Stihl 1117 · Section G · 7 of 11 · 31 parts
Ignition system
Fits 048.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
No exploded view for this assembly. The catalogue lists its parts without a drawing.
Parts (31)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1117 400 1206 | Flywheel | 1 |
| 2 | 9210 261 1140 | Hexagon nut M8x1 | 1 |
| 3 | 0000 400 1300 | Ignition module Fitment / change note → → replaced by 1122 400 1311, 0000 400 1305, 0000 400 1305 TI 51/1994 | 1 |
| 4 | not sold separately | Ignition lead 160 mm not available as a separate item | 1 |
| 5 | 1125 448 1201 | Lead retainer | 1 |
| 6 | 1118 440 1100 | Short circuit wire 330 mm / 13'' | 1 |
| 7 | 1110 442 7000 NLA | Contact sleeve no longer available from factory | 1 |
| 8 | 0751 030 8953 NLA | Terminal socket 4.8-1 no longer available from factory | 1 |
| 9 | 1117 442 0905 | Insulating hose 110 mm / 4.3'' | 1 |
| 10 | 9294 021 0120 | Washer 5.3 | 2 |
| 11 | 9022 341 1050 | Spline screw IS-M5x25 | 2 |
| 12 | 1117 400 1207 | Flywheel | 1 |
| 13 | 1118 028 0700 | Flange | 1 |
| 14 | 9062 319 0650 | Countersunk screw M4x10 | 3 |
| 15 | 1118 404 3500 | Generator | 1 |
| 16 | 1118 431 6600 NLA | Terminal pin no longer available from factory | 1 |
| 17 | 9048 319 0650 | Pan head screw M4x10 | 3 |
| 18 | 0000 989 0509 | Grommet | 1 |
| 19 | 0000 989 0506 | Grommet | 1 |
| 20 | 0000 989 0507 | Grommet | 1 |
| 21 | 0000 998 0603 | Torsion spring → replaced by 0000 998 0604 TI 30/1995 | 1 |
| 22 | 1106 405 1000 | Spark plug boot → replaced by 1128 405 1000, 1128 405 1000 TI 30/1995 | 1 |
| 23 | 1118 400 2000 | Set of points | 1 |
| 24 | 1118 404 3400 | Capacitor | 1 |
| 25 | 9047 319 0650 | Pan head screw M4x10 | 3 |
| 26 | not sold separately | Ignition module SEM no longer available from factory | 1 |
| 27 | not sold separately | Ignition module SEM no longer available from factory | 1 |
| 28 | 9045 319 1070 | Socket head screw M5x30 | 1 |
| 29 | 0000 989 1010 | Grommet | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 0000 405 0600 NLA | Ignition lead 1 m not illustratedoption | 1 |
| — | 0000 930 2251 | Ignition lead 10 m not illustratedoption | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Conditional replacement · 024 / 026 / 028 / 029 / 034 / 036 / 038 / 039 / 048
024–048 listed saws: aluminium-flywheel ignition module split
024, 026, 028, 029, 034, 036, 038, 039 and 048 use optimized 0000 400 1300, not the former universal 1305 recommendation.
- Applies only to the explicitly named 024, 026, 028, 029, 034, 036, 038, 039 and 048 aluminium-flywheel saws. The 044 and restricted 064 branches are separate records; a numeric span in the title does not include unnamed models.
- The reactivated 0000 400 1300 number identifies the optimized aluminium-flywheel module here. The modified version has an integrated 400 mm (15 3/4 inch) ignition lead, no separate ignition lead and no short-circuit wire. The reused number alone does not distinguish all older constructions.
- Only 0000 400 1300 is recommended for these machines. The permission to use existing 0000 400 1305 stock belongs to 046/066, not these models. No machine-number limit is supplied for these nine saws.
- TI22/1998 reports isolated reliability problems with the former universal module on aluminium-flywheel machines. Different timing requirements led to two optimized modules; this is historical manufacturer field-test guidance, not a project hardware test.
- Order only 0000 400 1300 or 1122 400 1314 according to the named model and restrictions. There is no automatic one-number replacement for 0000 400 1305.
- The 02.98 microfiche/CD-ROM issue documents the future part numbers. Both summary rows say the original 0000 400 1305 is no longer available from the factory; that does not revoke the expressly permitted use of existing stocks on eligible 046/066 machines.
- Introduction is in progress, without a new production cutoff. Factory availability is a 1998 statement, not current stock or proof of physical interchange.
Source: TI 22/1998, p. 1 · TI 22/1998, p. 2 — Sections 1–6: history, split, service note and ordering.
Part numbers (2)
- 0000 400 1305 — Former universal ignition moduleEarlier recommendation · Named saws; superseded by model-specific guidance
- 0000 400 1300 — Optimized aluminium-flywheel ignition moduleLater replacement · Only the nine explicitly named saw models
Wrong number or missing part for the 048? Report a correction →