Stihl 1125 · Section L · 11 of 19 · 34 parts
Air filter, Throttle control
Fits 034.
Historical fitment & changes (3) — includes parts and conditions not shown on this drawing.
Parts (34)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1125 120 0613 | Carburetor C3A-S31E | 1 |
| 1 | 1125 120 0617 NLA | Carburetor C3A-S38B → replaced by 1125 120 0651 TI 8/2000 | 1 |
| 1 | 1125 120 0606 | Carburetor C3A-S19 Fitment / change note → no longer available from factory | 1 |
| 2 | 1125 120 0615 | Carburetor C3A-S39B | 1 |
| 3 | 1125 123 7506 | Grommet | 1 |
| 4 | 1125 123 7501 | Grommet | 1 |
| 5 | 9210 260 0700 | Hexagon nut M5 | 2 |
| 6 | 1125 120 1602 | Air filter | 1 |
| 7 | 1125 121 9100 | Bushing | 1 |
| 8 | 1125 120 1607 | Air filter | 1 |
| 9 | 1125 122 4900 | Filter insert | 1 |
| 10 | 1125 141 8300 | Slotted nut | 1 |
| 11 | 1125 120 1617 | Air filter, fleece | 1 |
| 12 | 1125 120 1622 | Air filter, fleece | 1 |
| 13 | 1118 182 1006 | Throttle trigger | 1 |
| 14 | 1117 182 4500 | Torsion spring | 1 |
| 15 | 9371 470 2640 | Cylindrical pin 5x24 | 1 |
| 16 | 1125 182 1502 | Throttle rod | 1 |
| 17 | 1125 185 2002 | Choke rod Fitment / change note → | 1 |
| 18 | 1125 442 1601 | Contact spring | 1 |
| 19 | 1125 182 0901 | Switch shaft | 1 |
| 20 | 1117 182 0805 | Lockout lever | 1 |
| 22 | 1121 141 2900 | Cover | 1 |
| 23 | 1130 141 2300 | Twist lock | 1 |
| 24 | 1125 121 7700 | Guide piece | 1 |
| 25 | 1125 121 7701 | Guide piece | 1 |
| 26 | 1125 084 8203 | Cover plate option | 1 |
| 27 | 9041 216 0650 | Pan head screw M4x10 option | 1 |
| 28 | 1125 140 1907 NLA | Carburetor box cover → replaced by 1125 007 1024 TI 44/2002 option | 1 |
| 29 | 9438 929 4040 NLA | Blind rivet 5x8 option | 7 |
| 30 | 0000 967 3605 | Warning pictogram Filler cap | 1 |
| 31 | 0000 967 3692 | Warning pictogram Filler cap | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1125 120 1612 | Air filter | 1 |
| — | 1125 120 1626 | Air filter, fleece | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · 034 / 036
034 / 036 replacement carburetor: original end cover supplied
Carburetor 0651 includes cover 0803 for non-compensator 036 and 034 use.
- New replacement carburetor 1125 120 0651 replaces 1125 120 0606. New assembly rows include metering end cover 1125 121 0804 (replacing 1125 121 0803) and collar screw 1120 122 6601 (replacing 4132 122 6600). The original carburetor is NO LONGER factory available; original cover and collar screw remain spares for older machines.
- ORIGINAL END COVER 1125 121 0803 is ALSO included in new carburetor supply FOR 036 WITHOUT COMPENSATOR AND FOR 034. This supply provision is not authorization to retrofit the full 036 compensator system to 034. Factory introduction X 32 622 640 in this 036 bulletin must not become a 034 cutoff.
- Later 036 K lists 0613/0614/0609/0615/0612 and 034 L lists other carburetor numbers, not TI 0651. Later 036 L retains both end covers and both screw versions, but its carburetor model labels are not proof of the TI 0651 manufacturer/model. No universal carburetor supersession chain or adjustment setting inferred.
- Historical TI guidance for the named models and stated versions only. Shared series and later IPL sheets do not extend applicability to other variants or successors. Supply statements are historical, not present stock guarantees or verified physical interchange. No hardware operation was performed.
Source: TI 30/1995, p. 5 · TI 30/1995, p. 6 · TI 30/1995, p. 7 — Sections 1.2.1 and 1.2.3 carburetor rows 6–8 and remarks.
