← 021/023/025 · MS 210/230/250

Stihl 1123 · Section K · 10 of 19 · 24 parts

Ignition system

Fits 021, 023, 025.

Parts diagrams →

Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111213141515161717181819192202021212222233456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (24)

PosPart numberDescriptionQty
1 1123 400 1203 Flywheel Fitment / change note → 1
2 0000 955 0802 Collar nut M8x1 1
3 0000 400 1306 Ignition module Fitment / change note → 1
4 0000 448 1203 Lead retainer 1
5 0000 448 1200 Lead retainer 1
6 1123 440 2200 Ground wire 1
7 9291 021 0121 Washer 5.3 2
8 1123 442 0401 Insulating hose 1
9 9075 478 4155 Pan head self-tapping screw IS-D5x24 4
10 1128 405 1000 Spark plug boot 1
11 0000 998 0604 Torsion spring 1
12 1123 440 3001 Wiring harness 1
13 1123 440 3010 Wiring harness 1
14 0751 030 8957 Terminal socket 4.8-1/0.8 no longer available from factory 1
15 0751 030 8957 Terminal socket 4.8-1/0.8 no longer available from factory 2
16 not sold separately Terminal socket not available as a separate item 1
17 0751 030 8950 NLA Terminal socket A 4-1 no longer available from factory 1
18 1123 442 0400 Shrink-on tube 1
19 0000 989 0814 Grommet 1
20 0751 030 8955 Terminal socket 4.8-1/0.4 no longer available from factory 1
21 not sold separately Lead 160 mm / 6.3'' not available as a separate item 1
22 not sold separately Lead 250 mm / 9.8'' not available as a separate item 1
23 9075 478 3015 Pan head self-tapping screw IS-D4x15 1
Not numbered on the diagram — assemblies, kits and options
— 0751 010 1110 Lead 10 m / 33' not illustratedoption 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · 021 / 023 / 025

021 / 023 / 025: series 1123 replacement ignition assignment

0000 400 1306 and the listed flywheel pairing for series 1123; 165 mm ignition lead.

  • Listed configuration: 0000 400 1306 with flywheel 1123 400 1203.
  • Printed ignition-lead length: 165 mm (6 1/2 in). Preserve the printed metric and inch values; no rounding correction is inferred.
  • TI01/1999 lists replacement combinations for the then-current machines, not every earlier configuration. Older machines are referred to Spare Parts for Previous Models in their own illustrated parts lists; no serial cutoff is supplied here.
  • Use only the listed ignition-module/flywheel combinations. The source warns that incorrect combinations can cause excessive RPM or running in reverse; sharing a module number does not make all flywheels interchangeable.
  • Universal replacement modules may differ from production modules in maker, shape and part number. The source describes installation/function compatibility within its assignments, not universal compatibility or a project hardware test.
  • Some replacement modules require shortening the ignition lead and/or short-circuit wire and crimping a different short-circuit connector. The table gives ignition-lead lengths only; it supplies neither a short-circuit-wire length nor a connector part number. Do not infer that every row needs modification.
  • Only the named models and printed series are covered. A shared IPL sheet does not extend this assignment to unnamed models or modern MS equivalents. This 1999 USA bulletin is historical guidance, not current availability.

Source: TI 1/1999, p. 1 · TI 1/1999, p. 2 — 1.1 general restrictions and 1.2.1 chainsaw assignments.

Part numbers (2)
  • 0000 400 1306 — Replacement ignition moduleAssigned replacement · 021 / 023 / 025, series 1123, only with the listed flywheel branch
  • 1123 400 1203 — Listed configuration flywheelRequired pairing · 021 / 023 / 025, series 1123; listed configuration only

Service note · 021 / 023 / 025

021 / 023 / 025: spark-plug terminal dust cover no longer required

Cover deletion does not delete the spark-plug terminal itself.

  • Dust cover 1128 084 1400 on the spark-plug terminal has been deleted from production and need NOT be refitted after service. The cover remains factory-available for OTHER models; no other model names are supplied.
  • This is a dust-cover change, not permission to omit the terminal or its electrical connection. Introduction in progress, with no serial stated.
  • Historical TI 13/1994 guidance for the explicitly named models only; no successor or unlisted variant applicability inferred. Factory supply statements are historical, not current stock claims. MOQ columns are order quantities, not fitting quantities. No physical interchange test was performed.

Source: TI 13/1994, p. 4 — 021 / 023 / 025: spark-plug terminal dust cover no longer required.

Part numbers (1)
  • 1128 084 1400 — Spark-plug terminal dust covernot refitted for cover models; retained for other models · 021 / 023 / 025: spark-plug terminal dust cover no longer required

Wrong number or missing part for the 021, 023, 025? Report a correction →