Stihl 1121 · Section E · 5 of 16 · 36 parts
Ignition system
Fits 024.
Historical fitment & changes (3) — includes parts and conditions not shown on this drawing.
Parts (36)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1121 400 1200 | Flywheel Fitment / change note → | 1 |
| 2 | 1121 400 1207 | Flywheel Fitment / change note → | 1 |
| 3 | 1118 400 4000 NLA | Generator | 1 |
| 4 | 1118 431 6600 NLA | Terminal pin no longer available from factory | 1 |
| 5 | 9041 216 0540 NLA | Pan head screw M3.5x12 | 3 |
| 6 | 1121 405 1900 NLA | Support | 1 |
| 7 | 9210 261 1140 | Hexagon nut M8x1 | 1 |
| 8 | 0000 400 1300 | Ignition module Fitment / change note → → replaced by 1122 400 1311, 0000 400 1305, 0000 400 1305 TI 51/1994 | 1 |
| 9 | not sold separately | Ignition lead 150 mm not available as a separate item | 1 |
| 10 | 0000 989 1010 | Grommet | 1 |
| 11 | 0000 448 1250 | Lead retainer | 1 |
| 12 | 1121 440 3002 | Wiring harness | 1 |
| 13 | 0751 030 8957 | Terminal socket 4.8-1/0.8 no longer available from factory | 1 |
| 14 | 0751 030 8969 | Terminal socket A5-1.5 no longer available from factory | 1 |
| 15 | 1110 442 7000 NLA | Contact sleeve no longer available from factory | 2 |
| 16 | 0000 989 0507 | Grommet | 1 |
| 17 | 1125 442 0402 | Insulating hose 90 mm / 3.5'' | 1 |
| 18 | 1121 440 3003 NLA | Wiring harness | 1 |
| 19 | 1118 431 6700 NLA | Terminal socket no longer available from factory | 1 |
| 20 | not sold separately | Terminal socket not available as a separate item | 1 |
| 21 | 1118 431 6600 NLA | Terminal pin no longer available from factory | 1 |
| 22 | 9022 341 1019 | Spline screw IS-M5x20 | 2 |
| 24 | 1119 442 7000 | Contact sleeve no longer available from factory | 1 |
| 25 | 0751 030 8953 NLA | Terminal socket 4.8-1 no longer available from factory | 1 |
| 26 | 1121 405 8001 | Insulating hose 90 mm / 3.5'' | 1 |
| 27 | not sold separately | Lead 270 mm / 10.6'' not available as a separate item | 1 |
| 28 | 1110 442 7000 NLA | Contact sleeve no longer available from factory | 1 |
| 29 | 0751 030 8969 | Terminal socket A5-1.5 no longer available from factory | 1 |
| 30 | 1121 405 8000 | Insulating hose 90 mm / 3.5'' | 1 |
| 31 | 1121 440 2202 | Ground wire | 1 |
| 32 | 0751 030 8466 | Terminal socket housing no longer available from factory | 1 |
| 33 | 4112 432 9202 | Grommet | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 0000 405 0600 NLA | Ignition lead 1 m not illustratedoption | 1 |
| — | 0000 930 2251 | Ignition lead 10 m not illustratedoption | 1 |
| — | 1121 007 1033 | Ground wire kit | 1 |
| — | 0751 010 1110 | Lead 10 m / 33' not illustratedoption | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Conditional replacement · 024 / 026 / 028 / 029 / 034 / 036 / 038 / 039 / 048
024–048 listed saws: aluminium-flywheel ignition module split
024, 026, 028, 029, 034, 036, 038, 039 and 048 use optimized 0000 400 1300, not the former universal 1305 recommendation.
- Applies only to the explicitly named 024, 026, 028, 029, 034, 036, 038, 039 and 048 aluminium-flywheel saws. The 044 and restricted 064 branches are separate records; a numeric span in the title does not include unnamed models.
- The reactivated 0000 400 1300 number identifies the optimized aluminium-flywheel module here. The modified version has an integrated 400 mm (15 3/4 inch) ignition lead, no separate ignition lead and no short-circuit wire. The reused number alone does not distinguish all older constructions.
- Only 0000 400 1300 is recommended for these machines. The permission to use existing 0000 400 1305 stock belongs to 046/066, not these models. No machine-number limit is supplied for these nine saws.
- TI22/1998 reports isolated reliability problems with the former universal module on aluminium-flywheel machines. Different timing requirements led to two optimized modules; this is historical manufacturer field-test guidance, not a project hardware test.
