← 021/023/025 · MS 210/230/250

Stihl 1123 · Section F · 6 of 19 · 12 parts

Oil pump

Fits 021, 023, 025.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101123456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (12)

PosPart numberDescriptionQty
1 1123 647 9400 Hose 1
2 1123 640 3800 Pickup body 1
3 1123 640 3200 NLA Oil pump 0.55 1
3 1123 640 3201 Oil pump 0.65 1
4 1123 640 2901 Connector 1
5 9646 945 0355 O-ring 6.1x1.6 1
6 9074 478 4130 Pan head self-tapping screw IS-P5x16 1
7 1123 640 2900 Connector Fitment / change note → → replaced by 1123 640 2901, 1123 640 2901 TI 5/2002 1
8 9646 945 0350 O-ring 6.07x1.78 Fitment / change note → 1
9 9075 478 3015 Pan head self-tapping screw IS-D4x15 4
10 1123 640 7102 Worm 1
11 1123 647 2400 Spring 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · 021 / 023 / 025

021 / 023 / 025: oil connector keeps its number as O-ring changes

Connector 1123 640 2900 does not distinguish old and modified O-ring configurations by number alone.

  • Original O-ring 9646 945 0340 is 6 x 1.5; new 9646 945 0350 is 6.07 x 1.78, printed as O-ring dimensions. Source gives no material/hardness or installation lubricant. Diagram arrow locates the ring at the oil-pump connector; it is not a torque or leak-test procedure.
  • Connector including item 1 is numbered 1123 640 2900 in BOTH original and new columns. Unmodified connector version continues to be supplied until existing factory stocks are exhausted (remark 1). A connector number alone therefore cannot establish which ring is included.
  • Old 6 x 1.5 ring remains available for OTHER MODELS (remark 2), not unconditional substitute approval here. New ring MOQ H 10 is an ordering minimum, not installation quantity. Introduction is in progress; no serial cutoff or fitted-machine changeover date printed.
  • Last TI on 021/023/025 is cited as 26.94, a historical cross-reference, not a new fitment assertion. Footer: Waiblingen October 6, 1994, D1/MTK-st, Andreas Stihl Technical Documentation; publication date is not a production cutoff.
  • Historical TI 38/1994; modifications described as “in progress”, not a serial cutoff. Factory supply statements are historical, not current stock. No hardware operation was performed.

Source: TI 38/1994, p. 4 — 021 / 023 / 025: oil connector keeps its number as O-ring changes.

Part numbers (3)
  • 1123 640 2900 — Connector; same number before and after O-ring revisionhistorical listed item · 021 / 023 / 025: oil connector keeps its number as O-ring changes
  • 9646 945 0340 — Original O-ring 6 x 1.5historical listed item · 021 / 023 / 025: oil connector keeps its number as O-ring changes
  • 9646 945 0350 — New O-ring 6.07 x 1.78historical listed item · 021 / 023 / 025: oil connector keeps its number as O-ring changes

Wrong number or missing part for the 021, 023, 025? Report a correction →