← 034 · 036 · MS 340/360

Stihl 1125 · Section L · 11 of 17 · 41 parts

Carburetor C3A-S31E, C3A-S65

Fits 036.

Parts diagrams →

Historical fitment & changes (4) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111213141516171819220212223242526282829330313233343536373839456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (41)

PosPart numberDescriptionQty
1 1125 121 5408 Valve jet 0.58 1
2 1125 121 5410 Valve jet 0.65 1
3 1120 122 7800 Oval head screw 1
4 1125 121 0802 End cover 1
5 1125 129 0900 Gasket 1
6 1128 121 4802 Pump diaphragm Fitment / change note → 1
7 1123 121 7800 Strainer 1
8 4116 121 5100 Inlet needle 1
9 1120 122 3004 Spring 1
10 1125 121 5000 Inlet control lever 1
11 1120 121 9200 Spindle 1
12 1120 122 6600 Collar screw 1
13 1123 121 0700 Cup plug 1
14 1125 129 0901 Gasket 1
15 1125 121 4700 Metering diaphragm 1
16 1125 121 0804 End cover Fitment / change note → 1
17 1120 122 6601 Collar screw Fitment / change note → 4
18 1125 122 4200 Clamp 1
19 1125 121 3301 Throttle shutter 1
20 1125 122 7402 Round head screw 1
21 1125 122 3202 Torsion spring 1
22 1125 120 7101 Throttle shaft with lever 1
23 1125 122 9001 E-clip 1
24 1125 122 3203 Torsion spring 1
25 1125 120 7201 Choke shaft with lever 1
26 1125 122 9003 E-clip 1
28 1120 122 3005 Spring 2
29 1125 122 6802 Low speed adjustment screw Fitment / change note → 1
30 1125 122 6702 High speed adjustment screw Fitment / change note → 1
31 1125 121 2901 Choke shutter 1
32 1125 122 7403 Round head screw 1
33 1125 121 0803 End cover Fitment / change note → 1
34 4132 122 6600 Collar screw Fitment / change note → 4
35 1125 121 5409 Valve jet 0.56 option 1
36 1125 121 5404 Valve jet Fitment / change note → 1
37 1125 121 5402 Valve jet 0.60 Fitment / change note → 1
38 1125 122 6801 Low speed adjustment screw Fitment / change note → 1
39 1125 122 6701 High speed adjustment screw Fitment / change note → 1
Not numbered on the diagram — assemblies, kits and options
— 1125 120 0613 Carburetor C3A-S31E 1
— 1125 120 0614 Carburetor CA-S65 1
— 1128 007 1065 Set of carburetor parts Fitment / change note → 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · 034S / 036 / 044

034S / 036 / 044: pump diaphragm changes inside the same kit

Pump diaphragm 1125 121 4802 changes to 1128 121 4802; carburetor parts kit 1128 007 1065 keeps its number while its contents change.

  • The new pump diaphragm uses a different material; the source does not identify that material or quantify compatibility with fuel blends.
  • The kit summary explicitly names 034S, 036 and 044 and includes item1 (pump diaphragm). The unmodified kit is supplied until existing stocks are exhausted, so kit number alone does not identify the installed diaphragm.
  • The old diaphragm is no longer factory supplied per remark1; this differs from the retained spare status of the valve jet, screws and shafts.
  • 034S is named by the source but has no exact-model catalog sheet bound here. Do not extend it to ordinary034,036QS,MS360 or other successor/variant sheets. The linked036 sheets contain this kit; the044 production serial is not a036/034S serial boundary.
  • TI16/1994 is dated March 21, 1994. Historical availability and production statements are not present inventory or verified physical interchange; no successor-model applicability is inferred.

Source: TI 16/1994, p. 3 · TI 16/1994, p. 4 — Sections2.1 and2.3, pump diaphragm and kit row.

Part numbers (3)
  • 1125 121 4802 — Original pump diaphragmHistorical version · Named kit configurations
  • 1128 121 4802 — Revised-material pump diaphragmHistorical version · Named kit configurations
  • 1128 007 1065 — Carburetor parts kitUnchanged number; changed contents · 034S / 036 / 044 as printed

Service note · 034 / 036

034 / 036 replacement carburetor: original end cover supplied

Carburetor 0651 includes cover 0803 for non-compensator 036 and 034 use.

