Stihl 1122 · Section F · 6 of 17 · 25 parts
Chain sprocket cover
Fits 066.
Historical fitment & changes (5) — includes parts and conditions not shown on this drawing.
Parts (25)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1122 640 1707 | Chain sprocket cover | 1 |
| 2 | 1125 640 1701 | Chain sprocket cover Fitment / change note → → replaced by 1122 640 1702, 1128 640 1706 TI 36/2000 | 1 |
| 3 | 1125 656 1501 | Guard | 1 |
| 4 | 1121 648 6610 | Bumper strip | 2 |
| 5 | 1122 664 0500 | Bumper spike | 1 |
| 6 | 1122 664 0503 | Bumper spike | 1 |
| 7 | 1122 664 0501 | Bumper spike | 1 |
| 8 | 1122 664 0505 | Bumper spike | 1 |
| 9 | 1122 664 0508 | Bumper spike | 1 |
| 10 | 1122 664 0506 | Bumper spike | 1 |
| 11 | 9022 341 0960 | Spline screw IS-M5x12 → replaced by 9022 341 0980 TI 3/2006 | 1 |
| 12 | 9214 320 0700 | Lock nut M5 Fitment / change note → | 1 |
| 13 | 1122 656 7700 | Chain catcher | 1 |
| 14 | 9022 341 1019 | Spline screw IS-M5x20 | 1 |
| 15 | 9008 319 0960 | Hexagon head screw M5x12 | 2 |
| 16 | 9214 320 0700 | Lock nut M5 Fitment / change note → | 2 |
| 17 | 1122 648 0401 | Chain sprocket cover Fitment / change note → → replaced by 1122 648 0403 TI 15/2007 | 1 |
| 18 | 1122 656 1510 | Guard Fitment / change note → | 1 |
| 19 | 1122 650 7700 | Chain catcher Fitment / change note → | 1 |
| 20 | 1122 656 6600 | Sleeve Fitment / change note → | 1 |
| 21 | 9214 320 0700 | Lock nut M5 Fitment / change note → | 1 |
| 22 | 1122 640 8300 | Bumper strip | 1 |
| 23 | 9022 341 1019 | Spline screw IS-M5x20 | 1 |
| 24 | 0000 955 0801 | Hexagon nut M8 | 2 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1122 640 1701 | Chain sprocket cover Fitment / change note → | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Conditional replacement · 044 / 064 / 066
044 / 064 / 066: sprung side plate requires the revised cover
Side plate 1128 664 1001 changes to 1128 664 1002; new plate installation requires the matching new cover. The general cover row changes 1125 640 1700 to 1125 640 1701.
- When fitting the revised sprung-tab side plate during a repair, the new-version chain sprocket cover must also be fitted. The tabs hold the guide bar during chain assembly; this is not approval to use the new plate with the original cover.
- The separate 1122-group cover row applies ONLY to 044 and 066 with wrap-around handles. It does not extend that cover to 064 or every 044/066.
- Original side plates remain available for original covers/older machines in this bulletin. Original covers are supplied only while existing stocks last; these are historical availability statements.
- The source identifies new covers by integrally cast numbers 1122 648 0401 and 1125 648 0404. These are identification marks, not the 640-group cover ordering numbers or established ordering aliases. The prose does not explicitly pair each cast number to a summary row.
- The illustrated installation removes the M4x8 pan-head screw and old plate, pushes the new plate over the bar studs, then seats it using a combination wrench and one short blow with a plastic mallet.
- For the FIRST installation of a new side plate, the source says to mount the guide bar and cover and tighten the M8 nuts to about 15–20 Nm (11–15 lbf.ft). This historical seating step is not a universal torque specification for later models or normal recurring bar adjustment.
- Illustrated removal fits an M8 nut to the rear bar stud, twists the combination-wrench screwdriver end about 45° counterclockwise under the plate, raises the wrench end about 10–15 mm (1/2 in), then removes the nut and plate. Preserve the illustrated orientation; no hardware operation is verified here.
- Pan-head screw 9041 216 0630 is omitted in the revised arrangement, not globally discontinued: the summary says it remains a spare for other models.
- Introduction is in progress, dated May 17, 1994, without a numeric serial cutoff. The seven explicitly named models do not establish applicability to successors, 046, or unlisted variants. Prior-TI references are bibliography, not inherited compatibility.
Source: TI 12/1994, p. 1 · TI 12/1994, p. 2 · TI 12/1994, p. 3 · TI 12/1994, p. 4 — Cover/side-plate service note, assembly/disassembly and model-qualified summary.
