← 021/023/025 · MS 210/230/250

Stihl 1123 · Section M · 12 of 19 · 24 parts

Air filter

Fits 021, 023, 025.

Parts diagrams →

Historical fitment & changes (6) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111222021223456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (24)

PosPart numberDescriptionQty
1 1123 141 2000 Shim 1
2 1123 129 0900 Gasket 1
3 1123 120 0605 Carburetor WT-215 1
3 1123 120 0615 NLA Carburetor WT-286A 1
3 1123 120 0614 Carburetor WT-503A 1
3 1123 120 0610 Carburetor WT-283C 1
3 1123 120 0616 Carburetor WT-498A 1
3 not sold separately Carburetor C1Q-S11G no longer available from factory 1
4 1123 123 7500 Grommet Fitment / change note → → replaced by 1123 123 7502 TI 28/1997 1
4 1123 123 7502 Grommet Fitment / change note → 1
5 not sold separately Filter housing not available as a separate item 1
6 1123 120 1612 Air filter 1
7 1123 120 1613 NLA Air filter, flocked Fitment / change note → 1
8 9216 261 0700 Hexagon nut M5 Fitment / change note → 2
9 1123 185 2000 Choke rod 1
10 1123 140 1900 Carburetor box cover Fitment / change note → 1
11 1123 141 2300 Twist lock 1
12 0000 967 3605 Warning pictogram Filler cap 1
20 1123 124 0800 Air filter 1
21 1123 120 1620 Air filter Fitment / change note → 1
21 1123 120 1623 Air filter 1
22 1123 141 8300 Slotted nut Fitment / change note → 2
Not numbered on the diagram — assemblies, kits and options
— 1123 120 1650 Air filter Fitment / change note → 1
— 1123 120 1651 NLA Air filter, flocked Fitment / change note → 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · 021 / 023 / 025

021 / 023 / 025: two-piece air filter and retained spare

New filter requires a rib-free carburetor box cover; old 1620 remains an option for ribbed covers.

  • Modified standard filter has a bottom half screwed to carburetor and a snap-on top half. Larger surface area is claimed to reduce maintenance, and snap lock eases cleaning; no quantified service interval is printed. Illustration identifies old filter left and new two-piece filter right.
  • Original spare air filter 1123 120 1620 remains available alongside new 1123 120 1650. Original flocked filter 1123 120 1605 is replaced by 1123 120 1651. Do not read the generic supersession extraction as withdrawal of 1620 or as interchange without the COVER RESTRICTION.
  • New modified filter can ONLY be installed with a carburetor box cover WITHOUT RIBS. Ribbed covers were fitted up to mid-1992 on both foam-filter and box-filter machines. Calendar wording is not a precise serial cutoff; inspect actual cover configuration.
  • Historical TI 38/1994; modifications described as “in progress”, not a serial cutoff. Factory supply statements are historical, not current stock. No hardware operation was performed.

Source: TI 38/1994, p. 1 · TI 38/1994, p. 2 · TI 38/1994, p. 3 — 021 / 023 / 025: two-piece air filter and retained spare.

Part numbers (4)
  • 1123 120 1620 — Retained original spare air filterhistorical listed item · 021 / 023 / 025: two-piece air filter and retained spare
  • 1123 120 1650 — New two-piece air filterhistorical listed item · 021 / 023 / 025: two-piece air filter and retained spare
  • 1123 120 1605 — Original flocked filterhistorical listed item · 021 / 023 / 025: two-piece air filter and retained spare
  • 1123 120 1651 — New flocked filterhistorical listed item · 021 / 023 / 025: two-piece air filter and retained spare

Service note · 021 / 023 / 025

021 / 023 / 025: filter installation and cover-rib restriction

Both retrofit paths specify 2 Nm; deburring protects filter fabric in the small clearance.

  • Foam-filter machine: unscrew nuts, remove filter housing (illustration 1), fit modified filter (2), refit nuts and tighten to 2 Nm (1.5 lbf.ft). Box-filter machine: remove box filter, unscrew nuts from studs, fit modified filter, refit nuts to the SAME 2 Nm. Both paths require section 1.2.3 cover check; 2 Nm is not a universal M5 torque.
  • Three historical repair options for ribbed covers: (a) retain ribbed cover and fit old spare 1123 120 1620; (b) fit a cover WITHOUT RIBS with modified filter; (c) remove existing cover ribs with side cutters, pliers or other suitable tool, then CAREFULLY DEBURR. The source provides no replacement-cover part number.
  • Deburring is essential to avoid damaging filter fabric when cover is fitted. Source and installed-position drawing show only a FEW MILLIMETERS between top edge of filter and cover, not a numeric clearance specification. No authorization to retain obstructing ribs, omit deburring or force the cover into place is implied.
  • Historical TI 38/1994; modifications described as “in progress”, not a serial cutoff. Factory supply statements are historical, not current stock. No hardware operation was performed.

