Stihl 1123 · Section L · 11 of 19 · 28 parts
Rewind starter
Fits 021, 023, 025.
Historical fitment & changes (6) — includes parts and conditions not shown on this drawing.
Parts (28)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1123 080 1802 | Fan housing | 1 |
| 2 | 1123 967 1510 | Model plate MS 210 | 1 |
| 2 | 1123 967 1511 | Model plate MS 210 C | 1 |
| 2 | 1123 967 1512 | Model plate MS 230 | 1 |
| 2 | 1123 967 1513 | Model plate MS 230 C | 1 |
| 2 | 1123 967 1514 | Model plate MS 250 | 1 |
| 2 | 1123 967 1515 | Model plate MS 250 C | 1 |
| 2 | 0000 967 1500 | Nameplate STIHL | 1 |
| 3 | 0000 967 2035 | Nameplate STIHL | 1 |
| 4 | 1110 084 9102 | Bushing Fitment / change note → | 1 |
| 5 | 1123 084 7800 | Segment | 1 |
| 6 | 1129 190 0601 | Rewind spring | 1 |
| 7 | 1123 195 0400 | Rope rotor Fitment / change note → | 1 |
| 8 | 0000 190 3402 | Starter grip ElastoStart Ø 3 mm Fitment / change note → | 1 |
| 9 | 0000 195 7001 | Cap | 1 |
| 10 | 1121 195 3400 | Starter grip | 1 |
| 11 | 0000 195 8200 | Starter rope Ø 3x800 mm Fitment / change note → | 1 |
| 12 | 1125 195 7200 | Pawl Fitment / change note → | 1 |
| 13 | 0000 958 0923 | Washer Fitment / change note → | 1 |
| 14 | 1118 195 3500 | Spring Fitment / change note → | 1 |
| 15 | 9075 478 4155 | Pan head self-tapping screw IS-D5x24 | 4 |
| 16 | 1123 084 8201 NLA | Cover plate option | 1 |
| 17 | 9099 021 2770 | Self-tapping screw 3.9x13 option | 2 |
| 18 | 1123 084 8200 NLA | Cover plate option | 1 |
| 19 | 9075 478 2995 NLA | Pan head self-tapping screw IS-D4x12 option | 2 |
| 40 | 1123 190 2900 NLA | Starter rope Ø 3.5 mm Fitment / change note → option | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1123 080 2104 | Fan housing with rewind starter | 1 |
| — | 0000 930 2208 NLA | Starter rope Ø 3 mm x 30.5 m not illustratedoption | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · 021 / 023 / 025
021 / 023 / 025: easy-start version and market-specific valve omission
Manual primer, decompression valve and ElastoStart are the three described components, but some early easy-start saws omitted the valve.
- The source introduces easy-start VERSIONS of 021, 023, 025, not a universal replacement of all variants. Manual fuel pump (drawing 1) primes the carburetor metering chamber; the source claims about 40% fewer pulls. This is a historical claim, not a measured guarantee or a claim of 40% less pulling force.
- Decompression valve (2) is manually opened and automatically closes after firing; ElastoStart grip (3) cushions compression peaks. A NUMBER of easy-start saws up to X 30 950 036 were supplied WITHOUT a decompression valve in SOME markets. This is a qualified omission boundary, not a universal introduction cutoff or proof that every earlier saw lacks the valve.
- Only the ElastoStart retrofit is expressly authorized across all three model families on page 5. Do not treat the parts roster or this overview as approval to retrofit the entire primer/decompression system.
- Historical TI 10/1994 guidance for the named 021/023/025 variants, not MS 210/MS 230/MS 250 successors or later starting systems. Page 6 remark 1 says parts are included in other versions of 021/023; it does not independently extend that remark to 025. MOQ is a commercial order quantity, not a fitting quantity. No physical interchange test was performed.
Source: TI 10/1994, p. 1 — 021 / 023 / 025: easy-start version and market-specific valve omission.
No additional parts-table entry added.
Service note · 021 / 023 / 025
021 / 023 / 025: ElastoStart retrofit, force limiting and repair boundary
All three model families may receive grip 1123 190 3400; repairs are limited to starter-rope replacement.
- ElastoStart comprises starter grip, integrated rubber element and rope. Small plastic plates are vulcanized to both rubber ends; two tapered plastic nipples molded to rope are spaced farther apart than relaxed rubber length but closer than stretched length. Rope between them is initially compressed inside rubber bore.
