← 028 (Wood Boss)

Stihl 1118 · Section F · 6 of 10 · 47 parts

Rewind starter (Pawl), Ignition system (Electronic)

Fits 028.

Parts diagrams →

Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415161718192202122232426293303132333435363738394404142434445464756789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (47)

PosPart numberDescriptionQty
1 1118 080 1805 Fan housing 1
2 1110 084 9102 Bushing 1
3 0000 967 2020 NLA Nameplate STIHL 1
4 0000 974 1000 Round head rivet 3x6 2
5 9416 868 6630 Hollow rivet 6.5x0.5x6.8 4
6 0000 958 0607 Washer 1
7 1118 190 0600 Rewind spring 1
8 1125 195 0401 Rope rotor 1
9 1125 195 7200 Pawl 1
10 1113 195 8200 Starter rope Ø 3.5x960 mm 1
11 1121 195 3400 Starter grip 1
12 0000 958 0923 Washer 1
13 1118 195 3500 Spring 1
14 1118 084 7800 Segment 1
15 9099 021 0830 NLA Self-tapping screw 4.2x12 3
16 9022 341 1010 Spline screw IS-M5x18 3
17 1118 400 1206 Flywheel Fitment / change note → 1
18 9210 261 1140 Hexagon nut M8x1 1
19 0000 400 1300 Ignition module Fitment / change note → → replaced by 1122 400 1311, 0000 400 1305, 0000 400 1305 TI 51/1994 1
20 not sold separately Ignition lead 175 mm 1
21 0000 448 1250 Lead retainer 1
22 1118 440 1100 Short circuit wire 330 mm / 13'' 1
23 1110 442 7000 NLA Contact sleeve no longer available from factory 1
24 1119 405 8000 Hose 1
26 9022 371 1022 Spline screw IS-M5x20 2
29 1118 431 6600 NLA Terminal pin no longer available from factory 1
30 9048 319 0650 Pan head screw M4x10 3
31 9062 319 0650 Countersunk screw M4x10 3
32 1118 028 0700 Flange 1
33 0000 989 0809 Grommet 1
34 0000 989 0507 Grommet 1
35 0000 998 0603 Torsion spring → replaced by 0000 998 0604 TI 30/1995 1
36 1106 405 1000 Spark plug boot → replaced by 1128 405 1000, 1128 405 1000 TI 30/1995 1
37 0751 030 8953 NLA Terminal socket 4.8-1 no longer available from factory 1
38 0000 989 1010 Grommet 1
39 1118 190 1000 Rope rotor 1
40 0000 963 1001 Bushing 1
41 9079 216 0660 Flat head screw M4x12 1
42 1118 400 2000 Set of points 3
43 1118 404 3400 Capacitor 1
44 9047 319 0650 Pan head screw M4x10 3
45 1118 400 1305 Ignition coil 1
46 1118 195 7200 Pawl 1
47 0000 958 0806 Washer 1
Not numbered on the diagram — assemblies, kits and options
— 0000 930 2203 Starter rope Ø 3.5 mm x 30.5 m option 1
— 0000 405 0600 NLA Ignition lead 1 m option 1
— 0000 930 2251 Ignition lead 10 m option 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Conditional replacement · 024 / 026 / 028 / 029 / 034 / 036 / 038 / 039 / 048

024–048 listed saws: aluminium-flywheel ignition module split

024, 026, 028, 029, 034, 036, 038, 039 and 048 use optimized 0000 400 1300, not the former universal 1305 recommendation.

  • Applies only to the explicitly named 024, 026, 028, 029, 034, 036, 038, 039 and 048 aluminium-flywheel saws. The 044 and restricted 064 branches are separate records; a numeric span in the title does not include unnamed models.
  • The reactivated 0000 400 1300 number identifies the optimized aluminium-flywheel module here. The modified version has an integrated 400 mm (15 3/4 inch) ignition lead, no separate ignition lead and no short-circuit wire. The reused number alone does not distinguish all older constructions.
  • Only 0000 400 1300 is recommended for these machines. The permission to use existing 0000 400 1305 stock belongs to 046/066, not these models. No machine-number limit is supplied for these nine saws.
  • TI22/1998 reports isolated reliability problems with the former universal module on aluminium-flywheel machines. Different timing requirements led to two optimized modules; this is historical manufacturer field-test guidance, not a project hardware test.
  • Order only 0000 400 1300 or 1122 400 1314 according to the named model and restrictions. There is no automatic one-number replacement for 0000 400 1305.
  • The 02.98 microfiche/CD-ROM issue documents the future part numbers. Both summary rows say the original 0000 400 1305 is no longer available from the factory; that does not revoke the expressly permitted use of existing stocks on eligible 046/066 machines.
  • Introduction is in progress, without a new production cutoff. Factory availability is a 1998 statement, not current stock or proof of physical interchange.

Source: TI 22/1998, p. 1 · TI 22/1998, p. 2 — Sections 1–6: history, split, service note and ordering.

Part numbers (2)
  • 0000 400 1305 — Former universal ignition moduleEarlier recommendation · Named saws; superseded by model-specific guidance
  • 0000 400 1300 — Optimized aluminium-flywheel ignition moduleLater replacement · Only the nine explicitly named saw models

Historical fitment · 028

028: series 1118 replacement ignition assignment

0000 400 1300 and the listed flywheel pairing for series 1118; 175 mm ignition lead.

  • Listed configuration: 0000 400 1300 with flywheel 1118 400 1206.
  • Printed ignition-lead length: 175 mm (6 7/8 in). Preserve the printed metric and inch values; no rounding correction is inferred.
  • TI01/1999 lists replacement combinations for the then-current machines, not every earlier configuration. Older machines are referred to Spare Parts for Previous Models in their own illustrated parts lists; no serial cutoff is supplied here.
  • Use only the listed ignition-module/flywheel combinations. The source warns that incorrect combinations can cause excessive RPM or running in reverse; sharing a module number does not make all flywheels interchangeable.
  • Universal replacement modules may differ from production modules in maker, shape and part number. The source describes installation/function compatibility within its assignments, not universal compatibility or a project hardware test.
  • Some replacement modules require shortening the ignition lead and/or short-circuit wire and crimping a different short-circuit connector. The table gives ignition-lead lengths only; it supplies neither a short-circuit-wire length nor a connector part number. Do not infer that every row needs modification.
  • Only the named models and printed series are covered. A shared IPL sheet does not extend this assignment to unnamed models or modern MS equivalents. This 1999 USA bulletin is historical guidance, not current availability.

Source: TI 1/1999, p. 1 · TI 1/1999, p. 2 — 1.1 general restrictions and 1.2.1 chainsaw assignments.

Part numbers (2)
  • 0000 400 1300 — Replacement ignition moduleAssigned replacement · 028, series 1118, only with the listed flywheel branch
  • 1118 400 1206 — Listed configuration flywheelRequired pairing · 028, series 1118; listed configuration only

Wrong number or missing part for the 028? Report a correction →