-parts table; it is not explicitly labelled a France-only piston cutoff. Retain its page-level context without inventing independent cutoffs for each component.
- Historical TI15/1996 evidence only. From January 1996; page7 separately prints “Modification to be introduced from machine no. 31 168 816”. Neither statement is a universal model-identification range or proof of retrofit compatibility. RE 102 K is only for some markets; no extension to RE 104 K / RE 106 K or later models. No hardware operation was performed.
Source: TI 15/1996, p. 1 · TI 15/1996, p. 7 — RE 106 KM France: ceramic-coated pistons and listed pump.
Part numbers (2)
- 4719 700 5612 — PumpTI15/1996 listed configuration · RE 106 KM France only
- 4719 701 3105 — Ceramic-coated piston (table: ceramic)TI15/1996 listed configuration · RE 106 KM France only
Wrong number or missing part for the RE 102 KM, RE 104 KM, RE 106 KM? Report a correction →