  • New replacement carburetor 1125 120 0651 replaces 1125 120 0606. New assembly rows include metering end cover 1125 121 0804 (replacing 1125 121 0803) and collar screw 1120 122 6601 (replacing 4132 122 6600). The original carburetor is NO LONGER factory available; original cover and collar screw remain spares for older machines.
  • ORIGINAL END COVER 1125 121 0803 is ALSO included in new carburetor supply FOR 036 WITHOUT COMPENSATOR AND FOR 034. This supply provision is not authorization to retrofit the full 036 compensator system to 034. Factory introduction X 32 622 640 in this 036 bulletin must not become a 034 cutoff.
  • Later 036 K lists 0613/0614/0609/0615/0612 and 034 L lists other carburetor numbers, not TI 0651. Later 036 L retains both end covers and both screw versions, but its carburetor model labels are not proof of the TI 0651 manufacturer/model. No universal carburetor supersession chain or adjustment setting inferred.
  • Historical TI guidance for the named models and stated versions only. Shared series and later IPL sheets do not extend applicability to other variants or successors. Supply statements are historical, not present stock guarantees or verified physical interchange. No hardware operation was performed.

Source: TI 30/1995, p. 5 · TI 30/1995, p. 6 · TI 30/1995, p. 7 — Sections 1.2.1 and 1.2.3 carburetor rows 6–8 and remarks.

Part numbers (6)
  • 1125 120 0606 — Original carburetorno longer factory available · 036 summary version change; not an additional 034 fitment claim
  • 1125 120 0651 — Replacement carburetorincludes original cover for stated non-compensator use · 034 / 036; Sections 1.2.1 and 1.2.3 carburetor rows 6–8 and remarks
  • 1125 121 0803 — Original end coverincluded for non-compensator use · 034 / 036; Sections 1.2.1 and 1.2.3 carburetor rows 6–8 and remarks
  • 1125 121 0804 — New compensator end covernew assembly component · 036 summary version change; not an additional 034 fitment claim
  • 4132 122 6600 — Original collar screwretained spare · 036 summary version change; not an additional 034 fitment claim
  • 1120 122 6601 — New collar screwnew assembly component · 036 summary version change; not an additional 034 fitment claim

Historical fitment · 036

036: C3A-S26 to C3A-S31A calibration at X 35 047 484

1125 120 0651 keeps its number; old screws and valve jet must not be fitted to the modified carburetor.

X 35 047 484 — Printed introduction of the 0651 carburetor revision; not a separate established 034 replacement or VH-specific serial cutoff.

  • From machine number X 35 047 484, carburetor 1125 120 0651 changes type designation from C3A-S26 to C3A-S31A WITHOUT changing the assembly order number. The original scan ends the serial with a period, not the OCR suffix K. Same number alone cannot identify the installed calibration. The 034 replacement exception is separate; this is not a blanket 034/036 interchange rule.
  • Both complete-carburetor rows include summary items 3–5: valve jet 1125 121 5402 becomes 1125 121 5404; high-speed screw 1125 122 6701 becomes 1125 122 6702; low-speed screw 1125 122 6801 becomes 1125 122 6802. Modified H and L screws have a sealing ring for an airtight seal. No separate sealing-ring order number or dimensions are printed. All OTHER parts remain as before.
  • Original high-speed/low-speed screws and original valve jets MUST NOT be installed in the NEW carburetor: calibration differs, causing faulty adjustment and running problems. This prohibition is directional; it does not prove that new internals may be retrofitted into every old body. Original components remain available for C3A-S26 (remark 3), whereas only the modified complete assembly is factory supplied (remark 1). Historical supply is not current availability.
  • Between idle and full throttle, including limbing, the source describes an over-lean part-load flat spot. The revised body gains a PART-LOAD FIXED JET to help prevent it. That jet CANNOT BE REMOVED; it may be blown clear with compressed air. Do not confuse this fixed jet with the separately numbered valve jet, drill it out or invent a pressure, jet size or H/L setting. The claimed improvement is source guidance, not a measured result.
  • The later linked IPL is titled C3A-S31E/C3A-S65 and includes both old/new screws and multiple valve jets. It provides a discovery location for the exact 036 components, NOT evidence that S31A, S31E and S65 have identical calibration. Later 0613/0614 assemblies and other jet sizes do not silently replace the TI 0651 identity or its restriction.
  • Historical TI 32/1996 evidence; not current stock or verified physical interchange. No hardware operation was performed.