Source: TI 38/1994, p. 1 · TI 38/1994, p. 2 — 021 / 023 / 025: filter installation and cover-rib restriction.

Part numbers (1)
  • 1123 120 1620 — Old filter option retaining ribbed coverhistorical listed item · 021 / 023 / 025: filter installation and cover-rib restriction

Service note · 021 / 023 / 025

021 / 023 / 025: filter-kit contents and supply distinctions

Old kit and flocked filter are withdrawn, while selected old components remain available.

  • Old air-filter kit 1123 007 1007 includes items 1–3 and has NO new kit number; factory supply ended (remark 1). Item 1 original filter 1123 120 1620 is shown opposite new 1123 120 1650; original remains for older machines (remark 2). New filter includes item 4. MOQ H 1 is an ordering quantity, not an installation count.
  • Item 2 slotted nut 1123 141 8300 has no new number; remains for older machines (remark 2). Item 3 hexagon nut M5 9210 260 0700 has no new number; remains for OTHER MODELS (remark 3), not a general approval on the modified filter. New item 4 flange nut 9216 261 0700 has MOQ H 10; ten is NOT the number fitted.
  • Flocked filter 1123 120 1605 → 1123 120 1651, including item 4; old version no longer supplied from factory, MOQ H 1 for new. Dashes in the new-number column are not free interchange or an invented replacement. Cover without ribs is still required for modified filters.
  • Historical TI 38/1994; modifications described as “in progress”, not a serial cutoff. Factory supply statements are historical, not current stock. No hardware operation was performed.

Source: TI 38/1994, p. 3 — 021 / 023 / 025: filter-kit contents and supply distinctions.

Part numbers (8)
  • 1123 007 1007 — Old air-filter kit; factory supply endedhistorical listed item · 021 / 023 / 025: filter-kit contents and supply distinctions
  • 1123 120 1620 — Original air filter retained for older machineshistorical listed item · 021 / 023 / 025: filter-kit contents and supply distinctions
  • 1123 120 1650 — New air filter including flange nuthistorical listed item · 021 / 023 / 025: filter-kit contents and supply distinctions
  • 1123 141 8300 — Slotted nut retained for older machineshistorical listed item · 021 / 023 / 025: filter-kit contents and supply distinctions
  • 9210 260 0700 — M5 hexagon nut retained for other modelshistorical listed item · 021 / 023 / 025: filter-kit contents and supply distinctions
  • 9216 261 0700 — New flange nut; MOQ10historical listed item · 021 / 023 / 025: filter-kit contents and supply distinctions
  • 1123 120 1605 — Old flocked air filter; factory supply endedhistorical listed item · 021 / 023 / 025: filter-kit contents and supply distinctions
  • 1123 120 1651 — New flocked filter including flange nuthistorical listed item · 021 / 023 / 025: filter-kit contents and supply distinctions

Service note · 021 / 023 / 025

021 / 023 / 025: fleece filter under unchanged numbers

Fleece replaces flocked wire cloth; old stock, cleaning direction and replacement limits remain distinct.

  • TI38/1996 replaces flocked wire cloth with fleece under UNCHANGED replacement-part numbers. Introduction is IN PROGRESS, without a serial cutoff. Remark 1 says the unmodified version is supplied until existing stocks are exhausted. A number alone therefore does not identify the material of an old-stock filter; this is a historical supply statement, not a current stock guarantee.
  • The 021/023/025 assembly 1123 120 1651 INCLUDES item 1, 1123 120 1613. Both carry remark 1. Preserve assembly versus included component; do not invent further kit contents.
  • The later 2012 IPL still labels these exact numbers FLOCKED. Preserve that wording beside the 1996 fleece announcement rather than rewriting the original catalog rows or treating the later label as proof that the TI did not occur. No material can be identified from that label/number alone.
  • The source calls fleece especially suitable for dry and dusty conditions. Its rougher surface may look heavily contaminated when only lightly loaded; appearance alone does not establish loading. Clean DAILY OR when there is a noticeable loss of power during cutting. The observation about appearance does not cancel that interval.
  • If possible, carefully blow out at LOW PRESSURE from the CLEAN AIR SIDE. For stubborn dirt or caked fleece, wash in a clean, NON-FLAMMABLE solution, for example warm soapy water. DO NOT CLEAN WITH A BRUSH: it forces dirt into the fleece. No pressure value, drying time or alternate solvent is specified.
  • The source attributes improved filtering efficiency to the material structure, not a measured result here. Some trapped particles cannot be cleaned out; replace the filter when cleaning intervals become too short for practical use, or when noticeable cutting-power loss persists after thorough cleaning.
  • Historical guidance for these named models and filter configurations only; no successor-model fitment, universal interchange or material identity inferred from a shared part number. No hardware operation was performed.

