← 034 · 036 · MS 340/360

Stihl 1125 · Section P · 15 of 17 · 22 parts

Carburetor box cover

Fits 036.

Parts diagrams →

Historical fitment & changes (5) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415161718192222033344556667899
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (22)

PosPart numberDescriptionQty
1 1125 140 1903 Carburetor box cover Fitment / change note → → replaced by 1125 140 1913 TI 44/2002 1
2 1121 141 2900 Cover Fitment / change note → 1
3 1130 141 2300 Twist lock Fitment / change note → 1
4 1125 140 1907 NLA Carburetor box cover Fitment / change note → → replaced by 1125 007 1024 TI 44/2002 option 1
5 9438 929 4040 NLA Blind rivet 5x8 option 7
6 1125 121 7700 Guide piece Fitment / change note → 1
7 1125 121 7701 Guide piece Fitment / change note → 1
8 1125 084 8203 Cover plate option 1
9 9041 216 0650 Pan head screw M4x10 option 1
10 1125 084 8202 NLA Cover plate option 1
11 1125 084 8201 NLA Cover plate option 1
12 9099 021 2360 Self-tapping screw 3.5x9.5 option 2
13 1125 140 1904 Carburetor box cover no longer available from factory 1
14 1125 120 1501 Prefilter Fitment / change note → 1
15 1121 141 2300 Twist lock Fitment / change note → 1
16 0000 997 1335 Compression spring Fitment / change note → 1
17 1125 141 2101 Detent Fitment / change note → 1
18 9074 478 3025 Pan head self-tapping screw IS-P4x16 1
19 0000 967 3605 Warning pictogram Filler cap 1
20 0000 967 3692 Warning pictogram Filler cap 1
Not numbered on the diagram — assemblies, kits and options
— 1125 007 1042 NLA Intake air preheating kit option 1
— 1125 007 1037 NLA Intake air preheating kit Fitment / change note → option 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · 036

036 compensator retrofit: complete assembly and lower tank vent required

Retrofit threshold X 32 185 626 is not factory introduction X 32 622 640.

  • 036 retrofit restriction: ONLY from X 32 185 626, with the LOWER tank vent providing clearance, and ONLY AS A COMPLETE ASSEMBLY of air filter, metering end cover with compensator connector and carburetor box cover. Factory introduction X 32 622 640 is a DIFFERENT threshold. TI28/1995 reverses its tank-vent and cap-retainer serials between prose and summary; TI30 agrees with its vent prose but is not an explicit correction. Preserve that conflict; verify the actual housing/vent configuration, not serial alone.
  • New filter has a much larger area, felt fabric, inner-half opening for the compensator connector and retaining lugs for the carburetor box cover. Sleeve 1125 121 9100 connects the clean-air side to the connector on the modified metering end cover, exposing the OUTSIDE of the metering diaphragm to clean-air pressure.
  • The TI describes this compensator as preventing mixture enrichment as the filter gets dirty, so the high-speed screw need not be readjusted merely for increasing filter contamination. This is a historical functional claim, not a guarantee for damaged filters or a deletion of maintenance. No numeric filtration efficiency, service interval or carburetor setting is supplied.
  • Page 6 explicitly separates ORIGINAL upper diagram from NEW lower diagram. Their item numbers resolve against page 7, not later IPL positions. The complete-system restriction is not permission to mix individual new and old filter/cover components.
  • Historical TI guidance for the named models and stated versions only. Shared series and later IPL sheets do not extend applicability to other variants or successors. Supply statements are historical, not present stock guarantees or verified physical interchange. No hardware operation was performed.

Source: TI 30/1995, p. 1 · TI 30/1995, p. 4 · TI 30/1995, p. 5 · TI 30/1995, p. 6 · TI 30/1995, p. 7 — Section 1.2 features, 1.2.2 restrictions and assembly figures.

Part numbers (3)
  • 1125 121 9100 — Compensator sleeveclean-air connection · 036; Section 1.2 features, 1.2.2 restrictions and assembly figures
  • 1125 121 0804 — Metering end cover with connectorcomplete-system component · 036; Section 1.2 features, 1.2.2 restrictions and assembly figures
  • 1125 140 1903 — Carburetor box covercomplete-system component · 036; Section 1.2 features, 1.2.2 restrictions and assembly figures

Service note · 036

036 carburetor box cover: seasonal shutter and changed components

Summer seals the molded screen; winter moves the cover into the lower slot.