Part numbers (6)
- 1125 120 0606 — Original carburetorno longer factory available · 036 summary version change; not an additional 034 fitment claim
- 1125 120 0651 — Replacement carburetorincludes original cover for stated non-compensator use · 034 / 036; Sections 1.2.1 and 1.2.3 carburetor rows 6–8 and remarks
- 1125 121 0803 — Original end coverincluded for non-compensator use · 034 / 036; Sections 1.2.1 and 1.2.3 carburetor rows 6–8 and remarks
- 1125 121 0804 — New compensator end covernew assembly component · 036 summary version change; not an additional 034 fitment claim
- 4132 122 6600 — Original collar screwretained spare · 036 summary version change; not an additional 034 fitment claim
- 1120 122 6601 — New collar screwnew assembly component · 036 summary version change; not an additional 034 fitment claim
Historical fitment · 034 / 036
034/036: universal replacement contact spring
New connector tag accepts the thermostat flag; broader spare scope than the new 036 option.
- Contact spring 1121 442 1600 is replaced by 1125 442 1600 to coincide with the new carburetor heating system. Thermostatic-switch flag connector fits the tag indicated by the arrow in drawing 133TI013.
- Parts availability explicitly calls 1125 442 1600 a UNIVERSAL replacement for ALL versions of 034 and 036. This broader spring statement does not make the new VH carburetor option universal or establish a complete retrofit.
- Current 034 air-filter/control sheet shows 1125 442 1601; current 036 sheet has both1600 and1601. Retain the TI 1600 replacement claim and later IPL difference without inventing a 1600→1601 supersession or variant equivalence. No serial cutoff supplied.
- Historical TI 21/1996 evidence only; no present stock status, calendar introduction date or universal retrofit inferred. No hardware operation was performed.
Source: TI 21/1996, p. 1 · TI 21/1996, p. 2 — universal replacement contact spring.
Part numbers (2)
- 1121 442 1600 — Contact springOriginal · All versions of 034/036 per TI; assembly links are exact base-model sheets
- 1125 442 1600 — Contact spring with connector tagUniversal historical replacement · All versions of 034/036 per TI; assembly links are exact base-model sheets
Conditional replacement · 034 / 036
034 / 036: revised choke lever and throttle rod
Territory-related control changes are in progress; new parts may also be used on older machines.
in progress — Section 2 controls only; territories unspecified, no serial cutoff; new versions permitted on older machines.
- Choke lever 1125 185 2001 is deleted and replaced by 1125 185 2002 IN CONNECTION WITH MODIFICATIONS ON VERSIONS FOR CERTAIN SALES TERRITORIES. Territories are not named; this is not a global market identifier. Throttle rod 1125 182 1500 is replaced by 1125 182 1501.
- Both new versions CAN ALSO BE USED IN OLDER MACHINES. Introduction is IN PROGRESS, with NO SERIAL CUTOFF in section 2; do not transfer the tank-only X 39 108 850 cutoff. The two-row summary marks BOTH original versions NO LONGER AVAILABLE FROM FACTORY. No mandatory paired-kit installation, geometry, adjustment dimension or reciprocal old-part fit is stated.
- Exact 034 air-filter/throttle-control and 036 air-filter IPLs list new choke part 1125 185 2002 (called choke rod there), but list later throttle rod 1125 182 1502, NOT TI 11’s 1125 182 1501. The terminology and suffix difference are retained, not silently corrected or inferred as a further supersession. No extension to later MS 360 or QS control configurations from shared numbers.
- Historical TI 11/1998, models 034/036, series 1125; QS is included only where the tank section expressly names it. Shared parts do not extend these changes to MS 360 or other models. Factory supply statements are historical, not current availability. Source-stated replacement permission is not physical-fit verification. No hardware operation was performed.
Source: TI 11/1998, p. 3 — Section 2 complete prose, both summary rows, in-progress introduction and availability remark.
Part numbers (4)
- 1125 185 2001 — Original choke leverDeleted; no longer available from factory · 034/036; exact variants and conditions in this note
- 1125 185 2002 — New choke leverAlso usable on older machines · 034/036; exact variants and conditions in this note
- 1125 182 1500 — Original throttle rodNo longer available from factory · 034/036; exact variants and conditions in this note
- 1125 182 1501 — New throttle rodAlso usable on older machines; distinct from later IPL1502 · 034/036; exact variants and conditions in this note
Wrong number or missing part for the 034? Report a correction →