- Pulling transmits force through grip (1), rubber (2), lower nipple (3), rope (4). Opposing compression stretches rubber proportionally and cushions peaks each crankshaft revolution. After first compression stroke grip forces are described as practically uniform. Rubber cannot stretch beyond the point where internal rope is fully tensioned; load then travels through grip and UPPER nipple (5). The qualitative force/travel graph has no numeric scale: do not invent measured force reduction or eliminate the initial peak.
- Repairs are LIMITED to starter-rope replacement 1123 190 2900. Faulty ElastoStart otherwise requires a COMPLETE assembly 1123 190 3400. Detailed instructions accompany each grip/rope but are not reproduced or reviewed here. ALL 021, 023, 025 saws can be retrofitted with this ElastoStart per section 2.4; this does not authorize full primer/decompression conversion.
- Fan housing with ElastoStart 1123 080 2101 (14) includes items 15–24. Fan housing 1123 080 1801 (15) itself includes nameplate 0000 967 2032 (16) and bushing 1110 084 9102 (17). Rewind spring 1129 190 0600 (18), rope rotor 1123 195 0400 (19), pawl 1125 195 7200 (20), washer 0000 958 0923 (21), spring 1118 195 3500 (22), ElastoStart 1123 190 3400 (23) INCLUDING rope 1123 190 2900 (24) complete the roster. Nested boundaries are not individual interchange permissions.
- Items 16, 17, 19, 20, 21, 22 carry remark 1 about other 021/023 versions. Rewind spring 18 does NOT carry that remark. Last-TI 04/1993 pointer and October 10, 1994 issue date are provenance, not review of the prior TI or acceptance of a whole service manual.
- Historical TI 10/1994 guidance for the named 021/023/025 variants, not MS 210/MS 230/MS 250 successors or later starting systems. Page 6 remark 1 says parts are included in other versions of 021/023; it does not independently extend that remark to 025. MOQ is a commercial order quantity, not a fitting quantity. No physical interchange test was performed.
Source: TI 10/1994, p. 1 · TI 10/1994, p. 4 · TI 10/1994, p. 5 · TI 10/1994, p. 6 — 021 / 023 / 025: ElastoStart retrofit, force limiting and repair boundary.
Part numbers (11)
- 1123 080 2101 — Fan housing with ElastoStart, item 14includes 15–24 · 021 / 023 / 025: ElastoStart retrofit, force limiting and repair boundary
- 1123 080 1801 — Fan housing, item 15includes 16/17 · 021 / 023 / 025: ElastoStart retrofit, force limiting and repair boundary
- 0000 967 2032 — Nameplate, item 16remark 1 · 021 / 023 / 025: ElastoStart retrofit, force limiting and repair boundary
- 1110 084 9102 — Bushing, item 17remark 1 · 021 / 023 / 025: ElastoStart retrofit, force limiting and repair boundary
- 1129 190 0600 — Rewind spring, item 18new roster; no remark 1 · 021 / 023 / 025: ElastoStart retrofit, force limiting and repair boundary
- 1123 195 0400 — Rope rotor, item 19remark 1 · 021 / 023 / 025: ElastoStart retrofit, force limiting and repair boundary
- 1125 195 7200 — Pawl, item 20remark 1 · 021 / 023 / 025: ElastoStart retrofit, force limiting and repair boundary
- 0000 958 0923 — Washer, item 21remark 1 · 021 / 023 / 025: ElastoStart retrofit, force limiting and repair boundary
- 1118 195 3500 — Spring, item 22remark 1 · 021 / 023 / 025: ElastoStart retrofit, force limiting and repair boundary
- 1123 190 3400 — ElastoStart, item 23includes 24; all 021/023/025 retrofit · 021 / 023 / 025: ElastoStart retrofit, force limiting and repair boundary
- 1123 190 2900 — Starter rope, item 24only permitted grip repair · 021 / 023 / 025: ElastoStart retrofit, force limiting and repair boundary
Service note · 021 / 023 / 025
021 / 023 / 025: unhoused rewind spring uses a temporary sheetmetal holder
Discard holder only after installation; starter cutoff differs from brake cutoff.
X 28 854 943 — Printed component-specific introduction, not a universal machine cutoff or unrestricted interchange guarantee.
- FROM X 28 854 943, rewind spring 1129 190 0600 WITHOUT HOUSING replaces 1128 190 0600 WITH HOUSING. New spare comes in SHEETMETAL HOLDER to prevent uncoiling during transport and installation; holder can be DISCARDED AFTER SPRING INSTALLATION, not before. Holder is not a permanent spring housing.
