Stihl 1122 · Section E · 5 of 17 · 33 parts
AV system
Fits 066.
Historical fitment & changes (3) — includes parts and conditions not shown on this drawing.
Parts (33)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1122 790 9101 | Hand guard Fitment / change note → | 1 |
| 2 | 1124 792 5500 | Bushing Fitment / change note → | 1 |
| 3 | 1124 792 5505 | Bushing Fitment / change note → | 1 |
| 4 | 9022 341 1090 | Spline screw IS-M5x40 Fitment / change note → | 1 |
| 5 | 1122 790 9102 | Hand guard Fitment / change note → → replaced by 1122 790 9101 TI 10/2008 | 1 |
| 6 | 1128 160 5000 | Lever | 1 |
| 7 | 9460 624 0400 | E-clip 4 | 2 |
| 8 | 1121 162 5010 | Lever | 1 |
| 9 | 0000 997 0628 | Spring | 1 |
| 10 | 1122 160 5400 | Brake band | 1 |
| 11 | 1121 160 5500 | Tension spring Fitment / change note → | 1 |
| 12 | 1125 162 8002 | Hose 20 mm / 13/16'' | 1 |
| 13 | 1122 790 9905 | Annular buffer 1122/05 | 1 |
| 14 | 1122 790 9901 NLA | Annular buffer 1122/01 | 1 |
| 15 | 1125 790 9906 | Annular buffer 1125/06 | 2 |
| 16 | 1122 790 9921 NLA | Annular buffer 1122/21 | 1 |
| 17 | 1122 790 9900 | Annular buffer 1122/00 | 1 |
| 18 | 1125 790 9904 | Annular buffer 1125/04 | 2 |
| 19 | 1122 790 9920 | Annular buffer 1122/20 | 1 |
| 20 | 1122 790 9902 NLA | Annular buffer 1122/02 | 1 |
| 21 | 1125 790 9910 | Annular buffer 1125/10 | 2 |
| 22 | 1122 790 9922 NLA | Annular buffer 1122/22 | 1 |
| 23 | 9022 341 0960 | Spline screw IS-M5x12 → replaced by 9022 341 0980 TI 3/2006 | 2 |
| 24 | 9022 341 0980 | Spline screw IS-M5x16 | 1 |
| 25 | 9074 478 4435 | Pan head self-tapping screw IS-P6x19 | 4 |
| 26 | 1125 791 7306 | Plug | 2 |
| 27 | 1122 791 7301 | Plug | 1 |
| 28 | 1122 791 7300 | Plug | 1 |
| 29 | 1122 790 9300 | Rubber buffer | 1 |
| 30 | 9022 313 0660 | Spline screw IS-M4x12 | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | not sold separately | AV system soft: | |
| — | not sold separately | AV system normal: | |
| — | not sold separately | AV system hard: | |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Conditional replacement · 066
066 / 066 M / 066 R: keep complete and bare hand guards distinct
Standard/M and R versions have different new complete assemblies and different bare guards.
1 44 673 876 — Production introduction for this specific modification only; not proof of an individual saw’s installed configuration.
- From serial 1 44 673 876, item 7 changes the 066 / 066 M guard from 1122 792 9101 to assembly 1122 790 9101, including common hardware items 3–5 and bare guard item 8, 1122 792 9103. The previous guard is supplied only while stocks last (remark 2). The printed 066 M label is not an inferred M-Tronic designation.
- Item 9 separately changes the 066 R guard from 1122 792 9106 to assembly 1122 790 9102, including common hardware items 3–5 and bare guard item 10, 1122 792 9104. The previous guard is supplied only while stocks last (remark 2). Do not exchange standard/M and R assignments.
- Common assembly hardware is screw 9022 341 1090, brass bushing 1124 792 5500 and rubber bushing 1124 792 5505. Previous 066 screw assembly 0000 790 6103 has no New number; remark 3 retains it for other, unnamed models, not for the new 066 mounting arrangement. No part numbers for those other models are inferred.
- Historical TI52/1999 instructions and spare-availability statements are not present stock or physical interchange verification. Base-model catalog sheets are navigation anchors; printed R/M variant restrictions remain controlling. No applicability to MS 640, MS 650 or MS 660 is inferred.
Source: TI 52/1999, p. 1 · TI 52/1999, p. 2 — Section 1, summary items 3–5,7–10,12 and remarks 2–3.
