Stihl 1123 · Section N · 13 of 19 · 14 parts
Air filter 023 L
Fits 023.
Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.
Parts (14)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1123 120 0611 NLA | Carburetor WT-360 Fitment / change note → | 1 |
| 1 | 1123 120 0613 NLA | Carburetor WT-396 Fitment / change note → | 1 |
| 2 | 1123 123 7502 | Grommet | 1 |
| 3 | 1123 141 2000 | Shim | 1 |
| 4 | 1123 129 0900 | Gasket | 1 |
| 5 | 1123 185 2000 | Choke rod | 1 |
| 6 | 1123 120 3400 | Filter base | 1 |
| 7 | 9210 260 0700 | Hexagon nut M5 | 2 |
| 8 | 1121 122 6600 | Collar screw | 1 |
| 9 | not sold separately | Gasket no longer available from factory | 1 |
| 10 | 1123 141 8310 | Slotted nut | 1 |
| 11 | 1123 120 1601 | Air filter | 1 |
| 12 | 1123 140 1905 | Carburetor box cover | 1 |
| 13 | 1124 140 9500 | Twist lock | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · 023
023 L market carburetors: WT 360 and WT 396 jets
WT 360 includes fixed jet 0.48; WT 396 includes fixed jet 0.46.
Later reviewed guidance: 023 L California: WT 396 carburetor assignment
- 023 L ONLY: DEPENDING ON THE MARKET, either WT 360 or WT 396 is installed. WT 360 carburetor 1123 120 0611 includes item 1, fixed jet 0.48 numbered 1123 121 5630. WT 396 carburetor 1123 120 0613 includes item 2, fixed jet 0.46 numbered 1123 121 5631. Keep the two carburetor/jet pairings distinct.
- Remark 1 marks WT 360 and its 0.48 jet as EXISTING PARTS. This table does not say WT 396 universally supersedes WT 360; no market-to-carburetor assignment, serial cutoff, jet unit, setting or permission to swap jets is specified.
- CATALOG DIFFERENCE: later shared carburetor sheet R key 3 calls its 0.48 jet 1121 121 5604, whereas the original TI page 2 clearly prints 1123 121 5630. Both identifiers are retained without inventing a supersession or treating equal 0.48 labels as proven interchange. R key 4 retains 1123 121 5631 for 0.46 and lists additional 0.44/0.42 jets not part of this TI pairing.
- Base-model 023 indexing is for navigation; the source scope remains 023 L. The shared 021/023/025 sheet label does not extend these carburetor rules to other variants.
- Historical TI guidance for the named models and stated versions only. Shared IPL sheets or series do not extend applicability to other variants or successor models. Supply statements are historical, not present stock guarantees or verified physical interchange. No hardware operation was performed.
Source: TI 29/1995, p. 2 — Section 2 complete carburetor table and existing-part remark.
Part numbers (4)
- 1123 120 0611 — Carburetor WT 360market-dependent; existing part · 023 L; Section 2 complete carburetor table and existing-part remark
- 1123 121 5630 — Fixed jet 0.48included with WT 360 per TI · 023 L; Section 2 complete carburetor table and existing-part remark
- 1123 120 0613 — Carburetor WT 396market-dependent · 023 L; Section 2 complete carburetor table and existing-part remark
- 1123 121 5631 — Fixed jet 0.46included with WT 396 · 023 L; Section 2 complete carburetor table and existing-part remark
Historical fitment · 023
023 L California: WT 396 carburetor assignment
TI24/1996 supplements the earlier market-dependent carburetor listing.
- Section 5 specifically states WT 396 carburetor 1123 120 0613 IS INSTALLED in 023 L saws FOR CALIFORNIA. This adds a named market to the earlier TI29/1995 statement that either WT 360 or WT 396 is used depending on market.
- This is not a universal WT 360→WT 396 replacement, not proof WT 396 is exclusive to California, and not an assignment for all 023 saws. No serial cutoff, jet change, emissions certification or tuning instruction is given by this supplement.
- TI29/1995 section 2 remains separately source-linked in the earlier market-carburetor note, including its jet-number conflict. This supplement does not resolve that 0.48-jet conflict or revise the earlier jet table; no prior source wording is erased.
- Later grouped IPL sheets R and N list 1123 120 0613 as WT-396 with a no-longer-available flag. Base-model 023 indexing is navigation only; the actual source restriction is 023 L for California.
- Historical TI24/1996 guidance only. No serial cutoff is stated; introduction is in progress, not a verified calendar date. Shared IPL sheets do not extend applicability to other variants or MS successor models. Supply statements are historical, not present stock guarantees. No hardware operation was performed.
Source: TI 24/1996, p. 1 · TI 24/1996, p. 4 — 023 L California: WT 396 carburetor assignment.
Part numbers (1)
- 1123 120 0613 — Carburetor WT 396Installed California-market version · 023 L for California
Wrong number or missing part for the 023? Report a correction →