Stihl 1125 · Section O · 14 of 17 · 13 parts
Shroud
Fits 036.
Historical fitment & changes (4) — includes parts and conditions not shown on this drawing.
Parts (13)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1125 080 1620 | Shroud → replaced by 1125 080 1622 TI 44/2002 | 1 |
| 2 | 1125 080 1617 NLA | Shroud | 1 |
| 3 | 1122 084 7100 | Cap Fitment / change note → | 1 |
| 4 | 1128 792 0900 | Reflector foil | 1 |
| 5 | 1121 084 7000 | Slotted nut | 1 |
| 6 | 1121 084 6901 | Insulator | 1 |
| 7 | 1125 080 8000 | Shutter Fitment / change note → | 1 |
| 8 | 9646 945 0590 | O-ring 8x2 Fitment / change note → | 1 |
| 9 | 9099 021 3760 | Self-tapping screw 4.8x13 Fitment / change note → | 1 |
| 10 | 1121 084 7100 | Cap | 1 |
| 11 | 1125 967 1508 | Model plate 036 Fitment / change note → | 1 |
| 12 | 1125 967 1505 | Model plate 036 Fitment / change note → | 1 |
| 13 | 0000 974 1000 | Round head rivet 3x6 Fitment / change note → | 2 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · 034 / 036
034 / 036 winter shutter: grooved version with O-ring
8000 replaces 4100; intermediate-setting notches deleted.
- New rotary shutter has a groove for a B8 x 2 O-ring; the NOTCHES FOR DIFFERENT INTERMEDIATE SETTINGS ARE DELETED. This is not evidence for retained indexed intermediate positions or a new winter-temperature threshold.
- Original shutter 1125 084 4100 is no longer available as a separate item; summary says no longer factory available. Replacement 1125 080 8000 includes O-ring 9646 945 0590 (B8 x 2, figure 1) and self-tapping screw 9099 021 3760 (B4.8 x 13, figure 2). The supplied assembly and its component numbers must not be flattened into three shutter alternatives.
- Introduction IN PROGRESS, no serial cutoff or machining direction. Later 034 R keys 3–5 and 036 O keys 7–9 list this shutter/O-ring/screw set. Later shroud revisions and dates do not become an invented 1995 shutter changeover.
- Historical TI guidance for the named models and stated versions only. Shared IPL sheets or series do not extend applicability to other variants or successor models. Supply statements are historical, not present stock guarantees or verified physical interchange. No hardware operation was performed.
Source: TI 28/1995, p. 3 · TI 28/1995, p. 4 — Section 3 figure and complete summary.
Part numbers (4)
- 1125 084 4100 — Original rotary shutterno longer factory available · 034 / 036; Section 3 figure and complete summary
- 1125 080 8000 — Rotary shutter assemblyreplacement; includes items 1–2 · 034 / 036; Section 3 figure and complete summary
- 9646 945 0590 — O-ring B8 x 2included item 1 · 034 / 036; Section 3 figure and complete summary
- 9099 021 3760 — Self-tapping screw B4.8 x 13included item 2 · 034 / 036; Section 3 figure and complete summary
Service note · 036
036 replacement shroud: seal the opening on saws without a valve
Raised valve guard, dust cover and blanking cap have different functions.
- Shroud 1125 080 1612 becomes 1125 080 1614, including cap 1122 084 7100. The opening has a raised area to protect the valve from accidental contact. Cover 1122 084 1405 fits BETWEEN CYLINDER AND SHROUD to reduce dust entry; it is not the blanking cap.
- When the new replacement shroud is fitted to a machine WITHOUT A DECOMPRESSION VALVE, the opening MUST BE SEALED with the provided cap 1122 084 7100. This does not authorize drilling a cylinder or adding a valve to every old saw.
- SUPPLY WORDING DIFFERENCE: prose says ONLY THE NEW SHROUD is available as a replacement; summary remark 1 says original shroud supplied only while existing stocks last. Retain both, without inventing the stock-exhaustion date. Factory change X 32 622 640. Later sheet O lists shrouds 1125 080 1620/1617, not the TI 1612/1614 pair; no replacement chain inferred.
- Historical TI guidance for the named models and stated versions only. Shared series and later IPL sheets do not extend applicability to other variants or successors. Supply statements are historical, not present stock guarantees or verified physical interchange. No hardware operation was performed.
