← 038 family · MS 380/381/382

Stihl model · engine series 1119

038 Magnum II 72.2 cc

Chain
3/8″ · .050–.063″
Recommended bar
16–25″
Mount
3003 / D025

038 Magnum II chain size: 3/8″ · .050–.063″, 3003-mount bar. Typical STIHL drive-link counts for 3/8" (full) chain: 16″ = 60, 18″ = 66, 20″ = 72, 22″ = 76, 25″ = 84. Count the links on your old chain or read the bar stamp before ordering.

Model displacement · family chain/bar fitment. Details & confidence ↓

440 parts entries · catalogue coverage: 038. Check the sheet’s variant and serial notes.

Diagram sections

Model & family fitment specs

Actual displacement72.2 cc
Guide bar16–25″
Chain3/8″ · .050–.063″
Bar mount3003 / D025

Displacement is specific to the 038 Magnum II roster record. Chain, bar and mount are the published family fitment for engine series 1119; confirm the pitch, gauge and drive-link count stamped on your installed bar before ordering.

displacement · sourcedbar real-world · estimatedbar mount · sourcedchain · sourceddates · sourcedvariants · sourced

Chain, bar and mount: family research from STIHL product pages, parts catalogues and collector records. Checked Jul 2026. How we check fitment

Chains & bars that fit the 038 Magnum II

Pitch & gauge 3/8″ · .050–.063″ · recommended bar 16–25″ · bar mount 3003 / D025 · round file 7/32" (5.5 mm) for Oregon; STIHL lists 13/64" (5.2 mm)

Chain & bar by length

BarDrive linksShop
16″ 60 DL Chain .050″ →Chain .063″ → Bar · 3003 →
18″ 66 DL Chain .050″ →Chain .063″ → Bar · 3003 →
20″ 72 DL Chain .050″ →Chain .063″ → Bar · 3003 →
22″ 76 DL Chain .050″ →Chain .063″ → Bar · 3003 →
25″ 84 DL Chain .050″ →Chain .063″ → Bar · 3003 →

Drive-link counts come from STIHL's saw-chain selection chart and depend on the bar mount as well as length. Pick the chain link that matches the gauge stamped on your bar. Bar searches include mount 3003 / D025; still confirm the mount stamp, pitch, gauge and drive-link count on your installed bar before ordering.

Drive-link counts: STIHL 2025 US catalog, saw chain selection, pp. 166-167; Oregon chain fit guide, STIHL section. Checked Nov 2026. How we check fitment

Files, oil & sharpening

Suggested match: Oregon 72 (.050″) / 73 (.058″) / 75 (.063″) series, e.g. 72/75 EXL. Match the gauge and confirm the drive-link count for your exact bar before ordering. These are equivalent aftermarket (Oregon) chains, not genuine STIHL chain — STIHL sells its own chain through its dealer network, and we're not affiliated with STIHL. New to fitment? See the bar-mount identification guide and chain & cutter guide.

Some links earn us a commission. It never changes the specs or what we recommend.

Service & tuning

Factory tuning settings

Max speed12,500 rpm
L screw (low speed)1 turn
H screw (high speed)1 turn
LA screw (idle stop)3/4 turn
Confidencereconstructed

Screw figures are turns open from lightly seated. These are the figures every model in this family shares; an individual model page may be more specific. Matched on the base model number rather than this exact variant, so treat it as a starting point. Set the final mixture by ear and tachometer against the machine in front of you — running a two-stroke lean to hit a published number is how pistons get scored.

About the 038 Magnum II

ProductionWithin 1985–97
MarketAmericas / export markets
RarityUnrated
Engine family1119
Family era1980→now

72.2 cc (52 mm); same engine class as the Magnum, with documented regional production including Brazil. Magnum II is not defined by port count alone.

Production, market and rarity are specific to this model’s roster record.

Shared engine-family membership does not establish parts interchangeability.

Data confidence

Chain, bar, mount and displacement confidence comes from the shared 038 family · MS 380/381/382 family research.

displacement · sourcedbar real-world · estimatedbar mount · sourcedchain · sourceddates · sourcedvariants · sourced

Something wrong or missing for the 038 Magnum II? Report a correction →