← 024 · 026 · MS 260 · MS 240

Stihl 1121 · Section F · 6 of 17 · 26 parts

Quick chain tensioner

Fits MS 260, MS 260 C.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
111011121213141415161718192202122232425263456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (26)

PosPart numberDescriptionQty
1 1121 020 2115 Crankcase Fitment / change note → 1
2 0000 988 5211 Connector 1
3 9416 868 6531 Hollow rivet 6.5x0.5x6.8 2
4 9371 470 2610 Cylindrical pin 5x18 2
5 0000 974 1200 Notched pin 2.6x8 1
6 1128 640 9100 Valve 1
7 9503 003 0320 Grooved ball bearing 16002 1
8 9523 003 4260 Grooved ball bearing 15x35x13 1
9 9022 371 1020 Spline screw IS-M5x20 → replaced by 9022 371 1050 TI 30/2004 5
10 1120 162 5200 Pin 1
11 1121 162 5205 Pin 1
12 1121 162 5200 Pin 2
13 0000 664 2405 Collar screw M8 1
14 1121 648 6610 Bumper strip 2
15 1121 021 1102 Cover 1
16 9022 313 0660 Spline screw IS-M4x12 2
17 1121 664 1000 Inner side plate 1
18 9039 488 0680 Self-tapping screw M4x16 1
19 1135 660 3000 Tensioning gear 1
20 1121 664 7301 Nut M4 1
21 1121 640 1700 Chain sprocket cover 1
22 9076 478 2996 Pan head self-tapping screw P4x12 1
23 1121 648 3800 Cover plate 1
24 1121 648 2200 NLA Adjusting wheel 1
25 1125 656 1501 Guard 1
26 1121 660 1000 Wing nut 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Conditional replacement · 026 / MS 260

026 / MS 260: crankcases for clip cap and revised wiring

Ordinary and quick-tensioner crankcases have different replacement numbers.

  • Ordinary crankcase 1121 020 2112 changes to 1121 020 2117; the quick-chain-tensioner version changes from 1121 020 2114 to 1121 020 2115. Keep these configurations separate. Both previous versions remain available for older machines.
  • The revised cases have modified oil filler openings for the clip cap and changes for the ignition-lead routing. This is not a claim that an old cap, old wiring path or either crankcase variant can be freely mixed with the new configuration.
  • Shared IPL sheets do not extend these changes to unnamed variants. Introduction is in progress; the TI gives no numerical serial cutoff. Availability is the historical 2001 factory statement, not current stock. Later catalog numbers do not replace the historical evidence or prove unrestricted interchangeability.

Source: TI 43/2001, p. 4 · TI 43/2001, p. 5 · TI 43/2001, p. 7 · TI 43/2001, p. 8 — Section5, section7 routing context and summary rows22–23/remark1.

Part numbers (4)
  • 1121 020 2112 — Ordinary crankcasePrevious; retained · Only the named model/configuration; see conditions
  • 1121 020 2117 — Ordinary crankcaseNew · Only the named model/configuration; see conditions
  • 1121 020 2114 — Quick-chain-tensioner crankcasePrevious; retained · Only the named model/configuration; see conditions
  • 1121 020 2115 — Quick-chain-tensioner crankcaseNew · Only the named model/configuration; see conditions

Wrong number or missing part for the MS 260, MS 260 C? Report a correction →