  • 036 retrofit restriction: ONLY from X 32 185 626, with the LOWER tank vent providing clearance, and ONLY AS A COMPLETE ASSEMBLY of air filter, metering end cover with compensator connector and carburetor box cover. Factory introduction X 32 622 640 is a DIFFERENT threshold. TI28/1995 reverses its tank-vent and cap-retainer serials between prose and summary; TI30 agrees with its vent prose but is not an explicit correction. Preserve that conflict; verify the actual housing/vent configuration, not serial alone.
  • Combustion air intake moves from the TOP gap to the BOTTOM between carburetor box cover and tank housing. A twist-lock lever (1) turns 90 degrees to secure the cover to the filter. Original wire-mesh prefilter is replaced by an integrally molded plastic screen.
  • SUMMER: cover (2), ordering number 1121 141 2900 in the summary, seals the screen. WINTER: remove this cover and fit it in the SLOT AT THE BOTTOM of the carburetor box cover (figure arrow), allowing warm cylinder air to mix with cold air. No temperature threshold or all-winter operating permission is supplied.
  • Carburetor box cover 1125 140 1902 becomes 1125 140 1903, including items 10–15 as applicable to each version. Original prefilter 1125 120 1500, helical spring 0000 997 1335, detent 1125 141 2101 and B3.9 x16 self-tapping screw 9099 021 2790 have DASHES in the new column; they are not components to transfer into the new cover. Twist lock 1121 141 2300 becomes 1130 141 2300; new cover 1121 141 2900 is added.
  • Original cover and marked original components remain spares for older machines; all other parts as before. Factory introduction X 32 622 640. Later sheet P also lists cover 1904/prefilter 1501 and screw 9074 478 3025, differing from the TI original 1902/1500/9099 021 2790; no supersession inferred.
  • Historical TI guidance for the named models and stated versions only. Shared series and later IPL sheets do not extend applicability to other variants or successors. Supply statements are historical, not present stock guarantees or verified physical interchange. No hardware operation was performed.

Source: TI 30/1995, p. 5 · TI 30/1995, p. 6 · TI 30/1995, p. 7 — Section 1.2 cover operation and summary rows 9–15.

Part numbers (9)
  • 1125 140 1902 — Original carburetor box coverold spare · 036; Section 1.2 cover operation and summary rows 9–15
  • 1125 140 1903 — New carburetor box covermodified air system · 036; Section 1.2 cover operation and summary rows 9–15
  • 1125 120 1500 — Original wire-mesh prefilterdeleted from new configuration; old spare · 036; Section 1.2 cover operation and summary rows 9–15
  • 1121 141 2300 — Original twist lockold spare · 036; Section 1.2 cover operation and summary rows 9–15
  • 1130 141 2300 — New twist lock90-degree lever · 036; Section 1.2 cover operation and summary rows 9–15
  • 0000 997 1335 — Original helical springold configuration only · 036; Section 1.2 cover operation and summary rows 9–15
  • 1125 141 2101 — Original detentold configuration only · 036; Section 1.2 cover operation and summary rows 9–15
  • 9099 021 2790 — Original B3.9x16 screwold configuration only · 036; Section 1.2 cover operation and summary rows 9–15
  • 1121 141 2900 — Seasonal coversummer screen seal; winter lower slot · 036; Section 1.2 cover operation and summary rows 9–15

Service note · 036

036 new-filter kits: preheating and ElastoStart contents

New kits retain their separate cover and paired-filter-half inclusions.

  • 036 retrofit restriction: ONLY from X 32 185 626, with the LOWER tank vent providing clearance, and ONLY AS A COMPLETE ASSEMBLY of air filter, metering end cover with compensator connector and carburetor box cover. Factory introduction X 32 622 640 is a DIFFERENT threshold. TI28/1995 reverses its tank-vent and cap-retainer serials between prose and summary; TI30 agrees with its vent prose but is not an explicit correction. Preserve that conflict; verify the actual housing/vent configuration, not serial alone.
  • For 036 WITH THE NEW AIR FILTER SYSTEM, intake air preheating kit 1125 007 1035 becomes 1125 007 1037. Included carburetor box cover 1125 140 1906 becomes 1125 140 1907. All other kit parts as before; this is not a complete newly enumerated kit roster.
  • Repair kit (ElastoStart) 1125 900 5002 becomes 1125 900 5004, INCLUDING FILTER ITEMS 1 AND 2. The TI does not select a single material-specific pair from the multiple item1/item2 rows or print a complete starter-component inventory; do not invent that specificity.
  • Original kits and original preheating cover remain available for older machines. Factory introduction X 32 622 640. Later sheet P lists 1037 and 1907; the note does not silently substitute later kit 1042 or assume kits universally interchangeable.
  • Historical TI guidance for the named models and stated versions only. Shared series and later IPL sheets do not extend applicability to other variants or successors. Supply statements are historical, not present stock guarantees or verified physical interchange. No hardware operation was performed.

