← 084 · 088 · MS 780/880/881

Stihl 1124 · Section J · 9 of 14 · 19 parts

AV system

Fits 088.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112121213131415161723456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (19)

PosPart numberDescriptionQty
1 1125 791 2810 Stop buffer 1
2 1124 790 9900 Annular buffer 1
3 1124 790 9901 Annular buffer 1
4 1121 790 9912 Annular buffer 1
5 1124 790 9920 Annular buffer 1
6 1124 790 9908 Annular buffer 1
7 1124 790 9900 Annular buffer 1
8 1124 790 9905 Annular buffer 1
9 9022 341 0960 Spline screw IS-M5x12 → replaced by 9022 341 0980 TI 3/2006 2
10 1124 791 7605 Support 1
11 9022 341 1400 Spline screw IS-M6x40 1
12 9074 478 4435 Pan head self-tapping screw IS-P6x19 3
13 1124 791 7300 Plug 2
14 1119 791 7306 Plug 1
15 1119 791 8400 Ring 1
16 1124 791 8400 Ring 1
17 9022 341 1370 Spline screw IS-M6x30 1
Not numbered on the diagram — assemblies, kits and options
— not sold separately AV system normal:
— not sold separately AV system hard:

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · 088

088: antivibration paragraph names 046

The original 088 bulletin says 046; it does not establish an 088 buffer revision.

  • The original page reads: “The rubber buffers of the STIHL 046 have been tuned to reduce vibrations.” This is inside the 088 launch bulletin; the scan confirms 046, not an OCR substitution.
  • The intended model remains unresolved. Do not silently change 046 to 088 or infer that 046 buffers fit 088. No buffer ordering number, geometry or introduction serial is supplied. The note is linked here to expose the source inconsistency, not to assert positive fitment.

Source: TI 35/1996, p. 6 — Section1.9 exact model wording.

No additional parts-table entry added.

Wrong number or missing part for the 088? Report a correction →