- Order only 0000 400 1300 or 1122 400 1314 according to the named model and restrictions. There is no automatic one-number replacement for 0000 400 1305.
- The 02.98 microfiche/CD-ROM issue documents the future part numbers. Both summary rows say the original 0000 400 1305 is no longer available from the factory; that does not revoke the expressly permitted use of existing stocks on eligible 046/066 machines.
- Introduction is in progress, without a new production cutoff. Factory availability is a 1998 statement, not current stock or proof of physical interchange.
Source: TI 22/1998, p. 1 · TI 22/1998, p. 2 — Sections 1–6: history, split, service note and ordering.
Part numbers (2)
- 0000 400 1305 — Former universal ignition moduleEarlier recommendation · Named saws; superseded by model-specific guidance
- 0000 400 1300 — Optimized aluminium-flywheel ignition moduleLater replacement · Only the nine explicitly named saw models
Historical fitment · 024 / 026
024 / 026: series 1121 replacement ignition assignment
0000 400 1300 and the listed flywheel pairings for series 1121; 150 mm ignition lead.
- Standard: 0000 400 1300 with flywheel 1121 400 1200.
- Heating: 0000 400 1300 with flywheel 1121 400 1207.
- Printed ignition-lead length: 150 mm (5 7/8 in). Preserve the printed metric and inch values; no rounding correction is inferred.
- TI01/1999 lists replacement combinations for the then-current machines, not every earlier configuration. Older machines are referred to Spare Parts for Previous Models in their own illustrated parts lists; no serial cutoff is supplied here.
- Use only the listed ignition-module/flywheel combinations. The source warns that incorrect combinations can cause excessive RPM or running in reverse; sharing a module number does not make all flywheels interchangeable.
- Universal replacement modules may differ from production modules in maker, shape and part number. The source describes installation/function compatibility within its assignments, not universal compatibility or a project hardware test.
- Some replacement modules require shortening the ignition lead and/or short-circuit wire and crimping a different short-circuit connector. The table gives ignition-lead lengths only; it supplies neither a short-circuit-wire length nor a connector part number. Do not infer that every row needs modification.
- Only the named models and printed series are covered. A shared IPL sheet does not extend this assignment to unnamed models or modern MS equivalents. This 1999 USA bulletin is historical guidance, not current availability.
Source: TI 1/1999, p. 1 · TI 1/1999, p. 2 — 1.1 general restrictions and 1.2.1 chainsaw assignments.
Part numbers (3)
- 0000 400 1300 — Replacement ignition moduleAssigned replacement · 024 / 026, series 1121, only with the listed flywheel branch
- 1121 400 1200 — Standard flywheelRequired pairing · 024 / 026, series 1121; standard only
- 1121 400 1207 — Heating flywheelRequired pairing · 024 / 026, series 1121; heating only
Service note · 024 / 026
024/026 spark-plug boot seal: production deletion, spare retained
Near-future deletion has no printed machine-number boundary.
- Section 3 says seal 1121 084 1410 ON THE SPARK PLUG BOOT will be discontinued on the production line IN THE NEAR FUTURE, but remains available as a REPLACEMENT PART. The seal is not the spark-plug boot itself, and no replacement seal number is introduced.
- The X 36 348 620 cutoff belongs to sections 1 and 2. Do NOT assign it to this undated future deletion. No instruction to remove seals from existing machines, current-stock promise or reason for deletion is stated.
- Last Technical Information on models 024, 026: 38.96 is bibliographic context, not a delegated procedure. The four-page original has copyright 1997 and document number 6045, with no exact issue date printed. The retained catalogue title mentions Electric hand, but the original contents and section 3 concern the SPARK-PLUG BOOT SEAL; no electric-handle change is asserted by this TI.
- Historical TI18/1997 evidence for 024 and 026 only, not MS240/MS260 or other successors. Model-sheet links aid discovery, not universal variant fitment. Factory supply statements describe the bulletin date, not current stock. No reciprocal interchange or physical verification inferred. No hardware operation was performed.
Source: TI 18/1997, p. 1 · TI 18/1997, p. 4 — 024/026 spark-plug boot seal: production deletion, spare retained.
Part numbers (1)
- 1121 084 1410 — Seal on spark-plug bootProduction deletion announced; replacement retained · 024/026; 024/026 spark-plug boot seal: production deletion, spare retained; configuration restrictions in note
Wrong number or missing part for the 024? Report a correction →