Source: TI 32/1996, p. 1 — 036: C3A-S26 to C3A-S31A calibration at X 35 047 484.

Part numbers (7)
  • 1125 120 0651 — Carburetor, original C3A-S26 / modified C3A-S31AUnchanged number; each includes items 3–5 · 036; identify the actual carburetor revision
  • 1125 121 5402 — Original valve jetRetained for C3A-S26 · C3A-S26 versus modified C3A-S31A; do not mix original internals into new body
  • 1125 121 5404 — Modified valve jetNew calibration · C3A-S26 versus modified C3A-S31A; do not mix original internals into new body
  • 1125 122 6701 — Original high-speed screwRetained for C3A-S26 · C3A-S26 versus modified C3A-S31A; do not mix original internals into new body
  • 1125 122 6702 — Modified high-speed screwNew sealing-ring design · C3A-S26 versus modified C3A-S31A; do not mix original internals into new body
  • 1125 122 6801 — Original low-speed screwRetained for C3A-S26 · C3A-S26 versus modified C3A-S31A; do not mix original internals into new body
  • 1125 122 6802 — Modified low-speed screwNew sealing-ring design · C3A-S26 versus modified C3A-S31A; do not mix original internals into new body

Service note · 036 / 036 QS

036 / 036 QS: C3A-S31A valve jet and unchanged order number

0.64 mm → 0.60 mm valve jet; earlier source identity conflict remains unresolved.

  • C3A-S31 becomes C3A-S31A while carburetor order number 1125 120 0651 stays unchanged. Each of the two listed carburetor families receives valve jet 1125 121 5404 (diameter 0.60 mm) instead of 1125 121 5403 (diameter 0.64 mm). All other parts remain as before in THIS bulletin; the dashes separate old/new type rows, not missing order numbers.
  • Modification introduction is IN PROGRESS. No machine-number cutoff is printed; do not reuse the earlier TI32/1996 serial as this changeover. Remark 1 says only the modified carburetor version is factory supplied; remark 2 says the original valve jet is no longer factory supplied. These are historical supply statements, not current stock or blanket retrofit approval.
  • SOURCE CONFLICT RETAINED: the already-reviewed TI32/1996 describes 1125 120 0651 as C3A-S26 → C3A-S31A and valve jet 1125 121 5402 → 1125 121 5404, extending its changes to VH assembly 1125 120 0609. TI06/1997 instead prints C3A-S31 → C3A-S31A and 1125 121 5403 → 1125 121 5404. Both accounts are preserved; whether they describe market/version differences or an error is unresolved. Do not silently rewrite either original identity or infer a universal calibration sequence.
  • The header names 036 and 036 QS, series 1125. Applicability remains conditional on the named carburetor, not every carburetor fitted to either saw. No 034, MS360 or other successor applicability is inferred. Later IPL C3A-S27D and C3A-S31E/C3A-S65 labels are discovery context, not proof of identical internal calibration or a substitute for identifying the fitted version.
  • Historical TI06/1997 evidence; dimensions describe the valve jet, not the nonremovable part-load fixed jet in TI32. No adjustment settings, drilling instruction or tested physical interchange are established. No hardware operation was performed.

Source: TI 6/1997, p. 1 — C3A-S31 to C3A-S31A unchanged-number valve-jet revision.

Referenced bulletin evidence: TI 32/1996, p. 1 — 036: C3A-S26 to C3A-S31A calibration at X 35 047 484.

Part numbers (3)
  • 1125 120 0651 — Carburetor C3A-S31 / C3A-S31AUnchanged assembly number · TI06/1997 C3A-S31/C3A-S31A; identify actual version
  • 1125 121 5403 — Original valve jet, diameter 0.64 mmOriginal version · TI06/1997 C3A-S31/C3A-S31A; identify actual version
  • 1125 121 5404 — Modified valve jet, diameter 0.60 mmNew version · TI06/1997 C3A-S31/C3A-S31A; identify actual version

Wrong number or missing part for the 036? Report a correction →