← 021/023/025 · MS 210/230/250

Stihl 1123 · Section J · 9 of 19 · 13 parts

Muffler

Fits 021, 023, 025.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112121323456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (13)

PosPart numberDescriptionQty
1 1123 148 1201 Screw M5x65 2
2 1123 141 3200 Cooling plate 1
3 1123 149 0500 Gasket 1
4 1123 140 0608 Muffler 1
5 1123 140 0602 Muffler 1
6 1123 140 0607 Muffler 1
7 1123 145 0607 Cover plate 1
8 1123 141 9001 Screen 1
9 1123 140 0605 Muffler 1
10 1123 145 0800 Exhaust casing 1
11 1123 145 0600 Cover plate 1
12 9216 263 0700 Hexagon nut M5 Fitment / change note → → replaced by 9220 260 0701 TI 25/1994 2
13 1123 141 9000 Screen 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · 021 / 023 / 025

021 / 023 / 025: muffler flange locknut changes at its own cutoff

New M5-10 nut uses 7 Nm; the filler-cap cutoff is separate.

X 28 016 918 — Printed introduction for this component only; not a universal machine cutoff or interchange guarantee.

  • From X 28 016 918, muffler flange locknut changes from 9216 261 0700 to M5-10 nut 9216 263 0700. Tightening torque is 7 Nm (5.2 lbf.ft) for this muffler fastener, not a general M5 torque.
  • Only the new nut will be factory-supplied as a replacement; original is no longer available. Keep this component cutoff separate from the filler-cap change at X 28 020 718.
  • Historical TI 13/1994 guidance for the explicitly named models only; no successor or unlisted variant applicability inferred. Factory supply statements are historical, not current stock claims. MOQ columns are order quantities, not fitting quantities. No physical interchange test was performed.

Source: TI 13/1994, p. 3 — 021 / 023 / 025: muffler flange locknut changes at its own cutoff.

Part numbers (2)
  • 9216 261 0700 — Original muffler flange locknutno longer factory-available · 021 / 023 / 025: muffler flange locknut changes at its own cutoff
  • 9216 263 0700 — M5-10 muffler flange locknutnew; 7 Nm · 021 / 023 / 025: muffler flange locknut changes at its own cutoff

Wrong number or missing part for the 021, 023, 025? Report a correction →