Stihl 1111 · Section B · 2 of 14 · 23 parts
Cylinder, Muffler
Fits 050, 051.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (23)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1111 029 2300 | Cylinder gasket | 1 |
| 2 | 1111 020 1200 | Cylinder with piston Ø 52 mm Fitment / change note → — 89.0 cc | 1 |
| 3 | 1111 030 2000 | Piston Ø 52 mm — 89.0 cc | 1 |
| 4 | 1115 034 3010 | Piston ring Ø 52x1.5 mm — 89.0 cc | 2 |
| 5 | 1111 034 1501 | Piston pin 13x8x39 | 1 |
| 6 | 9462 650 1300 | Snap ring 13 | 2 |
| 7 | 1111 025 2200 | Plug Fitment / change note → | 1 |
| 8 | 1111 020 9400 | Decompression valve Fitment / change note → option | 1 |
| 9 | 9636 003 0420 | Sealing ring 6.5x9.5 Fitment / change note → | 1 |
| 10 | 9036 371 1020 | Socket head screw M5x20 | 4 |
| 11 | 1111 149 0600 | Muffler gasket | 1 |
| 12 | 1111 140 0613 | Muffler | 1 |
| 13 | 1111 140 0609 | Muffler | 1 |
| 14 | 1111 141 9005 NLA | Screen | 1 |
| 15 | 9099 021 0810 | Self-tapping screw 4.2x9.5 | 1 |
| 16 | 9022 341 1010 | Spline screw IS-M5x18 | 2 |
| 17 | 1110 400 7005 | Spark plug Bosch WSR 6 F | 1 |
| 17 | 0000 400 7000 | Spark plug NGK BPMR7A | 1 |
| 18 | 0000 998 0603 | Torsion spring → replaced by 0000 998 0604 TI 30/1995 | 1 |
| 19 | 1106 405 1000 | Spark plug boot → replaced by 1128 405 1000, 1128 405 1000 TI 30/1995 | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1111 140 0650 | Muffler | 1 |
| — | 1111 007 1050 | Set of gaskets | 1 |
| — | 1111 007 1052 | Set of gaskets | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Historical fitment · TS 510 / 051
TS 510 / 051: unchanged cylinder number and decompression port
Cylinder 1111 020 1200 retains its number; its plugged port supports older TS 510 and 051 use.
- Section 4 and drawing 328TI014 explicitly concern the TS 510 cylinder. The tapped decompression-valve hole has long been present in replacement cylinder 1111 020 1200 and sealed with plug 1111 025 2200. The bulletin permits this cylinder for TS 510 of ANY VERSION and, as previously, the 051 chainsaw. It does not grant this cylinder to TS 760 or to 050 merely because they share catalog sheets.
- The table repeats cylinder-with-piston number 1111 020 1200 in BOTH columns and says factory supply is only the modified version (remark 1). Its stated contents are item 2 sealing ring and item 3 plug, NOT decompression valve item 1. A same-number replacement cylinder does not prove the machine originally had decompression or that the valve is included.
- New decompression valve 1111 020 9400 includes item 2 sealing ring A6.5x9.5, number 9636 003 0420. The cylinder instead includes that sealing ring and plug 1111 025 2200. Drawing 328TI014 shows the alternative valve/plug arrangement and separate sealing-ring callouts; it is not an instruction to install valve and plug together in one hole.
- The easy-starting production event is X 24 093 969, but the note says the tapped replacement-cylinder hole already existed. Do not date first existence of the threaded cylinder to that event. The reference to earlier TS 460 decompression explanations does not supply TS 510 torque or leak-test instructions.
- Later exact TS 510/760 sheet C lists the same cylinder, plug, valve and sealing ring alongside other cylinders/valves. Link only the named TS 510 assertion here. The shared 050/051 cylinder sheet is context for the explicitly named 051, not added 050 applicability.
- Historical TI26/1996 section 4: cylinder applicability is explicitly TS 510 and 051; listed new decompression valve is the TS 510 detail. Shared sheets do not add TS 760 or 050. Historical supply is not current stock. No hardware operation was performed.
Source: TI 26/1996, p. 1 · TI 26/1996, p. 9 — TS 510 / 051: unchanged cylinder number and decompression port.
Part numbers (4)
- 1111 020 1200 — Cylinder with piston TS 510 / 051Same number; modified-only supply · TS 510 / 051 cylinder; new decompression-valve detail TS 510 only
- 1111 025 2200 — Cylinder port plugIncluded with replacement cylinder · TS 510 / 051 cylinder; new decompression-valve detail TS 510 only
- 1111 020 9400 — Decompression valveTS 510 valve; includes sealing ring · TS 510 / 051 cylinder; new decompression-valve detail TS 510 only
- 9636 003 0420 — Sealing ring A6.5x9.5Included with valve and cylinder · TS 510 / 051 cylinder; new decompression-valve detail TS 510 only
Wrong number or missing part for the 050, 051? Report a correction →