← 024 · 026 · MS 260 · MS 240

Stihl 1121 · Section H · 8 of 17 · 19 parts

Rewind starter

Fits MS 260, MS 260 C.

Parts diagrams →

Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131414151617234566789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (19)

PosPart numberDescriptionQty
1 1121 080 1812 Fan housing Fitment / change note → 1
2 1121 967 1507 Model plate MS 260 Fitment / change note → 1
3 1121 967 1509 Model plate MS 260 C 1
4 1110 084 9102 Bushing 1
5 0000 958 0514 Washer 1
6 9416 868 5630 Hollow rivet 5.5x0.5x6.8 4
7 1118 190 0600 Rewind spring 1
8 1118 195 0300 Spring housing 1
9 1125 195 0401 Rope rotor 1
10 1125 195 7200 Pawl 1
11 0000 958 0923 Washer 1
12 1118 195 3500 Spring 1
13 0000 190 3401 Starter grip ElastoStart Ø 3.5 mm 1
14 1113 195 8200 Starter rope Ø 3.5x960 mm 1
15 0000 195 7001 Cap 1
16 9022 313 0680 Spline screw IS-M4x16 3
17 1121 195 3400 Starter grip 1
Not numbered on the diagram — assemblies, kits and options
— 1121 080 2101 Fan housing with rewind starter Fitment / change note → 1
— 0000 930 2203 Starter rope Ø 3.5 mm x 30.5 m option 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Conditional replacement · 026 / MS 260

026 / MS 260: fan housing with neutral repair badge

A new housing can repair an 026 while preserving its shroud-mounted model identity.

  • The round nameplate clips to the revised fan housing; the separate company logo formerly in that location is deleted from the new design. New fan-housing assembly 1121 080 2101 replaces 1121 080 2100; bare housing 1121 080 1812 replaces 1121 080 1808. Both previous housings are supplied only while factory stocks last.
  • Replacement housings include an MS 260 badge and neutral STIHL-only badge 0000 967 1500. For an 026 that retains its model nameplate on the shroud, use the neutral badge; do not relabel the repaired saw MS 260 merely because of its housing.
  • The 026 / MS 260 model nameplate changes from 1121 967 1512 to 1121 967 1507. Old model nameplate and company logo 0000 967 2035 remain available for older machines. The summary repeats the housing assembly/bare housing as items5–6 and26–27; these are not additional different housing numbers. Its badge roster includes market/model alternatives, not a requirement to fit every badge at once.
  • Shared IPL sheets do not extend these changes to unnamed variants. Introduction is in progress; the TI gives no numerical serial cutoff. Availability is the historical 2001 factory statement, not current stock. Later catalog numbers do not replace the historical evidence or prove unrestricted interchangeability.

Source: TI 43/2001, p. 1 · TI 43/2001, p. 2 · TI 43/2001, p. 5 · TI 43/2001, p. 7 · TI 43/2001, p. 8 — Sections1,2.3,6 and summary rows5–11,26–27/remarks1–2.

Part numbers (8)
  • 1121 080 2100 — Fan housing with starterPrevious; stocks only · Only the named model/configuration; see conditions
  • 1121 080 2101 — Fan housing with starterNew · Only the named model/configuration; see conditions
  • 1121 080 1808 — Fan housingPrevious; stocks only · Only the named model/configuration; see conditions
  • 1121 080 1812 — Fan housingNew · Only the named model/configuration; see conditions
  • 0000 967 2035 — Company logoDeleted from new design; old stock item retained · Only the named model/configuration; see conditions
  • 1121 967 1512 — 026 nameplatePrevious; retained · Only the named model/configuration; see conditions
  • 1121 967 1507 — MS 260 nameplateNew · Only the named model/configuration; see conditions
  • 0000 967 1500 — Neutral STIHL nameplate026 repair badge · Only the named model/configuration; see conditions

Conditional replacement · MS 260

MS 260: intake-air preheating kit for revised covers

The redesigned kit follows the round-nameplate housing and changed cover contours.

  • Intake-air preheating kit 1121 007 1014 is the new special accessory for MS 260 and accounts for the revised fan housing, shroud and carburetor-cover design. The summary lists previous kit 1121 007 1044; the old kit and its listed components remain available for older machines. This does not establish the new kit as an unrestricted 026 retrofit.
  • The new kit includes carburetor box cover 1121 140 1916 (previous 1121 140 1907), itself including cover 1121 141 2502 (previous 1121 141 2505), and cover plate 1121 084 8202 (previous 1121 084 8201). Do not confuse these accessory covers with the ordinary cover 1121 140 1915.
  • Shared IPL sheets do not extend these changes to unnamed variants. Introduction is in progress; the TI gives no numerical serial cutoff. Availability is the historical 2001 factory statement, not current stock. Later catalog numbers do not replace the historical evidence or prove unrestricted interchangeability.

Source: TI 43/2001, p. 5 · TI 43/2001, p. 7 · TI 43/2001, p. 8 — Section6 accessory drawing and summary rows18–21/remark1.

Part numbers (8)
  • 1121 007 1044 — Intake-air preheating kitPrevious; retained · Only the named model/configuration; see conditions
  • 1121 007 1014 — Intake-air preheating kitNew MS260 accessory · Only the named model/configuration; see conditions
  • 1121 140 1907 — Accessory carburetor box coverPrevious; retained · Only the named model/configuration; see conditions
  • 1121 140 1916 — Accessory carburetor box coverNew · Only the named model/configuration; see conditions
  • 1121 141 2505 — Accessory coverPrevious; retained · Only the named model/configuration; see conditions
  • 1121 141 2502 — Accessory coverNew · Only the named model/configuration; see conditions
  • 1121 084 8201 — Cover platePrevious; retained · Only the named model/configuration; see conditions
  • 1121 084 8202 — Cover plateNew · Only the named model/configuration; see conditions

Wrong number or missing part for the MS 260, MS 260 C? Report a correction →