Part numbers (7)
- 1128 664 1001 — Original side platePrevious version · Retained for original cover
- 1128 664 1002 — Sprung-tab side plateNew version · Requires new-version cover
- 1125 640 1700 — Chain sprocket coverPrevious general cover · Historical while-stocks-last availability
- 1125 640 1701 — Chain sprocket coverNew general cover · Named models in general summary row
- 9041 216 0630 — Pan-head screw M4x8Removed from new arrangement · Still a spare for other models
- 1122 648 0401 — Integrally cast cover numberIdentification only · Not an ordering alias or explicit row mapping
- 1125 648 0404 — Integrally cast cover numberIdentification only · Not an ordering alias or explicit row mapping
Conditional replacement · 044 / 066
044 / 066 wrap-around handle: distinct revised sprocket cover
Only the 044 and 066 wrap-around-handle configurations are named for cover 1122 640 1700 → 1122 640 1701, paired with the revised side plate.
- Wrap-around handle only; not 064, ordinary-handle configurations or successor saws. The 044 catalog link is a related cover sheet, not proof that its standard-cover row depicts this wrap-around cover.
- When fitting the revised sprung-tab side plate during a repair, the new-version chain sprocket cover must also be fitted. The tabs hold the guide bar during chain assembly; this is not approval to use the new plate with the original cover.
- The separate 1122-group cover row applies ONLY to 044 and 066 with wrap-around handles. It does not extend that cover to 064 or every 044/066.
- Original side plates remain available for original covers/older machines in this bulletin. Original covers are supplied only while existing stocks last; these are historical availability statements.
- The source identifies new covers by integrally cast numbers 1122 648 0401 and 1125 648 0404. These are identification marks, not the 640-group cover ordering numbers or established ordering aliases. The prose does not explicitly pair each cast number to a summary row.
- The illustrated installation removes the M4x8 pan-head screw and old plate, pushes the new plate over the bar studs, then seats it using a combination wrench and one short blow with a plastic mallet.
- For the FIRST installation of a new side plate, the source says to mount the guide bar and cover and tighten the M8 nuts to about 15–20 Nm (11–15 lbf.ft). This historical seating step is not a universal torque specification for later models or normal recurring bar adjustment.
- Illustrated removal fits an M8 nut to the rear bar stud, twists the combination-wrench screwdriver end about 45° counterclockwise under the plate, raises the wrench end about 10–15 mm (1/2 in), then removes the nut and plate. Preserve the illustrated orientation; no hardware operation is verified here.
- Pan-head screw 9041 216 0630 is omitted in the revised arrangement, not globally discontinued: the summary says it remains a spare for other models.
- Introduction is in progress, dated May 17, 1994, without a numeric serial cutoff. The seven explicitly named models do not establish applicability to successors, 046, or unlisted variants. Prior-TI references are bibliography, not inherited compatibility.
Source: TI 12/1994, p. 1 · TI 12/1994, p. 2 · TI 12/1994, p. 3 · TI 12/1994, p. 4 — Cover/side-plate service note, assembly/disassembly and model-qualified summary.
Part numbers (7)
- 1128 664 1001 — Original side platePrevious version · Retained for original cover
- 1128 664 1002 — Sprung-tab side plateNew version · Requires new-version cover
- 1122 640 1700 — Wrap-around-handle chain sprocket coverPrevious general cover · 044/066 wrap-around handles only
- 1122 640 1701 — Wrap-around-handle chain sprocket coverNew general cover · 044/066 wrap-around handles only
- 9041 216 0630 — Pan-head screw M4x8Removed from new arrangement · Still a spare for other models
- 1122 648 0401 — Integrally cast cover numberIdentification only · Not an ordering alias or explicit row mapping
- 1125 648 0404 — Integrally cast cover numberIdentification only · Not an ordering alias or explicit row mapping
Service note · 064 / 066
064 / 066: wrap-around chain catcher supplied as an assembly
Revised sleeve material accompanies assembly-only service supply and a new cover number.
- ONLY versions with wrap-around handle. New chain catcher assembly 1122 650 7700 replaces separate supply of collar stud, sleeve, retaining ring and nut. The sleeve uses a better-grade material intended to improve strength; this is a source design claim, not a measured result.
- Chain sprocket cover 1122 640 1700 changes to 1122 640 1701 and includes catcher assembly item 1; the assembly includes items 2–5. Original cover remains factory-supplied only until existing stocks are exhausted. New versions of the four internal components are NOT available separately; the printed -*- entries are not replacement part numbers.
- The original component rows are collar stud 1122 656 6801 (2), sleeve 1122 656 6600 (3), retaining ring 9452 621 0140 (4), locknut VM5 9214 320 0700 (5), matching the exploded illustration. Do not offer these original numbers as separately available revised components.
- This TI applies its 064/066 heading to the wrap-around-only section. Retain that source scope independently of TI12/1994, whose separate cover row names 044/066 wrap-around versions. Neither source grants universal cover or side-plate interchange; the differing source scopes are not silently reconciled.
