← 050 · 051 · 075 · 076

Stihl 1111 · Section F · 6 of 14 · 15 parts

Ignition system

Fits 050, 051.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
11011121323456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (15)

PosPart numberDescriptionQty
1 1111 404 1204 Flywheel Fitment / change note → 1
2 9210 261 1140 Hexagon nut M8x1 1
3 1111 400 1303 Ignition module Fitment / change note → → replaced by 1111 400 1301 TI 33/1995 1
4 not sold separately Ignition lead 290 mm not available as a separate item 1
5 0000 989 1010 Grommet 1
6 1110 442 7000 NLA Contact sleeve no longer available from factory 1
7 1111 405 8800 Hose 1
8 9022 371 1020 Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 3
9 9291 021 0120 Washer 5.3 3
10 1118 400 1001 Trigger unit 1
11 9041 216 0300 Pan head screw M3x4 1
12 9045 371 0960 Socket head screw M5x12 1
13 1111 448 1200 Lead retainer 1
Not numbered on the diagram — assemblies, kits and options
— 0000 405 0600 NLA Ignition lead 1 m not illustratedoption 1
— 0000 930 2251 Ignition lead 10 m not illustratedoption 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · 051 / 076

051 / 076: series 1111 replacement ignition assignment

1111 400 1303 and the listed flywheel pairing for series 1111; 290 mm ignition lead.

  • Listed configuration: 1111 400 1303 with flywheel 1111 404 1204.
  • Printed ignition-lead length: 290 mm (11 7/16 in). Preserve the printed metric and inch values; no rounding correction is inferred.
  • TI01/1999 lists replacement combinations for the then-current machines, not every earlier configuration. Older machines are referred to Spare Parts for Previous Models in their own illustrated parts lists; no serial cutoff is supplied here.
  • Use only the listed ignition-module/flywheel combinations. The source warns that incorrect combinations can cause excessive RPM or running in reverse; sharing a module number does not make all flywheels interchangeable.
  • Universal replacement modules may differ from production modules in maker, shape and part number. The source describes installation/function compatibility within its assignments, not universal compatibility or a project hardware test.
  • Some replacement modules require shortening the ignition lead and/or short-circuit wire and crimping a different short-circuit connector. The table gives ignition-lead lengths only; it supplies neither a short-circuit-wire length nor a connector part number. Do not infer that every row needs modification.
  • Only the named models and printed series are covered. A shared IPL sheet does not extend this assignment to unnamed models or modern MS equivalents. This 1999 USA bulletin is historical guidance, not current availability.

Source: TI 1/1999, p. 1 · TI 1/1999, p. 2 — 1.1 general restrictions and 1.2.1 chainsaw assignments.

Part numbers (2)
  • 1111 400 1303 — Replacement ignition moduleAssigned replacement · 051 / 076, series 1111, only with the listed flywheel branch
  • 1111 404 1204 — Listed configuration flywheelRequired pairing · 051 / 076, series 1111; listed configuration only

Wrong number or missing part for the 050, 051? Report a correction →