Source: TI 38/1996, p. 1 · TI 38/1996, p. 2 — Complete filter-material and servicing guidance; exact model summary rows and remarks.

Part numbers (2)
  • 1123 120 1651 — Air filter assembly including item 1unchanged assembly number · 021 / 023 / 025; TI38/1996 row and configuration conditions
  • 1123 120 1613 — Air filter, item 1included component; unchanged number · 021 / 023 / 025; TI38/1996 row and configuration conditions

Service note · 023 C / 025

023 C / 025: gray grommet with L and LA openings only

1123 123 7502 replaces7500 for the revised carburetors; old grommet remains available for older machines.

in progress — TI 28/1997 introduction status; no numeric serial cutoff or exact date supplied.

  • Section 3 replaces grommet 1123 123 7500 with 1123 123 7502. The new grommet has ONLY TWO OPENINGS, FOR L AND LA, and is COLORED GRAY for identification. Drawing 135TI005 illustrates their placement; no H-access opening or added dimension is inferred.
  • Summary item 8 carries remark 1: ORIGINAL VERSION REMAINS AVAILABLE FOR OLDER MACHINES. Replacement here does not mean globally unavailable old grommet or permission to use the two-opening grommet with every carburetor.
  • The linked 2012 shared air-filter sheet contains both exact grommet numbers; this note remains limited to 023 C/025 under TI 28. It does not extend the change to 021 or023 L merely because their catalog family is shared.
  • Modification introduction is printed as IN PROGRESS. Inventory and factory-supply statements describe 1997, not current stock. No numeric serial cutoff or verified physical interchange is implied. No hardware operation was performed.

Source: TI 28/1997, p. 2 · TI 28/1997, p. 3 — Section 3 drawing 135TI005 and summary item 8 / remark 1.

Part numbers (2)
  • 1123 123 7500 — Original grommetRemains available for older machines · Exact TI 28/1997 configuration and restrictions only
  • 1123 123 7502 — Gray grommet with L and LA openings onlyReplacement for revised carburetor configuration · Exact TI 28/1997 configuration and restrictions only

Service note · 023 C / 025

023 C / 025: L-only pictogram and replacement covers

Replacement 1123 140 1900 is supplied without pictogram; California 1910 is stock-only.

in progress — TI 28/1997 introduction status; no numeric serial cutoff or exact date supplied.

  • Section 4 says the PICTOGRAM HAS BEEN CHANGED TO REFER ONLY TO THE LOW SPEED SCREW. Drawing 135TI006 depicts that L-only instruction with the separate LA label nearby. This pictured production marking is NOT the replacement-cover supply specification: replacement covers are supplied WITHOUT PICTOGRAM.
  • The part number1123 140 1900 remains UNCHANGED. Summary item 11 (U.S. EXCEPT CALIFORNIA) lists 1900 both original and new with remark 3: ONLY MODIFIED VERSION available from factory. Item12 (CALIFORNIA) replaces 1123 140 1910 with 1123 140 1900; remark 4 supplies the original 1910 only WHILE EXISTING STOCKS LAST.
  • The prose says the California 1910 cover has been DELETED while the summary preserves temporary stock supply. Keep both statements; deletion is not immediate unavailability. Do not infer a new part number solely from missing pictogram or apply a current legal/stock claim.
  • The retained shared air-filter sheet includes exact 1900, so this cross-link is valid for the cover; it does not establish all carburetor suffixes or every model/market in that family. Footer copyright 1997 / document 6071 and last-TI references are context, not precise introduction dates.
  • Modification introduction is printed as IN PROGRESS. Inventory and factory-supply statements describe 1997, not current stock. No numeric serial cutoff or verified physical interchange is implied. No hardware operation was performed.

Source: TI 28/1997, p. 3 — Section 4/drawing 135TI006 and summary items 11–12 / remarks 3–4; introduction/footer.

Part numbers (2)
  • 1123 140 1900 — Carburetor box cover, U.S. except California / new common replacementSame number; modified version only from factory · Exact TI 28/1997 configuration and restrictions only
  • 1123 140 1910 — Original California carburetor box coverDeleted version; factory stock supplied while it lasts · Exact TI 28/1997 configuration and restrictions only

Wrong number or missing part for the 021, 023, 025? Report a correction →