- Claimed benefits: less weight, lower cost from deleting housing, improved service friendliness; no numeric weight or price. Standard starter assembly 1123 080 2100 and easy-start 1123 080 2101 retain numbers and include spring. Old spring and unmodified assemblies only while stocks last. Do not apply brake cutoff X 28 310 255. Footer May 25,1994; TI 13.94 is bibliography.
- Retained 2012 starter sheet lists spring 1129 190 0601; this review preserves TI spring 1129 190 0600 without silently equating their revisions.
- Historical TI 26/1994 guidance only. No successor or unlisted model applicability inferred. Factory supply and warranty statements are historical, not current availability or entitlement. MOQ columns are order quantities, not fitting quantities. No physical interchange test was performed.
Source: TI 26/1994, p. 2 — 021 / 023 / 025: unhoused rewind spring uses a temporary sheetmetal holder.
Part numbers (4)
- 1128 190 0600 — Housed rewind springold; stocks only · 021 / 023 / 025: unhoused rewind spring uses a temporary sheetmetal holder
- 1129 190 0600 — Unhoused rewind springnew; temporary holder · 021 / 023 / 025: unhoused rewind spring uses a temporary sheetmetal holder
- 1123 080 2100 — Standard fan housing with startersame number · 021 / 023 / 025: unhoused rewind spring uses a temporary sheetmetal holder
- 1123 080 2101 — Easy-start fan housing with startersame number · 021 / 023 / 025: unhoused rewind spring uses a temporary sheetmetal holder
Conditional replacement · 021 / 023 / 025
021 / 023 / 025: new ElastoStart grip and smaller starter rope
Optional grip 0000 190 3402 replaces 1123 190 3400 on all three models; its included rope is 3.0 mm x 800 mm, not the old 3.5 mm rope.
- Page 1 expressly permits the new ElastoStart on all model 021, 023 and 025 chainsaws. The grip remains optional; the bulletin does not require converting every standard starter or restrict the new grip to easy-start/C variants.
- Summary item 2 is original grip 1123 190 3400 including item 3 rope 1123 190 2900, diameter 3.5 mm (0.14 inch). Item 4 is new grip 0000 190 3402 including item 5 rope 0000 195 8200, diameter 3.0 mm x 800 mm (0.12 inch x 31.5 inch). No old-rope length is printed. These are two design-specific grip/rope pairs, not evidence that their ropes interchange.
- Fan housing with rewind starter 1123 080 2101 retains its number in both Previous and New columns. Item 1 literally says including items 2 to 5, a summary spanning original and replacement alternatives; it is not a packing list proving both grips and both ropes are fitted or supplied together. The unchanged number alone does not identify the installed grip design.
- Remark 1: only the modified version of the complete starter is available from the factory. Remark 2: the previous grip is supplied only until existing stocks are exhausted. Remark 3: the previous 3.5 mm rope remains available as a spare for older machines. Do not collapse these three different supply statements into one supersession or current availability rule.
- The retained exact-model 2012 rewind-starter sheet lists new grip 0000 190 3402 at position 8, new rope 0000 195 8200 at 11 and old rope 1123 190 2900 at 40. It lists complete starter 1123 080 2104, whereas this TI retains 1123 080 2101. No 2101-to-2104 interchange or intervening change is established. Successor model plates on that sheet do not widen the TI model scope.
- Historical TI11/1999 for all model 021, 023 and 025 chainsaws. The original heading and repeated fitment statements are not limited to C variants, despite the extracted catalog title. No MS 210/MS 230/MS 250 successor or other ElastoStart design is admitted. Modification introduction is in progress; no serial or exact introduction date is supplied. Availability statements describe factory supply in 1999, not current stock. No physical interchange test was performed.
Source: TI 11/1999, p. 1 · TI 11/1999, p. 2 — Both complete original USA pages: all-model optional fitment, force graph, construction, installation/replacement and five-row summary with remarks.
Part numbers (5)
- 1123 080 2101 — Fan housing with rewind starter; item 1Number unchanged; modified version only, remark 1 · 021, 023 and 025; TI11/1999 design and rope conditions apply
- 1123 190 3400 — Original ElastoStart grip; item 2Includes old rope item 3; stocks-exhausted limit, remark 2 · 021, 023 and 025; TI11/1999 design and rope conditions apply
- 1123 190 2900 — Original starter rope diameter 3.5 mm; item 3Spare for older machines, remark 3; old-grip pairing · 021, 023 and 025; TI11/1999 design and rope conditions apply
- 0000 190 3402 — New ElastoStart grip; item 4Includes new rope item 5; optional retrofit on all three models · 021, 023 and 025; TI11/1999 design and rope conditions apply
- 0000 195 8200 — New starter rope diameter 3.0 mm x 800 mm; item 5Included in new grip; no old-rope interchange established · 021, 023 and 025; TI11/1999 design and rope conditions apply
Service note · 021 / 023 / 025
021 / 023 / 025: coil-spring ElastoStart construction
The new grip cushions starting loads through a coil spring, sleeve and two washers; the force graph is qualitative, not a measured reduction percentage.