Source: TI 30/1995, p. 5 · TI 30/1995, p. 7 — Sections 1.2.2 and 1.2.3 special accessories.

Part numbers (6)
  • 1125 007 1035 — Original preheating kitolder-machine spare · 036; Sections 1.2.2 and 1.2.3 special accessories
  • 1125 007 1037 — New preheating kitnew filter system · 036; Sections 1.2.2 and 1.2.3 special accessories
  • 1125 140 1906 — Original preheating coverincluded in old kit · 036; Sections 1.2.2 and 1.2.3 special accessories
  • 1125 140 1907 — New preheating coverincluded in new kit · 036; Sections 1.2.2 and 1.2.3 special accessories
  • 1125 900 5002 — Original ElastoStart repair kitolder-machine spare · 036; Sections 1.2.2 and 1.2.3 special accessories
  • 1125 900 5004 — New ElastoStart repair kitincludes filter items 1 and 2 · 036; Sections 1.2.2 and 1.2.3 special accessories

Historical fitment · 036

036: prefilter replacement only without compensator

1125 120 1500 becomes 1501; model-specific serial and compensator scope retained.

  • Section 3 title says only 034 and036 without compensator. Body says replacement 1125 120 1500→1125 120 1501 in ALL 034 saws FROM X 33 781 153, AND in 036 saws WITHOUT compensator. The stated serial is attached to 034; no independent 036 cutoff established.
  • Retain title/body wording rather than silently broadening to compensator-equipped036 or later034 conversion states. This is a prefilter change, NOT the introduction of VH heating, shrouds or plastic nameplates. No filter material, dimensional change or unconditional backwards-fit statement supplied.
  • Exact-model IPL lists1501; later filter/cover conversions remain separate. Original scan confirms X 33 781 153 followed by and; OCR punctuation is not a serial suffix.
  • Historical TI 21/1996 evidence only; no present stock status, calendar introduction date or universal retrofit inferred. No hardware operation was performed.

Source: TI 21/1996, p. 1 · TI 21/1996, p. 5 — prefilter replacement only without compensator.

Part numbers (2)
  • 1125 120 1500 — PrefilterOriginal · 036without compensator; no established serial cutoff
  • 1125 120 1501 — PrefilterReplacement · 036without compensator; no established serial cutoff

Historical fitment · 036

036 carburetor cover: same number, guide no longer included

1125 140 1903 loses the adjustment symbol; the replacement guide must be sourced separately.

  • Replacement cover 1125 140 1903 retains its number but is supplied WITHOUT the carburetor adjustment symbol. Only the modified version is available from factory (remark 5). Same number does not identify the original marking or package contents.
  • Guide 1125 121 7701 replaces 1125 121 7700 and is NO LONGER INCLUDED with the cover (remark 6); original guide remains available as a spare (remark 1). The table heading under the cover still says including item 13, but section 4 and remark 6 explicitly exclude the NEW guide. Retain that old/new inclusion distinction rather than treating the heading as a current kit promise.
  • Historical TI43/1997 guidance for the named 036 configuration only, not 034, MS 360 or every 036 variant. Supply remarks describe 1997, not current stock or verified physical interchange. No hardware operation was performed.

Source: TI 43/1997, p. 4 · TI 43/1997, p. 6 — Section4; summary items12/13 and remarks1/5/6.

Part numbers (3)
  • 1125 140 1903 — Carburetor box coverUnchanged number; modified marking/package · 036; Section4; summary items12/13 and remarks1/5/6
  • 1125 121 7700 — Original guideRetained spare · 036; Section4; summary items12/13 and remarks1/5/6
  • 1125 121 7701 — New guideNot included with new cover · 036; Section4; summary items12/13 and remarks1/5/6

Wrong number or missing part for the 036? Report a correction →