Stihl 1125 · Section M · 12 of 19 · 26 parts
Air filter (08.2000), (31.2001)
Fits 034.
Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.
Parts (26)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1125 120 1600 | Air filter | 1 |
| 2 | 1125 120 1605 | Air filter | 1 |
| 3 | 1125 141 8300 | Slotted nut | 2 |
| 4 | 1125 120 1615 | Air filter, fleece Fitment / change note → | 1 |
| 5 | 1125 120 1620 | Air filter, fleece Fitment / change note → | 1 |
| 6 | 1125 140 1900 | Carburetor box cover | 1 |
| 7 | 1125 120 1501 | Prefilter Fitment / change note → | 1 |
| 8 | 1125 121 7700 | Guide piece | 1 |
| 9 | 1121 141 2300 | Twist lock | 1 |
| 10 | 0000 997 1335 | Compression spring | 1 |
| 11 | 1125 141 2101 | Detent | 1 |
| 12 | 9074 478 3025 | Pan head self-tapping screw IS-P4x16 | 1 |
| 13 | 1125 129 0500 | Gasket | 1 |
| 14 | 1125 140 1905 | Carburetor box cover option | 1 |
| 15 | 1125 084 8200 | Cover plate option | 1 |
| 16 | 9099 021 2360 | Self-tapping screw 3.5x9.5 option | 2 |
| 17 | 1125 140 1907 NLA | Carburetor box cover → replaced by 1125 007 1024 TI 44/2002 | 1 |
| 18 | 1121 141 2900 | Cover | 1 |
| 19 | 1130 141 2300 | Twist lock | 1 |
| 20 | 9438 929 4040 NLA | Blind rivet 5x8 | 7 |
| 21 | 1125 084 8200 | Cover plate | 1 |
| 22 | 9041 216 0650 | Pan head screw M4x10 | 1 |
| 23 | 1125 121 7701 | Guide piece | 1 |
| 24 | 1125 442 1601 | Contact spring | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1125 120 1610 | Air filter | 1 |
| — | 1125 007 1004 | Intake air preheating kit option | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Historical fitment · 034
034: prefilter replacement at X 33 781 153
1125 120 1500 becomes 1501; model-specific serial and compensator scope retained.
X 33 781 153 — 034 prefilter replacement from this machine number; not an established 036 cutoff or heating/shroud/nameplate introduction.
- Section 3 title says only 034 and036 without compensator. Body says replacement 1125 120 1500→1125 120 1501 in ALL 034 saws FROM X 33 781 153, AND in 036 saws WITHOUT compensator. The stated serial is attached to 034; no independent 036 cutoff established.
- Retain title/body wording rather than silently broadening to compensator-equipped036 or later034 conversion states. This is a prefilter change, NOT the introduction of VH heating, shrouds or plastic nameplates. No filter material, dimensional change or unconditional backwards-fit statement supplied.
- Exact-model IPL lists1501; later filter/cover conversions remain separate. Original scan confirms X 33 781 153 followed by and; OCR punctuation is not a serial suffix.
- Historical TI 21/1996 evidence only; no present stock status, calendar introduction date or universal retrofit inferred. No hardware operation was performed.
Source: TI 21/1996, p. 1 · TI 21/1996, p. 5 — prefilter replacement at X 33 781 153.
Part numbers (2)
- 1125 120 1500 — PrefilterOriginal · 034 from X33 781 153 in TI body; title scope retained
- 1125 120 1501 — PrefilterReplacement · 034 from X33 781 153 in TI body; title scope retained
Service note · 034 / 036
034 / 036: fleece filter under unchanged numbers
Fleece replaces flocked wire cloth; old stock, cleaning direction and replacement limits remain distinct.
- TI38/1996 replaces flocked wire cloth with fleece under UNCHANGED replacement-part numbers. Introduction is IN PROGRESS, without a serial cutoff. Remark 1 says the unmodified version is supplied until existing stocks are exhausted. A number alone therefore does not identify the material of an old-stock filter; this is a historical supply statement, not a current stock guarantee.
- Both 034/036 rows, 1125 120 1615 and 1125 120 1620, carry remarks 1 and 3; remark 3 says SEE TI30.95. TI38 does not declare these two numbers interchangeable or a single assembly ordering number.
- TI30/1995 page 7 identifies 1615 and 1620 as the ORIGINAL flocked halves, with new felt halves 1617 and 1622 in the different 036 compensator system. TI38 changes material under the older numbers; it does not collapse the two system generations.
- TI30/1995 page 5 restricts the new filter, compensator metering end cover and carburetor box cover to a COMPLETE ASSEMBLY on 036 from X 32 185 626, requiring lower tank-vent clearance. Production introduction X 32 622 640 is separate, and neither is a TI38 fleece cutoff. This does not authorize the full conversion on 034. The earlier TI28 tank-vent/cap-retainer serial conflict remains unresolved; verify actual configuration rather than serial alone.
- Later 034 sheet M cites TI08/2000 and TI31/2001 and retains these filter numbers; this is an exact-model navigation binding, not proof that its whole assembly existed in 1996. Original IPL contents and later restrictions remain unchanged.
- The source calls fleece especially suitable for dry and dusty conditions. Its rougher surface may look heavily contaminated when only lightly loaded; appearance alone does not establish loading. Clean DAILY OR when there is a noticeable loss of power during cutting. The observation about appearance does not cancel that interval.
- If possible, carefully blow out at LOW PRESSURE from the CLEAN AIR SIDE. For stubborn dirt or caked fleece, wash in a clean, NON-FLAMMABLE solution, for example warm soapy water. DO NOT CLEAN WITH A BRUSH: it forces dirt into the fleece. No pressure value, drying time or alternate solvent is specified.
- The source attributes improved filtering efficiency to the material structure, not a measured result here. Some trapped particles cannot be cleaned out; replace the filter when cleaning intervals become too short for practical use, or when noticeable cutting-power loss persists after thorough cleaning.
- Historical guidance for these named models and filter configurations only; no successor-model fitment, universal interchange or material identity inferred from a shared part number. No hardware operation was performed.
Source: TI 38/1996, p. 1 · TI 38/1996, p. 2 — Complete filter-material and servicing guidance; exact model summary rows and remarks.
Referenced bulletin evidence: TI 30/1995, p. 5 · TI 30/1995, p. 7 — Previously reviewed 036 complete-system restriction and original-versus-new filter-half rows.
Part numbers (2)
- 1125 120 1615 — Air filter, first printed rowunchanged older-system material-revision number · 034 / 036; TI38/1996 row and configuration conditions
- 1125 120 1620 — Air filter, second printed rowunchanged older-system material-revision number · 034 / 036; TI38/1996 row and configuration conditions
Wrong number or missing part for the 034? Report a correction →