- TI08/1994 names historical 064 and 066, series 1122, not later MS models. All six changes are in progress; no numeric serial cutoff is supplied. Publication date is January 31, 1994; 08.94 is the bulletin identifier, not an August production date. MOQ columns are commercial order quantities, not installed counts. No physical interchange test was performed.
Source: TI 8/1994, p. 2 · TI 8/1994, p. 3 — wrap-around chain catcher supplied as an assembly.
Part numbers (7)
- 1122 640 1700 — Chain sprocket coveroriginal; while stocks last · wrap-around chain catcher supplied as an assembly
- 1122 640 1701 — Chain sprocket cover including catchernew version · wrap-around chain catcher supplied as an assembly
- 1122 650 7700 — Chain catcher including items 2–5new assembly · wrap-around chain catcher supplied as an assembly
- 1122 656 6801 — Collar stud, key 2original internal component · wrap-around chain catcher supplied as an assembly
- 1122 656 6600 — Sleeve, key 3original internal component · wrap-around chain catcher supplied as an assembly
- 9452 621 0140 — Retaining ring, key 4original internal component · wrap-around chain catcher supplied as an assembly
- 9214 320 0700 — Locknut VM5, key 5original internal component · wrap-around chain catcher supplied as an assembly
Service note · 064 / 066
064 / 066: reinforced hand guard and lower-force brake lever
Both hand-guard numbers remain unchanged; the old lever remains available for other models.
- Additional stiffening ribs reinforce the clutch-side arm of front hand guards 1122 792 9101 and 1122 792 9106. Both numbers remain unchanged; only modified hand guards are available from the factory. The shortened prose notation 9101/06 refers to the two fully printed summary rows, not a third number.
- Lever 1121 160 5000 is replaced by 1128 160 5000 for this modification, intended to reduce chain-brake activation force. Original lever remains available for OTHER models. The bulletin gives neither a numerical force target nor a general cross-model compatibility or brake-test procedure. Section 4 is not labeled wrap-around-only; do not inherit the restriction from section 3.
- TI08/1994 names historical 064 and 066, series 1122, not later MS models. All six changes are in progress; no numeric serial cutoff is supplied. Publication date is January 31, 1994; 08.94 is the bulletin identifier, not an August production date. MOQ columns are commercial order quantities, not installed counts. No physical interchange test was performed.
Source: TI 8/1994, p. 3 — reinforced hand guard and lower-force brake lever.
Part numbers (4)
- 1122 792 9101 — Front hand guardunchanged number; reinforced version · reinforced hand guard and lower-force brake lever
- 1122 792 9106 — Front hand guardunchanged number; reinforced version · reinforced hand guard and lower-force brake lever
- 1121 160 5000 — Chain-brake leveroriginal; retained for other models · reinforced hand guard and lower-force brake lever
- 1128 160 5000 — Chain-brake levernew version · reinforced hand guard and lower-force brake lever
Service note · 064 / 066
064 / 066 wrap-handle versions: enlarged sprocket-cover guard
Nested cover numbers stay unchanged; guard1505 becomes1510, introduction in progress.
- Section4 applies ONLY to versions with WRAP-AROUND HANDLE. Guard1122 656 1510 replaces1122 656 1505 in chain sprocket cover1122 640 1701; enlargement is intended to improve durability, not measured project performance.
- Table hierarchy: assembly1122 640 1701 INCLUDES item2 cover1122 648 0401, which INCLUDES item3 guard. Both cover numbers are unchanged; all other parts remain as before. Do not collapse the two cover levels or treat the guard as a complete cover.
- Introduction is IN PROGRESS with no serial cutoff. Only modified cover versions are factory supplied (remark1); old guard is no longer factory supplied (remark2). Do not borrow the nameplate, tank or filter serials. Drawing137TI018 locates the guard, without a mounting torque or unlisted fastener.
- Historical TI08/1997 evidence for the stated 064/066 configurations only. Independent modification cutoffs are not whole-model identification ranges, current stock claims or blanket retrofit permission. No MS640/MS660 successor scope or tested physical interchange is inferred. No hardware operation was performed.
Source: TI 8/1997, p. 3 · TI 8/1997, p. 4 — 064 / 066 wrap-handle versions: enlarged sprocket-cover guard.
Part numbers (4)
- 1122 640 1701 — Complete chain sprocket cover, includes item2Unchanged assembly number · 064 / 066; only the described configuration
- 1122 648 0401 — Chain sprocket cover, includes guard item3Unchanged subassembly number · 064 / 066; only the described configuration
- 1122 656 1505 — Original guardReplaced; no longer factory supplied · 064 / 066; only the described configuration
- 1122 656 1510 — Enlarged guardNew version; wrap-handle scope · 064 / 066; only the described configuration
Wrong number or missing part for the 066? Report a correction →