Stihl 4804 · Section E · 5 of 5 · 8 parts
Extras: Vacuum attachment
Fits BE 55, BGE 60.
Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.
Parts (8)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4807 760 3501 | Suction tube | 1 |
| 2 | 0000 967 3631 | Warning pictogram BG | 1 |
| 3 | 4807 708 6900 | Elbow | 1 |
| 4 | 4227 700 7102 | Hose clip | 1 |
| 5 | 4227 701 5000 | Screw | 1 |
| 6 | 4229 708 9702 | Catcher bag | 1 |
| 7 | 4227 710 9003 | Harness | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4807 007 1000 | Vacuum attachment option | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · BE 55
BE 55: airflow and noise figures retain their measurement context
595 m³/h maximum airflow; vacuum attachment 535 m³/h at 9,500 rpm; noise values are not interchangeable.
- Maximum airflow is 595 m³/h (350 Cfm); airflow with vacuum attachment is 535 m³/h (315 Cfm) at 9,500 rpm. Air velocity is 59 m/s (132 mph). These are printed performance figures, not bench measurements; the airflow-speed label does not replace the separately specified 9,400 rpm rated motor speed.
- Equivalent sound pressure to ISO 6081 is 85 dB(A) in BOTH blowing and vacuum modes. Equivalent sound power to ISO 3744 is 97 dB(A) blowing and 100 dB(A) vacuum. Preserve pressure versus power and operating mode.
- Page 1 separately states a bystander sound level below 65 dB(A) at 50 ft. That distance-specific claim is not the ISO 6081 pressure row, sound power, or proof of safe unprotected exposure. No new noise test or conversion was performed.
- Historical English TI 04/1994, series 4804 BE 55 only. Shared BE 55/BGE 60 catalog grouping does not extend these assertions to BGE 60, other voltages or later variants. No physical interchange test was performed.
Source: TI 4/1994, p. 1 · TI 4/1994, p. 2 — airflow and noise figures retain their measurement context.
No additional parts-table entry added.
Service note · BE 55
BE 55: vacuum attachment and four identified spare parts
Attachment 4804 007 1000; catcher bag, harness, manifold and suction tube have separate numbers.
- The special accessory is vacuum attachment 4804 007 1000. The original drawing and parts table identify item 1 catcher bag 4227 708 9700, item 2 harness 4227 710 9000, item 3 manifold 4804 708 6900 and item 4 suction tube 4804 708 3500.
- The diagram shows the bag and harness, curved manifold at the outlet and separate suction tube at the intake. These callouts are not a complete fitting procedure, a safety-interlock bypass instruction or a universal attachment interface.
- The spare table PG and MOQ H/V columns are historical commercial metadata, not per-machine installation quantities. In particular the harness MOQ V of 10 does not mean ten harnesses per attachment. No replacement/supersession or fitment to BGE 60 is stated.
- Historical English TI 04/1994, series 4804 BE 55 only. Shared BE 55/BGE 60 catalog grouping does not extend these assertions to BGE 60, other voltages or later variants. No physical interchange test was performed.
Source: TI 4/1994, p. 3 — vacuum attachment and four identified spare parts.
Part numbers (5)
- 4804 007 1000 — Vacuum attachmentaccessory · BE 55 — vacuum attachment and four identified spare parts
- 4227 708 9700 — Catcher bag, item 1spare · BE 55 — vacuum attachment and four identified spare parts
- 4227 710 9000 — Harness, item 2spare · BE 55 — vacuum attachment and four identified spare parts
- 4804 708 6900 — Manifold, item 3spare · BE 55 — vacuum attachment and four identified spare parts
- 4804 708 3500 — Suction tube, item 4spare · BE 55 — vacuum attachment and four identified spare parts
Wrong number or missing part for the BE 55, BGE 60? Report a correction →