← RE 102 KM, RE 104 KM, RE 106 KM · RE 102 K, RE 104 K, RE 106 K

Stihl 4719 · Section E · 4 of 7 · 29 parts

Shroud

Fits RE 102 KM, RE 104 KM, RE 106 KM.

Parts diagrams →

Historical fitment & changes (3) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111213131415161718192202122232425334404156789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (29)

PosPart numberDescriptionQty
1 4719 706 2110 Machine cover, lower 1
2 4719 708 2800 Buffer 1
3 9041 216 0950 Pan head screw M5x10 8
4 4719 706 2102 Machine cover, top Fitment / change note → 1
5 4719 706 2104 Machine cover, top Fitment / change note → 1
6 4719 706 2106 Machine cover, top Fitment / change note → 1
7 4719 791 7605 Support Fitment / change note → no longer available from factory 1
8 9307 021 0120 Washer 5.3 2
9 9104 003 8779 Self-tapping screw P5x25 2
10 9104 003 9944 Self-tapping screw P4x30 Fitment / change note → 4
11 4719 791 5700 Carrying handle 1
12 4915 500 3005 Washing brush 1
13 9645 945 7472 O-ring 7.5x2.65 1
14 4915 500 1405 Injector no longer available from factory 1
15 4915 507 0100 Detergent bottle 1
16 4915 502 0800 Cleaning pin 1
17 9645 945 7542 O-ring 12.5x1.8 1
18 4719 701 2901 Intake fitting no longer available from factory 1
19 9045 319 1020 Socket head screw M5x20 2
20 4719 502 2101 Strainer 1
21 4719 700 7300 Hose connector 1
22 not sold separately Gasket not available as a separate item 1
23 not sold separately O-ring not available as a separate item 1
24 4719 708 2100 Plug Fitment / change note → 1
25 9103 021 3810 Self-tapping screw 4.8x25 2
40 4915 500 3000 Washing brush 1
41 9645 945 7501 O-ring 9.3x2.4 1
Not numbered on the diagram — assemblies, kits and options
— 4719 007 1053 Set of gaskets for hose connector option 1
— 4719 007 1050 Set of gaskets option 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · RE 102 KM / RE 104 KM / RE 106 KM

RE 102 / 104 / 106 KM: mobile versions and changed specifications

M means mobile; operating pressures are unchanged while RE 104 KM and RE 106 KM gain power and water throughput.

  • Under-carriage added to RE 102 K, RE 104 K and RE 106 K; names become RE 102 KM, RE 104 KM and RE 106 KM (type 4719). This is a production evolution, not a documented owner retrofit procedure. Photograph shows the horizontal mobile cleaner, cart and spray equipment; it does not define extra supplied accessories.
  • RE 102 KM: operating pressure 10–90 bar (unchanged); power 1.7 kW (original 1.7); maximum throughput 540 l/h (original 540); approximate weight 14.4 kg (original 12.3). RE 104 KM: 10–100 bar unchanged; 1.9 kW (1.7); 500 l/h (450); 14.4 kg (12.3). RE 106 KM: 10–120 bar unchanged; 2.25 kW (1.7); 500 l/h (400); 15.4 kg (13.5). Do not apply the prose 500 l/h to RE 102 KM.
  • All three: approximate length 860 mm (original 355), width 305 mm (205), height 305 mm (225). Parentheses are ORIGINAL-version values, not tolerances or alternate specifications. Remaining specifications stated unchanged with references TI 34.92 and/or 49.91; this note does not invent omitted values or constitute whole-manual acceptance.
  • Historical TI 36/1994 guidance only. No serial cutoff, retrofit kit or blanket K-to-KM interchange is specified. Remark 1 means the original part remains available for OLDER MACHINES, not that old and new configurations are freely interchangeable. Supply statements are historical, not current stock. No physical interchange test was performed. No hardware operation was performed.

Source: TI 36/1994, p. 1 — RE 102 / 104 / 106 KM: mobile versions and changed specifications.

No additional parts-table entry added.

Service note · RE 102 KM / RE 104 KM / RE 106 KM

RE KM: upper shrouds differ by model

The common old shroud is replaced by three distinct KM shrouds, with left/right supports.

  • Original upper shroud 4719 706 2100 remains for older machines. Item 15 new: RE 102 KM 4719 706 2102; RE 104 KM 4719 706 2104; RE 106 KM 4719 706 2106. These are NOT interchangeable model labels. Added left support (16) 4719 791 7600 and right support (17) 4719 791 7605 are distinct.
  • PT 4x30 self-tapping screw (18) 9093 021 2810 → 9104 003 9944; original remark 1. All new rows here MOQ 1; this is not a complete fitted-screw count. Page 2 shows support and upper/lower shroud positioning; no new lower-shroud number is printed.
  • Historical TI 36/1994 guidance only. No serial cutoff, retrofit kit or blanket K-to-KM interchange is specified. Remark 1 means the original part remains available for OLDER MACHINES, not that old and new configurations are freely interchangeable. Supply statements are historical, not current stock. No physical interchange test was performed. No hardware operation was performed.

Source: TI 36/1994, p. 2 · TI 36/1994, p. 3 · TI 36/1994, p. 4 — RE KM: upper shrouds differ by model.

Part numbers (8)
  • 4719 706 2100 — Original common upper shroudold; retained for older machines · RE KM: upper shrouds differ by model
  • 4719 706 2102 — RE 102 KM upper shroud; item 15new; exact model · RE KM: upper shrouds differ by model
  • 4719 706 2104 — RE 104 KM upper shroud; item 15new; exact model · RE KM: upper shrouds differ by model
  • 4719 706 2106 — RE 106 KM upper shroud; item 15new; exact model · RE KM: upper shrouds differ by model
  • 4719 791 7600 — Left support; item 16new · RE KM: upper shrouds differ by model
  • 4719 791 7605 — Right support; item 17new · RE KM: upper shrouds differ by model
  • 9093 021 2810 — PT 4x30 self-tapping screw; item 18; originalold; retained for older machines · RE KM: upper shrouds differ by model
  • 9104 003 9944 — PT 4x30 self-tapping screw; item 18; newnew · RE KM: upper shrouds differ by model

Service note · RE 102 KM / RE 104 KM / RE 106 KM

RE 102 / 104 / 106 KM: cover opening retained and plugged

4719 708 2100 closes the deleted pressure-knob opening.

  • Removal of pressure-control knob leaves an opening in the cover. Plug4719 708 2100 closes it; the cover RETAINS THE OPENING for interchangeability. The arrow in607TI019 locates that opening. No instruction to drill/remove a cover feature or complete-cleaner retrofit approval is given.
  • Historical TI15/1996 evidence only. From January 1996; page7 separately prints “Modification to be introduced from machine no. 31 168 816”. Neither statement is a universal model-identification range or proof of retrofit compatibility. RE 102 K is only for some markets; no extension to RE 104 K / RE 106 K or later models. No hardware operation was performed.

Source: TI 15/1996, p. 1 · TI 15/1996, p. 5 · TI 15/1996, p. 6 · TI 15/1996, p. 7 — RE 102 / 104 / 106 KM: cover opening retained and plugged.

Part numbers (1)
  • 4719 708 2100 — Cover plugTI15/1996 listed configuration · Only the stated models and configuration

Wrong number or missing part for the RE 102 KM, RE 104 KM, RE 106 KM? Report a correction →