Source: TI 30/1995, p. 2 · TI 30/1995, p. 3 — Section 1.1 shroud figures and summary.
Part numbers (4)
- 1125 080 1612 — Original shroudstocks-only summary; prose says new only · 036; Section 1.1 shroud figures and summary
- 1125 080 1614 — New shroudincludes blanking cap · 036; Section 1.1 shroud figures and summary
- 1122 084 7100 — Blanking caprequired when no decompression valve · 036; Section 1.1 shroud figures and summary
- 1122 084 1405 — Dust coverbetween cylinder and shroud · 036; Section 1.1 shroud figures and summary
Historical fitment · 034 / 036
034/036: same-number shrouds and spare shutter exception
Production omits shutter hardware; replacement shrouds retain it, except 036 QS.
- Prose says rotary shutter, B4.8x13 self-tapping screw and O-ring will NO LONGER be fitted on production034/036. Replacement shrouds WITH those parts remain available, EXCEPT 036 QS. Do not broaden the spare policy to QS or infer it has the same replacement shroud.
- Table keeps shroud 034: 1125 080 1603 and shroud 036: 1125 080 1614 unchanged in BOTH columns. Each includes items 1–3; shutter 1125 080 8000 includes screw 9099 021 3760 and O-ring 8.0x2.0, 9646 945 0590. All three hardware numbers also unchanged.
- Remark1 says ONLY modified version available from factory. Remark2 says hardware is NOT included in ORIGINAL version of shrouds. Preserve this table/prose terminology tension alongside production omission and spare inclusion; same part number alone cannot establish which physical configuration is present. No reversal or silent correction of the table.
- Introduction in progress; no serial cutoff. Current 034 sheet includes 1603 and later1617, current 036 sheet 1620/1617 and later1622 supersession. These later editions do not rewrite TI 1603/1614 or establish this changeover date.
- Historical TI 21/1996 evidence only; no present stock status, calendar introduction date or universal retrofit inferred. No hardware operation was performed.
Source: TI 21/1996, p. 1 · TI 21/1996, p. 4 — same-number shrouds and spare shutter exception.
Part numbers (5)
- 1125 080 1603 — 034 shroudSame original/new number · 034 or036 as named; replacement-shroud policy excludes036 QS
- 1125 080 1614 — 036 shroudSame original/new number · 034 or036 as named; replacement-shroud policy excludes036 QS
- 1125 080 8000 — Rotary shutterIncludes screw and O-ring · 034 or036 as named; replacement-shroud policy excludes036 QS
- 9099 021 3760 — Self-tapping screw B4.8x13Shutter hardware · 034 or036 as named; replacement-shroud policy excludes036 QS
- 9646 945 0590 — O-ring 8.0x2.0Shutter hardware · 034 or036 as named; replacement-shroud policy excludes036 QS
Historical fitment · 036
036: clip-in plastic nameplate requires revised shroud
Two retaining lugs require countersunk holes; old aluminium plate and rivets remain spares.
- Original riveted ALUMINIUM nameplate changes to clip-in PLASTIC, retained by TWO lugs in countersunk shroud holes. Plastic plate CANNOT fit the ORIGINAL shroud because its holes are not countersunk. No drilling/conversion procedure or universal plate interchange authorized by this TI.
- Table: 1125 967 1505 becomes 1125 967 1508. Each original plate includes TWO round-head rivets3x6, 0000 974 1000; new column is---. Aluminium plates and rivets remain available for older machines under remark1. Spare availability is historical, not present stock.
- Change expected in near future/introduction in progress; no serial cutoff. X33 781 153 belongs to 034 PREFILTER, not these plates. Current exact-model sheet lists both old and new plates. Current 036 IPL also shows rivet quantity2.
- Footer TI 30/1995 is a previous-information pointer, not a mandatory missing procedure or supersession of these statements.
- Historical TI 21/1996 evidence only; no present stock status, calendar introduction date or universal retrofit inferred. No hardware operation was performed.
Source: TI 21/1996, p. 1 · TI 21/1996, p. 5 — clip-in plastic nameplate requires revised shroud.
Part numbers (3)
- 1125 967 1505 — Aluminium nameplate 036Original; spare retained · 036
- 1125 967 1508 — Plastic nameplate 036New; revised shroud only · 036
- 0000 974 1000 — Round-head rivet3x6, twoOriginal plate only; retained spare · 036
Wrong number or missing part for the 036? Report a correction →