Part numbers (7)
- 1122 792 9101 — 066 / 066 M previous hand guardExisting-stock-only · 066 / 066 M / 066 R only as separately assigned above
- 1122 790 9101 — 066 / 066 M complete hand guardNew assembly · 066 / 066 M / 066 R only as separately assigned above
- 1122 792 9103 — 066 / 066 M bare hand guardNew assembly item 8 · 066 / 066 M / 066 R only as separately assigned above
- 1122 792 9106 — 066 R previous hand guardExisting-stock-only · 066 / 066 M / 066 R only as separately assigned above
- 1122 790 9102 — 066 R complete hand guardNew assembly · 066 / 066 M / 066 R only as separately assigned above
- 1122 792 9104 — 066 R bare hand guardNew assembly item 10 · 066 / 066 M / 066 R only as separately assigned above
- 0000 790 6103 — 066 previous screw assemblyDeleted arrangement; retained for other unnamed models · 066 / 066 M / 066 R only as separately assigned above
Service note · 064 / 066
064 / 066: lubricated rubber mounting and inward brass flange
Use the revised bushings and screw on previous hand guards too.
1 44 673 876 — Production introduction for this specific modification only; not proof of an individual saw’s installed configuration.
- The new front hand guard is rubber-mounted at the fan side from 1 44 673 876 and secured with spline screw IS M5 x 40 x 25, 9022 341 1090. Previous screw assemblies are deleted from this arrangement, with their distinct historical spare-status remarks preserved in the variant notes.
- Before installing rubber bushing item 5 (1124 792 5505), coat it with installing fluid OH 723, 0781 957 9000. First insert brass bushing item 4 (1124 792 5500) into the rubber bushing. Then fit both into the hand-guard bearing boss, with the brass-bushing flange facing inward, and secure with screw item 3.
- Drawing 137TI051 KN labels guard assemblies 1, 7, 9 and mounting items 3, 5, 4. Page 1 expressly requires the new bushings and screw also for previous types of hand guards; do not limit that service instruction to post-changeover production.
- No screw torque, brake-function test or complete chain-brake repair procedure is specified here. The diagram is mounting evidence, not evidence of interchange between 064, 064 R, 066/M and 066 R guard shapes.
- Historical TI52/1999 instructions and spare-availability statements are not present stock or physical interchange verification. Base-model catalog sheets are navigation anchors; printed R/M variant restrictions remain controlling. No applicability to MS 640, MS 650 or MS 660 is inferred.
Source: TI 52/1999, p. 1 · TI 52/1999, p. 2 — Section 1 complete service procedure, drawing and hardware rows.
Part numbers (4)
- 9022 341 1090 — Spline screw IS M5 x 40 x 25Revised mounting item 3 · 064 / 066 front-hand-guard mounting described in section 1
- 1124 792 5500 — Brass bushingItem 4; flange inward · 064 / 066 front-hand-guard mounting described in section 1
- 1124 792 5505 — Rubber bushingItem 5; lubricate before fitting · 064 / 066 front-hand-guard mounting described in section 1
- 0781 957 9000 — Installing fluid OH 723Rubber-bushing installation lubricant · 064 / 066 front-hand-guard mounting described in section 1
Service note · 064 / 066
064 / 066 brake spring: same-number revision at X 31 815 798
TI calls it a higher spring; no dimension or spring-force value is specified.
X 31 815 798 — 064 / 066 crankcase, cover mounting and brake-spring revisions in TI27/1995; model-conditioned production change, not a universal compatibility boundary.
- From X 31 815 798, the TI says A HIGHER SPRING 1121 160 5500 will be installed. The scan confirms this exact wording; it does not say higher-strength and gives no height, wire diameter, rate or force. Preserve the ambiguity rather than converting it into an unsupported specification.
- Summary item1 Brake spring lists 1121 160 5500 as BOTH ORIGINAL AND NEW. Remark1 says only the MODIFIED VERSION is factory available. Part-number equality is not proof that physical revisions are identical; no marking method is provided.
- The spring row has a BLANK MOQ and no distinct replacement number. The TI gives no explicit standalone retrofit instruction or matched spring-and-cover kit rule. The crankcase and spring share a cutoff, but that alone does not prove or disprove a mandatory retrofit pairing.
- Later 064 E and 066 E AV-system sheets each list 1121 160 5500 at key11 as Tension spring. These are the exact available assembly bindings for this brake-spring note, not evidence that the spring is an AV mount. Shared number usage on other saws does not extend this 064/066 revision to them.
- Footer May 11, 1995, D1/MTK-al. Last TIs 10/1995 for 064 and 19/1995 for 066 are bibliographic, not additional page requirements or supersession claims.
- Historical TI guidance for the named models and stated versions only. Shared IPL sheets or series do not extend applicability to other variants or successor models. Supply statements are historical, not present stock guarantees or verified physical interchange. No hardware operation was performed.
Source: TI 27/1995, p. 2 — Section2 prose, summary, remark and footer.
Part numbers (1)
- 1121 160 5500 — Brake spring (later IPL: tension spring)same-number revision; modified-only factory supply · 064 / 066; Section2 prose, summary, remark and footer
Wrong number or missing part for the 066? Report a correction →