← 024 · 026 · MS 260 · MS 240

Stihl 1121 · Section J · 9 of 17 · 24 parts

Tank housing

Fits MS 260, MS 260 C.

Parts diagrams →

Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111213141516171819220212223243456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (24)

PosPart numberDescriptionQty
1 1121 350 0829 Tank housing Fitment / change note → 1
2 1121 122 6600 Collar screw 2
3 0000 967 3662 Warning pictogram MS 1
4 0000 350 5800 Tank vent Fitment / change note → → replaced by 0000 350 5804 TI 41/2003 1
5 not sold separately O-ring not available as a separate item 1
6 1121 791 2800 Stop buffer 1
7 0000 350 0525 Filler cap Fitment / change note → 1
8 9645 948 7734 O-ring 25x3.5 Fitment / change note → 1
9 1125 442 1601 Contact spring 1
10 1121 123 7503 Grommet 1
11 1121 123 7501 Grommet 1
12 1121 123 7502 Grommet 1
13 1121 123 7504 Grommet 1
14 1121 358 7700 Hose 1
15 0000 350 3504 Pickup body 1
16 1113 141 1805 Sleeve 1
17 1121 141 2200 Manifold 1
18 9771 021 2550 Hose clip Ø 32x5 1
19 1113 141 8600 Impulse hose 1
20 1121 121 8600 Washer 1
21 1121 791 0600 Handle molding 1
22 9074 478 3076 Pan head self-tapping screw IS-P4x19 1
23 0000 967 3500 NLA Instruction label 1
24 0000 967 3405 Instruction label no longer available from factory 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Conditional replacement · 026 / MS 260

026 / MS 260: clip caps and replacement fuel-tank housing

Same cap design does not mean the same fuel/oil cap or sealing ring.

  • Both tanks use the tool-free hinged-clip design, but fuel cap 0000 350 0525 and oil cap 0000 350 0526 have different numbers and seals. Modified filler openings are required; the TI does not authorize a cap-only conversion of an old filler neck.
  • To open the depicted cap, raise the clip and turn about a quarter-turn counterclockwise. To close, align the marks with the clip raised, turn about a quarter-turn clockwise to the stop, then fold the clip down. Proper closure requires the clip lug to engage its recess. These instructions describe the historical cap shown in the TI.
  • Tank housing 1121 350 0829 replaces 1121 350 0828 with a modified neck and new vent. The old housing includes the old vent (summary item16); the new housing includes items14–17: fuel cap, 25 x 3.5 sealing ring, new vent and its 10 x 2 ring. The clip cap was to be supplied with the new housing for about three years, enabling repairs to 026 saws; that historical packaging period is not a current kit-content guarantee. Old housing supply is limited to existing factory stocks.
  • Fuel cap 0000 350 0520 changes to 0000 350 0525 with ring 9645 948 7734 (25 x 3.5). Oil cap 0000 350 0510 changes to 0000 350 0526 with ring 9645 948 2470 (23 x 3). Both old caps remain available for older machines.
  • Shared IPL sheets do not extend these changes to unnamed variants. Introduction is in progress; the TI gives no numerical serial cutoff. Availability is the historical 2001 factory statement, not current stock. Later catalog numbers do not replace the historical evidence or prove unrestricted interchangeability.

Source: TI 43/2001, p. 2 · TI 43/2001, p. 3 · TI 43/2001, p. 7 · TI 43/2001, p. 8 — Sections3–4, all cap-operation diagrams and summary rows12–15,24–25/remarks1–2.

Part numbers (8)
  • 1121 350 0828 — Fuel-tank housingPrevious; stocks only · Only the named model/configuration; see conditions
  • 1121 350 0829 — Fuel-tank housing with items14–17New · Only the named model/configuration; see conditions
  • 0000 350 0520 — Fuel capPrevious; retained · Only the named model/configuration; see conditions
  • 0000 350 0525 — Fuel clip capNew; fuel only · Only the named model/configuration; see conditions
  • 9645 948 7734 — Sealing ring 25 x 3.5New fuel-cap seal · Only the named model/configuration; see conditions
  • 0000 350 0510 — Oil capPrevious; retained · Only the named model/configuration; see conditions
  • 0000 350 0526 — Oil clip capNew; oil only · Only the named model/configuration; see conditions
  • 9645 948 2470 — Sealing ring 23 x 3New oil-cap seal · Only the named model/configuration; see conditions

Conditional replacement · 026 / MS 260

026 / MS 260: diaphragm tank vent and sealing ring

Replacement vent admits air under tank vacuum; no pressure threshold is specified.

  • Vent 0000 350 5800 replaces 1121 350 5802 in the revised housing; it includes sealing ring 9645 948 7512 (10 x 2). The previous vent remains available for older machines.
  • Construction drawing: perforated sheet/diaphragm (1), air-side filter (2), tank-side filter (3), integral protective cap (4). The function drawings use a different key: air side (1), tank side (2), diaphragm (3), valve plate (4). Do not transfer callout numbers between drawings.
  • Equal air/tank pressures let the spring hold the diaphragm against the valve plate, closing the valve. Fuel withdrawal creates tank vacuum, lifting the diaphragm and admitting air; equalized pressure closes it again. No numerical test pressure, adjustment or reverse-pressure behavior is specified.
  • Shared IPL sheets do not extend these changes to unnamed variants. Introduction is in progress; the TI gives no numerical serial cutoff. Availability is the historical 2001 factory statement, not current stock. Later catalog numbers do not replace the historical evidence or prove unrestricted interchangeability.

Source: TI 43/2001, p. 3 · TI 43/2001, p. 4 · TI 43/2001, p. 7 · TI 43/2001, p. 8 — Section4.1 exploded/cross-section diagrams and summary rows16–17/remark1.

Part numbers (3)
  • 1121 350 5802 — Tank ventPrevious; retained · Only the named model/configuration; see conditions
  • 0000 350 5800 — Diaphragm tank ventNew; includes ring · Only the named model/configuration; see conditions
  • 9645 948 7512 — Sealing ring 10 x 2Vent ring · Only the named model/configuration; see conditions

Wrong number or missing part for the MS 260, MS 260 C? Report a correction →