Stihl 1124 · Section H · 8 of 14 · 25 parts
Tank housing
Fits 088.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (25)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1124 350 0823 | Tank housing | 1 |
| 2 | 1124 122 6610 | Collar screw | 2 |
| 3 | 0000 967 3662 | Warning pictogram MS | 1 |
| 4 | 0000 958 0513 | Washer | 2 |
| 5 | 0000 350 5800 | Tank vent → replaced by 0000 350 5804 TI 41/2003 | 1 |
| 6 | not sold separately | O-ring not available as a separate item | 1 |
| 7 | 0000 350 0525 | Filler cap | 1 |
| 8 | 9645 948 7734 | O-ring 25x3.5 | 1 |
| 9 | 0000 350 0509 | Filler cap | 1 |
| 10 | 0000 359 1203 | Sealing ring | 1 |
| 11 | 0000 359 1230 | Sealing ring | 1 |
| 12 | 0000 350 0900 | Rope | 1 |
| 13 | 1110 353 1600 | Valve | 1 |
| 14 | 1121 358 1800 | Filter → replaced by 1122 358 1800 TI 31/2000 | 1 |
| 15 | 1121 358 2500 | Cap | 1 |
| 16 | 1124 141 8603 | Impulse hose | 1 |
| 17 | 1124 141 1800 | Sleeve | 1 |
| 18 | 1124 141 2201 | Manifold → replaced by 1124 141 2202 TI 9/2009 | 1 |
| 19 | 9771 021 2630 | Hose clip 38x7 | 1 |
| 20 | 1125 647 8200 | Sleeve | 1 |
| 21 | not sold separately | Hose 3.1x5.7x130 mm, R5 not available as a separate item | 1 |
| 22 | 1124 122 3900 | Connector | 1 |
| 23 | 1124 358 7700 | Hose | 1 |
| 24 | 0000 350 3504 | Pickup body | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 0000 937 5004 | Hose 3.1x5.7 mm x 1 m, R5 not illustratedoption | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · 088
088: fuel tank vent construction
Cap, sintered filter and valve form the vacuum-equalization path.
- The vent valve opens as fuel is drawn from the tank while the saw runs. Tank vacuum is equalized via cap (3), sintered filter (2) and valve (1), as shown by the arrows.
- The cap protects the sintered filter from surface icing and permits air circulation in a low-dust area of the carburetor box. The sintered filter limits dirt entering the valve.
- No opening-pressure specification, vent ordering number, positive-pressure relief guarantee or interchange with 084 is stated.
Source: TI 35/1996, p. 5 — Section1.8 and drawing171TI006.
No additional parts-table entry added.
Wrong number or missing part for the 088? Report a correction →