- Figure 000TI033 ST identifies grip 1, cap 2, sleeve 3, coil spring 4, lower washer 5, starter rope 6 and upper washer 7. Sleeve, spring and washers are contained inside the grip at rest. These drawing labels are not order numbers, spare-part availability or a complete disassembly instruction.
- During starting the user load travels from grip 1 through lower washer 5, coil spring 4, upper washer 7 and sleeve 3 to rope 6. Preserve this coil-spring construction; the older rubber-element ElastoStart description must not silently be applied to the new grip.
- Figure 000TI034 ST plots tensile force F in the grip against time t, comparing without ElastoStart with ElastoStart MIDI. The source says peak forces, especially after the first compression stroke, become almost uniform. There are no numeric axis scales or percentage reduction; no measured force, time, spring rate, recoil-spring setting or guarantee of eliminating the initial peak is inferred.
- Historical TI11/1999 for all model 021, 023 and 025 chainsaws. The original heading and repeated fitment statements are not limited to C variants, despite the extracted catalog title. No MS 210/MS 230/MS 250 successor or other ElastoStart design is admitted. Modification introduction is in progress; no serial or exact introduction date is supplied. Availability statements describe factory supply in 1999, not current stock. No physical interchange test was performed.
Source: TI 11/1999, p. 1 · TI 11/1999, p. 2 — Both complete original USA pages: all-model optional fitment, force graph, construction, installation/replacement and five-row summary with remarks.
No additional parts-table entry added.
Service note · 021 / 023 / 025
021 / 023 / 025: ElastoStart rope knots and 4–7 mm tail
The new rope uses simple overhand knots at rotor and grip; the grip-end tail a is 4–7 mm before pulling the knot in and snapping the cap home.
- Installing ElastoStart with starter rope, figure 000TI030 KN: thread the rope through the fan-housing rope guide bush from outside, then through the rope rotor and secure it with a simple overhand knot. The source then says Procedure is then as before; it does not provide a complete starter removal, rewind-spring tensioning or functional-check sequence.
- Replacing the starter rope, figure 000TI031 KN: ease the cap from the grip and remove remaining rope from grip and rotor. Fit the ElastoStart rope in the same way as standard rope, but secure it in the grip with a simple overhand knot. End of rope a must be 4 to 7 mm (about 1/4 inch). The dimension is the free tail beyond the grip knot, not a second cut length or rewind preload.
- Pull the knot into the grip, then fit the cap so it snaps into position; the remaining procedure is again as before. The drawing shows cap removal and the knot/tail orientation. These are the TI-specific changes, not standalone complete repair instructions; no number of spring-preload turns is supplied or inferred.
- Use the new-design 0000 195 8200 rope, 3.0 mm x 800 mm, with 0000 190 3402. The old 3.5 mm rope remains a spare for older machines under the separate summary remark; that availability does not establish suitability in this new grip. No internal spring, washer or sleeve replacement number is given by this bulletin.
- Historical TI11/1999 for all model 021, 023 and 025 chainsaws. The original heading and repeated fitment statements are not limited to C variants, despite the extracted catalog title. No MS 210/MS 230/MS 250 successor or other ElastoStart design is admitted. Modification introduction is in progress; no serial or exact introduction date is supplied. Availability statements describe factory supply in 1999, not current stock. No physical interchange test was performed.
Source: TI 11/1999, p. 1 · TI 11/1999, p. 2 — Both complete original USA pages: all-model optional fitment, force graph, construction, installation/replacement and five-row summary with remarks.
Part numbers (2)
- 0000 190 3402 — New coil-spring ElastoStart gripScope of the illustrated new-design rope procedure · 021, 023 and 025; TI11/1999 design and rope conditions apply
- 0000 195 8200 — Starter rope diameter 3.0 mm x 800 mmNew grip rope; overhand knots and 4–7 mm grip-end tail · 021, 023 and 025; TI11/1999 design and rope conditions apply
Wrong number or missing part for the 021, 023, 025? Report a correction →